GMC Sprint Air Intakes

Edelbrock part #2040 Manifold Installation kit will simplify the process of adding more power and efficiency to your street rod or muscle car. It combines all the necessary components to replace your stock iron intake manifold with an Edelbrock aluminum i

Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.

Product Features:

• Manufactured from high quality materials for a long service life
• Torque values listed on parts (where applicable)
• Easy to install
• Constructed to strict engineering quality standards

Product Features:

• Customize Carburetor Calibration and Performance
• Owners Manual has Assembly Help
• Includes Metering Rod Retaining Spring
• Includes Metering Rods
• Includes Metering Jets
• Includes Step-Up Springs

The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:

• Application matched components ensure carburetor can be returned to like new condition.

The Edelbrock #12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock #12371 fits Holley 4160 carburetors.

Product Features:

• Nitrile Rubber Material
• Metering Block Type
• Set of 4
• Fits Holley® 4160 Carburetors
• Made In The USA

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Stamped from 18 gauge steel. Triple-chrome plated. High quality finish. Great looks. Works with all 5.152 inch carburetors. Base knock-outs for use with crankcase ventilation.

Product Features:

• Stamped From 18-Gauge Steel
• Triple-Chrome Plated
• High-Quality Finish
• Great Looks
• Works With All 5.125 in. Carbs
• Base Knock-Outs For Use w/Crankcase Ventilation

Edelbrock part #27033 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr

Product Features:

• Idle-5500 RPM Range
• Dual Plane Type-4150 Style Flange
• 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
• Black Powder Coated Finish
• Non-EGR W/ Oil Fill Tube

Product Features:

• The Edelbrock #12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 Carburetors.
• Kit includes two black nitrile fuel bowl gaskets.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Finish your custom engine job with these show quality grade 5 chromed 12-point bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1 inch bolts with (12) 3/8 inch AN washers.

Product Features:

• Chrome plated
• Grade 8
• 12-point head
• AN washers with no exposed shoulder for a professional appearance

Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:

• Nominally Rated At 170,000 PSI Tensile Strength
• Precision Machined Threads For Secure Engagement, And Wont Rust
• Wide Under Head Flange And Companion Washers Provide Even Load Distribution
• Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
• Facilitates Optimum Sealing Of Gasket Surfaces

The Edelbrock part #1033 Progressive Linkage Kit is designed to smooth throttle response, eliminate flat spots and improve fuel economy. It achieves this by only opening the center carburetor at less than 50% (or 33%) pedal travel thus sharpening the vent

Product Features:

• Steel Material
• Zinc Plated
• Adjustable
• 3-Barrel Configuration
• Made In The USA

The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.

Product Features:

• Vibrant Polished Alum Good Looks/Weight Savings/Lasting Shine
• Performance Upgrade For Stock To Mildly Modified Vehicles
• Universal Calibration For Easy Bolt-On Performance
• Factory Preset Electric Choke For Easy Startups
• For All Weights/Gearing/Trans For Smooth Open Of Secondaries
• Single Feed Fuel Inlet For Easy Installation
• Power Valve Blow-Out Protection
• 100% Wet Flow Tested By Holley Technicians

Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!

Product Features:

• Aluminum Construction
• Saves 4.5 Pounds 38% Weight Savings
• Has A Set Screw In The Base Plate For Wide Open Throttle Stop
• Throttle Shafts Rides In Oil Smooth Throttle Actuation
• Metering Blocks/True Gasket Sealing/Fully Adjustable
• Contoured Venturi Inlet Balances Airflow For Increased hp
• Air Bleeds Moved Outward Allow Smoother Transition Of Airflow
• Metering Blocks Feature Durability True Gasket Sealing
• Idle Bypass Valve Eliminates Need For Holes In Throttle Plates
• Dual 30CC Accelerator Pumps Fuel From Idle To Full Throttle
• Fuel Bowls Provide 20% More Fuel Capacity Controls Slosh
• Clear Sight Windows For Easy/Safe Fuel Level Adjustments

The Edelbrock 94 Carburetor power valve block off #12624 is a great way to fine tune your vintage series carburetor. These Edelbrock Power valve Block Off’s will fit Edelbrock Vintage Series 94 carburetors as well as original Holley 94’s and its later var

Product Features:

• Fits Any Demon®, Holley®, And Quick Fuel® Carburetors
• Includes Gasket
• 1/2 in. x 28 Power Valve Thread
• For Applications That Prefer To Run Carbs Without The Power Valves
• Made In The USA

The Edelbrock #12625 Single Stage 2.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation

Product Features:

• Gasket Or Seal Included
• 2.5 in. Hg Opening Vacuum
• Single Stage
• Standard Flow Type
• Made In The USA

Product Features:

• Clean Positive Seal
• Embossed Silicone Bead Surrounding The Port
• Matched To Manifolds And Cylinder Heads

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
• ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
• REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.

Product Features:

• Made From Cellulose/nitrile Composition Material
• Provides Excellent Sealing And Durability
• Can Be Trimmed If Necessary For Modified Port App

Any gasket can create a seal, but a good gasket can do it with reduced clamping force and for a long period of time. Edelbrock gaskets are manufactured from extremely high-quality materials and are specifically designed to fit Edelbrock intakes and cylinder heads, so there’s no chance that they will interfere with component operation.

Product Features:

• 10-Pack of 7201 Intake Gasket Sets