GMC Sierra 3500 Turbochargers

The turbocharger compressor wheel plays an important role in delivering high-pressure air to the intake manifold, resulting in more power. Traditional compressor wheels are made from cast aluminum which results in higher mass and lower fatigue life when compared to the lighter weight, stronger, CARDONE Billet compressor wheel. These billet wheels are well suited for high demand applications including high performance racing applications or high duty cycle applications such as buses or delivery vehicles. CARDONE Billet Compressor Wheels are designed to meet or exceed all O.E. performance standards and fit seamlessly into O.E. covers. Built for strength and tested for endurance, CARDONE Billet Compressor Wheels provide peace of mind for severe-duty demands.

Product Features:

• Product designed and manufactured to accommodate O.E. applications
• Fits into O.E. cover, no modifications needed
• Meets or exceeds O.E. performance
• All products are tested and inspected in an ISO-9001 compliant environment
• Machined from forged billet for strength
• Milled for consistent mass and consistent center of gravity
• Machined with a high degree of precision
• Stronger than OE cast aluminum wheels resulting in higher fatigue life

Optimize your 01-04 LB7 GM diesel’s airflow to improve throttle response with aFe’s ATLAS 3″ turbo down-pipe. Constructed from 3″ mandrel bent steel tubing for maximum flow, the larger tube diameter and smooth transition bends allow increased airflow between your OE turbo and exhaust to reduce EGT’s for quicker turbo spool times. The CNC machined heavy duty inlet flange with turbine gasket and V-band outlet flange ensure an OE-style, 360 degree sealing surface. Coated with a black finish, the ATLAS turbo down-pipe is wrapped with thermal header tape to reduce EGT’s for improved performance and durability. Flow and Performance: The ATLAS turbo down-pipe is made from 3″ mandrel bent steel tubing offering smoother transition bends for low turbulence to deliver quicker throttle response. Perfect Fit: The ATLAS turbo down-pipe is an upgrade to the OE down-pipe and utilizes the factory mounting locations for true bolt-on performance. Finish: This down pipe is coated with a black finish and wrapped in thermal header tape for better insulation. This reduces EGT’s and under hood temperatures. Note: This system is not currently CARB exempt or available for sale in California, and cannot be used on any vehicle registered with the California Department of Motor Vehicle. This item in not legal in NY for use on vehicles with CA emissions.

Product Features:

• Mandrel Bent Black Finished Steel For Long Lasting Good Looks
• Replaces OE Down-Pipe For True Bolt-On Performance
• Wrapped in High Temp Thermal Tape For Insulation
• CNC Machined V-Band Inlet/Outlet Flange

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Validated for fit, form, and function
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust

Turbocharger Kit

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Validated for fit, form, and function
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

This turbocharger unison ring is designed to match the fit and function of the original ring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this turbocharger unison ring is designed to match the fit and function of the original ring on specified vehicles.
• Restores functionality – reliable replacement for an original part that has failed due to corrosion and wear.
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Product Features:

• All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
• Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
• All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
• 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
• Each unit comes with a pre-lube syringe to ensure product protection during installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Meets or exceeds O.E. performance.
• Comes with a pre-lube syringe to ensure product protection during installation.

Product Features:

• All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
• Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
• All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
• 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
• Each unit comes with a pre-lube syringe to ensure product protection during installation.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Meets or exceeds O.E. performance.
• Comes with a pre-lube syringe to ensure product protection during installation.

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Validated for fit, form, and function
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust

Turbocharger Vane Position Sensor

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

This turbocharger vane position sensor matches the function of the original equipment sensor to restore the engine management system’s ability to determine the position of the vanes on a variable geometry turbocharger.

Product Features:

• Ideal replacement – this sensor restores the engine management system’s ability to determine the position of the vanes on a variable geometry turbocharger.
• Easy to install – no special tools are required to install this vane position sensor.
• Cost-effective solution – offers original equipment quality at competitive price
• Quality tested – this part has undergone vehicle and inspection testing to ensure reliable performance

When a turbocharger cartridge fails, the only original equipment solution is to replace the entire turbocharger. This Dorman OE FIX replacement enables direct replacement of the cartridge without paying for an entire new turbocharger.

Product Features:

• Turbocharger Cartridge.
• Turbocharger Cartridge.
• When a turbocharger cartridge fails, the only original equipment solution is to replace the entire turbocharger. This Dorman OE FIX replacement enables direct replacement of the cartridge without paying for an entire new turbocharger.
• Direct replacement – this turbocharger cartridge is made to replace the original equipment cartridge on specific vehicles
• Cost-effective solution – allows repair of only the failed cartridge without needing to replace entire turbocharger

When turbochargers fail, the common response is the replacement of the entire unit. However, the damage is often isolated within the turbo cartridge, which contains the core components of the turbo assembly. By replacing just the cartridge, the remaining components can be salvaged and repair times reduced. CARDONE cartridges are assembled with O.E.-grade components to ensure high performance and durability.

Product Features:

• Eliminates the need to replace the entire turbocharger
• Allows for reuse of the original compressor and turbine housings
• Direct O.E. replacement
• Allows for replacement of turbocharger without the need for balancing
• Supplied with O.E.-grade components for durability

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Validated for fit, form, and function
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Validated for fit, form, and function
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust

The aFe Bladerunner Turbo Inlet Manifold increases performance to your Duramax by 23hp and 57lbs x ft. torque while increasing air flow 73-percent over the factory turbo inlet. The Bladerunner turbo inlet manifold also improves turbo spool up times and lowers exhaust gas temperature (EGTs). This unit is constructed out of durable A356-T6 aluminum and uses the patented multi-direction vane (MDV) technology to help guide air through the manifold to your turbo. This kit comes complete with turbo inlet manifold and all hardware needed for an easy installation.

Product Features:

• Reduces Restriction
• Improves MPG
• Lower EGTs
• 73% cfm Flow Increase

The aFe Bladerunner Turbo Inlet Manifold increases performance to your Duramax by 9hp and 23lbs x ft. torque. The Bladerunner turbo inlet manifold also improves turbo spool up times and lowers exhaust gas temperature (EGTs). This unit is constructed out of durable A356-T6 aluminum and uses the patented multi-direction vane (MDV) technology to help guide air through the manifold to your turbo. This kit come complete with turbo inlet manifold, inlet adapter with coupling, CCV tube adapter with coupling and all hardware needed for an easy installation.

Product Features:

• MDV Technology For Maximum Flow
• Cast A356-T6 Aluminum Const.
• 5 Port Pads For Gauges And Other Accessories
• Improves HP/Torque/Boost Pressure/Turbo Spool