GMC Yukon XL 1500 Towing Products

Essential GMC Yukon XL 1500 Towing Products

CURT – Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 30 Mins (Part No.13422)

Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 30 Mins

from

$219.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Cadillac Escalade, Chevy Avalanche, Chevy Suburban, Chevy Tahoe and GMC Yukon (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 6,000 lbs. gross trailer weight and 600 lbs. tongue weight
  • Compatible with weight distribution hitch (10,000 lbs. WD / 1,000 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

GM Genuine Parts – Trailer Brake Control Switch Assembly (Part No.15926102)

Trailer Brake Control Switch Assembly

from

$36.99
GM Genuine Parts Trailer Brake Controls are designed, engineered, and tested to rigorous standards, and are backed by General Motors. the brake controls signal a trailer’s brake system when the driver presses on the brake pedal and adjusts how much braking power is needed to stop the trailer. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Trailer Brake Continue Relay Assembly (Part No.20904439)

Trailer Brake Continue Relay Assembly

from

$84.99
GM Genuine Parts Trailer Tow Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays function as an electro-mechanical switch containing a coil and set of connection points. These trailer tow relays provide a variety of control functions for a vehicle’s trailer brake system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

CURT – Front Mount Hitch with 2in. Receiver (Part No.31012)

Front Mount Hitch with 2in. Receiver

from

$269.99
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Cadillac Escalade, Chevy Avalanche, Silverado 1500, Suburban 1500 or Tahoe and GMC Sierra 1500 or Yukon (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Product Features:
  • Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
  • Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
  • Engineered with a vehicle-specific design for a custom fit
  • Provides a convenient mount for hitch accessories
  • Ideal for attaching a snow plow, cargo carrier or other front hitch mount
  • Allows for easy maneuvering of a trailer into a tight spot
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
See More

Milemarker – HI10500; Hydraulic Winch (Part No.75-50050C)

HI10500; Hydraulic Winch

from

$1886.99
Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.

Product Features:
  • Mounts To Front Of Vehicle
  • Can Be Permanent Or Detachable
  • Free spooling; Mechanical Lock
  • Sealed Against Elements; Can Be Used Under Water
  • Stainless Steel Tie Bars And Fasteners
  • Reversible Mounting
  • Limited Warranty
See More

Milemarker – Winch Hydraulic Fittings (Part No.35-5020-15)

Winch Hydraulic Fittings

from

$124.99
For use with 75 Series and HI Series winches.

Product Features:
  • Winch Hydraulic Fittings
See More

Husky Towing – Wire Connector Univ (Part No.31866)

Wire Connector Univ

from

$21.99
Husky custom wiring harnesses fits all Husky brake controls that have a similar shaped plug. Simply attach the adapter to the Husky brake control. The safest or easiest way to wire a brake control to your tow prepped vehicle.

Product Features:
  • The Safest Or Easiest Way To Wire A Brake Control To Your Tow Prepped Vehicle
  • Simply Attach The Adapter To The Brake Control
  • Limited 90 Day Warranty
See More

K-Source – Towing Mirror Assembly: Both Sides, Power Adjustment, Heated, Foldable, 2 Pk (Part No.62075-76G)

Towing Mirror Assembly: Both Sides, Power Adjustment, Heated, Foldable, 2 Pk

from

$406.99
Original Equipment Manufacturer Style Replacement Side View Towing Mirror Set. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:
  • Driver and passenger side Mirrors are included in the set, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
  • Mirror glass is power adjustable and heated, with turn signal
  • OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
  • Manual folding for additional clearance
  • Textured Black
See More

Dorman – Trailer Hitch Electrical Connector Plug (Part No.924-307)

Trailer Hitch Electrical Connector Plug

from

$33.99
This trailer hitch plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this trailer hitch plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Husky Towing – 4-Way Flat And 7 Rav, With Dust Cover/ Cable Ties And Grease Packet (Part No.13092)

4-Way Flat And 7 Rav, With Dust Cover/ Cable Ties And Grease Packet

from

$51.99
Husky Towing Products offers a complete line of hitches, brake assemblies, jacks, sway control solutions, and essential towing accessories. Each Husky product is precision engineered, constructed with durable, quality materials, and is rigorously tested to industry safety standards. Hitches are what Husky does best. From Class III receivers, to 5th wheels, to weight distribution hitches, Husky hitches help keep your towables safe and secure. Husky also offers accessories to accompany your hitch including hitch balls, shanks, locks, and more Electric tongue jacks, electrical and brake products, and cargo carriers are just a few other categories that make any towing experience easier.

Product Features:
  • Husky Branded Replacement Parts Ensure Proper Fit And Function
  • Weatherproof Design
  • Constructed with durable, quality materials, and is rigorously tested to industry safety standards
  • Easy to install
See More

CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L (Part No.114032)

Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L

from

$279.99
LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.

Product Features:
  • Easier Entry And Exit From Your Vehicle
  • Wide Functional Step Area
  • Extends Further Than Our Current Steps
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
  • New Aggressive And Appealing Tread Design For A Non-Slip Surface
  • Unique Design That Enhances The Looks Of Current Vehicle Body Styles
  • Resists Scratches, Peeling And Fading
  • Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
See More

CURT – Front Mount Trailer Hitch for Cadillac Escalade, Chevy & GMC SUVs (Part No.31302)

Front Mount Trailer Hitch for Cadillac Escalade, Chevy & GMC SUVs

from

$247.99
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Cadillac Escalade, Chevy Avalanche, Chevy Silverado, Chevy Suburban, Chevy Tahoe, GMC Sierra and GMC Yukon (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Product Features:
  • Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
  • Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
  • Engineered with a vehicle-specific design for a custom fit
  • Provides a convenient mount for hitch accessories
  • Ideal for attaching a snow plow, cargo carrier or other front hitch mount
  • Allows for easy maneuvering of a trailer into a tight spot
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
See More

KAI – Tow Hook Cover (Part No.GM1129106)

Tow Hook Cover

from

$26.99
New Standard Replacement Rear Bumper Tow Hitch Hole Cover, For Denali And LTZ Models

Product Features:
  • For Denali And LTZ Models, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Milemarker – Winch Cradle (Part No.60-06495)

Winch Cradle

from

$249.99
Fits a 2 inch receiver hitch. Can be used in the front, back, or on another vehicle.

Product Features:
  • Winch Cradle
See More

GM Genuine Parts – Trailer Brake Control Module Assembly (Part No.20850923)

Trailer Brake Control Module Assembly

from

$125.99
GM Genuine Parts Trailer Brake Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

CURT – Trailer Brake Controller Harness, Select Cadillac, Chevrolet, GMC (Part No.51342)

Trailer Brake Controller Harness, Select Cadillac, Chevrolet, GMC

from

$19.49
A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle’s factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Cadillac Escalade, Escalade EXT, Chevy Silverado or GMC Sierra 1500, 1500HD, 2500, 2500HD, 3500, Suburban 1500, 2500, Avalanche 1500, 2500, Tahoe, GMC Yukon, Yukon XL 1500 and 2500 (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. They’re also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.

Product Features:
  • Allows a CURT trailer brake controller to be plugged into OEM socket
  • Quick plug harness installs with plug-and-play convenience
  • Wire colors match standard brake controller harnesses
  • Includes 24″ of 12 gauge wire for flexible installation
  • Slit-loom sleeve keeps wires contained and protected
See More

CURT – Trailer Brake Controller Harness (Part No.51451)

Trailer Brake Controller Harness

from

$14.29
A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle’s factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Cadillac Escalade, Escalade ESV, Chevy Silverado and GMC Sierra 1500, 1500 LD, 1500 Limited, 2500HD, 3500HD Suburban, Suburban 1500, Suburban 3500HD, Tahoe, Yukon and Yukon XL (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. They’re also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.

Product Features:
  • Allows a CURT trailer brake controller to be plugged into OEM socket
  • Quick plug harness installs with plug-and-play convenience
  • Wire colors match standard brake controller harnesses
  • Includes 24″ of 12 gauge wire for flexible installation
  • Slit-loom sleeve keeps wires contained and protected
See More

Cardone – Remanufactured ABS Control Module (Part No.N6010935628CAR)

Remanufactured ABS Control Module

from

$925.28
CARDONE Remanufactured ABS Control Modules are direct-fit O.E. replacements rebuilt from original cores. Every A1 CARDONE unit goes through stringent testing, ensuring a like-new performance, guaranteeing a quick reactionary time for when traction control is in need. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:
  • 100% computer testing ensures guaranteed, consistent performance
  • ABS mounting kit included for ease of installation
  • Field testing further ensures product reliability
  • Remanufactured with precision to the finest detail ensuring proper function
See More

Hopkins – 48035, 4 Flat Vehicle Side Towing Connector (48") (Part No.48035)

48035, 4 Flat Vehicle Side Towing Connector (48")

from

$7.99
Get your vehicle ready to tow the most common type of trailer on the road by installing this vehicle side 4 flat. This 4 flat connector carries the trailer’s basic lighting and includes printed wire functions that make installation quick.

Product Features:
  • 48 inch length
  • Corrosion Resistant Terminals
  • Most Commonly Used Trailer Connector
  • Found On Small Boat/Utility
  • Printed wire functions for easy wire reference
  • Printed Wire Functions For Easy Wire Reference
  • 100 Percent Tested
See More

CURT – Replacement USCAR Socket with 24in. Wires (Vehicle Side) (Part No.56229)

Replacement USCAR Socket with 24in. Wires (Vehicle Side)

from

$24.99
Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way USCAR replacement harness is designed to replace an existing USCAR plug and supply power for tail lights, turn signals, electric trailer brakes, a battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with color-coded wires and 24″ of bonded wire for easy splicing into your vehicle’s wiring system. This 7-way USCAR connector is a female-end socket, specifically designed for the vehicle side of the connection.

Product Features:
  • Replaces damaged or missing USCAR vehicle harness
  • Includes 24″ color-coded, bonded wires for easy installation
See More

Hopkins – 47685, CHEVROLET / GMC Trailer Brake Control Towing Connector (Universal) (Part No.47685)

47685, CHEVROLET / GMC Trailer Brake Control Towing Connector (Universal)

from

$15.99
Reduce your installation time to minutes! Many of today’s tow vehicles come with an O.E.M. connector or harness wires under the dash. The 47685 simply splices onto the tow vehicle tow package supplied wires and then plugs into the Hopkins brake control to complete the install.

Product Features:
  • Blunt cut wires allows for installation of any brake control
  • 36 inch wire length
  • For vehicles with a factory tow package
  • Includes Step-By-Step Instructions And Diagrams
See More

CURT – Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 30 Mins (Part No.14080)

Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 30 Mins

from

$269.99
Whatever the next item is on your to-do list — whether it’s arriving at the jobsite before dawn or getting your travel trailer set up in time to see the sunset — CURT class 4 trailer hitches offer greater towing power to let you Bring It. These custom receiver hitches are built to tackle bigger jobs and bolder adventures, all while giving you a custom fit for your vehicle. Class 4 hitches are available for a variety of makes and models, from pickup trucks and SUVs to full-size and commercial vans. This particular class 4 hitch fits certain years of the Cadillac Escalade, Chevy Avalanche, Suburban or Tahoe and GMC Yukon (to verify vehicle compatibility, see application info). It provides a weight carrying capacity of 10,000 lbs. GTW and 1,000 lbs. TW. It can also accept a weight distributing hitch, offering a maximum WD capacity of 12,000 lbs. and a WDTW of 1,200 lbs. CURT class 4 tow hitches are as much suited for work as they are for play. With their high load capacities, they are typically used for towing larger trailers, including everything from a double-axle utility trailer or livestock trailer to a full-length camper or large boat trailer (NOTE: Never exceed the lowest weight capacity of any towing component). All CURT class 4 receiver hitches come with a 2″ receiver tube opening and all the necessary hardware for a complete installation. From light-duty to heavy-duty, every CURT custom hitch is engineered to be vehicle-specific, using actual vehicles to create the optimal design. We then combine high-strength steel, precise welding and a co-cured finish of liquid A-coat and durable black powder coat to provide you with a hitch you can depend on. To prove it, we test all our hitches in accordance with SAE J684 for safety.

Product Features:
  • Rated to 10,000 lbs. gross trailer weight and 1,000 lbs. tongue weight
  • Compatible with weight distribution hitch (12,000 lbs. WD / 1,200 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Helping You Find the Right Towing Products for Your GMC Yukon XL 1500

You love your Yukon XL 1500. So we’ve made it easier than ever to help you find GMC Yukon XL 1500 Towing Products in our online catalog. Our inventory holds 75 aftermarket and OEM Towing Products for your GMC Yukon XL 1500, ranging from $5.99 to $1,971.99.

We offer parts from 13 brands trusted to make quality Towing Products for your GMC Yukon XL 1500. Before you buy, take some time to read through customer reviews. We currently have 3,934 reviews of GMC Yukon XL 1500 Towing Products from previous customers. Some of the top rated parts include 48035, 4 Flat Vehicle Side Towing Connector (48") with 3.6 stars and 47685, CHEVROLET / GMC Trailer Brake Control Towing Connector (Universal) with 5.0 stars.

Find your Yukon XL 1500 Towing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC Yukon XL 1500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Towing Products Brands for Your GMC Yukon XL 1500

Our inventory holds Towing Products for your GMC Yukon XL 1500 from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Hopkins, CURT, and GM Genuine, all of which can keep that GMC happy.
We have Dorman parts available for your GMC Yukon XL 1500 in categories like Trailer and Towing Accessories. Some of the top-rated Dorman parts in these categories are:
Trailer Hitch Electrical Connector Plug
from $33.99
(2)
Trailer Hitch Electrical Connector Plug
Towing Accessories

Top-Rated Hopkins Towing Products

Leading Hopkins Towing Products

We carry Hopkins brand parts for your GMC Yukon XL 1500 across several catalog categories, including Trailer Brake Control Parts and Trailer Wiring. Some of our most reviewed Hopkins parts include:
Premium Brake Controller with Smart LED Display
from $73.99
(20)
Premium Brake Controller with Smart LED Display
Trailer Brake Controls
40955, Multi-Tow® FORD / GM 7 Blade and 4 Flat Wiring Kit
from $39.99
(20)
40955, Multi-Tow® FORD / GM 7 Blade and 4 Flat Wiring Kit
Trailer Wiring Harness
47284, Reliance Plug-In Simple!® Trailer Brake Control
from $78.99
(19)
47284, Reliance Plug-In Simple!® Trailer Brake Control
Trailer Brake Controls

FAQs for GMC Yukon XL 1500 Towing Products

What are the most purchased Towing Products for the GMC Yukon XL 1500?

Out of 75 Towing Products for the GMC Yukon XL 1500, the most popular in our inventory are:
47297, InSIGHT Plug In Simple!® Trailer Brake Control
from $104.99
This product is not rated
47297, InSIGHT Plug In Simple!® Trailer Brake Control
Trailer Brake Controls
Trailer Brake Continue Relay Assembly
from $84.99
This product is not rated
Trailer Brake Continue Relay Assembly
Trailer Towing Relays

What are the top-rated GMC Yukon XL 1500 Towing Products?

Top-rated Towing Products for your GMC Yukon XL 1500 based on customer reviews/ratings are:
48035, 4 Flat Vehicle Side Towing Connector (48")
from $7.99
(5)
48035, 4 Flat Vehicle Side Towing Connector (48")
“Great fit”
Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 30 Mins
from $358.99
(2)
Trailer Hitch: 2" Receiver, 10,000 LB Capacity, Installs as low as 30 Mins
“This is the big, heavy duty hitch. It was exactly as advertised; FAST ship; a perfect fit and easy install. GREAT price, too!”