GMC Sierra 3500 HD Engine Timing Parts

ACDelco GM Original Equipment Camshaft Phasers adjust camshaft positioning while your vehicle’s engine is running, and are GM-recommended replacements for your vehicle’s original components. They help ensure the camshaft rotates in the correct timing with other valve train components to provide optimal engine performance, and work with your vehicle’s variable valve timing solenoid to help maximize drive quality and fuel economy. These original equipment phasers have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

National . from National

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Since 1921, Cloyes has been the trusted leader in automotive timing systems. As a critical component of the engine’s timing system, the crankshaft sprockets work in unison with the timing chain, tensioners, guides and other sprockets, to ensure precise timing. Cloyes engine timing crankshaft sprockets are precision-tooled with exact tooth geometry and a perfectly matched bore, off-set and timing index for superior fit, reliability, and long-term performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading Warranty (limited) and technical support. 

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

“Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″” Roller Diameter “”Z”” Chain for Reduced Friction. “”Z”” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “”Z”” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

INA timing chain kits include all essential components to ensure that the repair is done right the first time. Each kit contains all necessary chains, tensioners, and guides. In certain applications the kit also contains the necessary gears and sprockets, along with a specially formulated, high performance, chain additive uniquely made for Schaeffler by Liqui Moly. The chain additive helps reduce friction during the break in period and reduces run-in wear by up to twenty percent.

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading Warranty (limited) and technical support.

INA timing chain kits include all essential components to ensure that the repair is done right the first time. Each kit contains all necessary chains, tensioners, and guides. In certain applications the kit also contains the necessary gears and sprockets, along with a specially formulated, high performance, chain additive uniquely made for Schaeffler by Liqui Moly. The chain additive helps reduce friction during the break in period and reduces run-in wear by up to twenty percent.

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading Warranty (limited) and technical support.

ACDelco GM Original Equipment Engine Timing Damper Kits remove unnecessary slack from the timing chain to help prevent chain rattle and excessive component wear, and are GM-recommended replacements for your vehicle’s original components. These original equipment engine timing damper kits contain components that will provide the same performance, durability, and service life you expect from General Motors.

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading Warranty (limited) and technical support.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

GM Genuine Parts Engine Variable Valve Timing Solenoids are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

“High Performance 3/8″” Pitch Single Roller Replacement TRUE Roller Chain. 0.250″” Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.”

ACDelco GM Original Equipment Engine Timing Chains synchronize the rotation of the crankshaft and camshaft(s) in an internal combustion engine. They help ensure that the engine’s valves open and close at the proper time during each cylinder’s intake and exhaust strokes, and are GM-recommended replacements for your vehicle’s original components. These original equipment timing chains have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit €” delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.

“High Performance 3/8″” Pitch Single Roller Replacement TRUE Roller “”Z Chain”” Chain. 0.250″” Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.”

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.