GMC Sierra 3500 HD Drivetrains

Essential GMC Sierra 3500 HD Drivetrains

Yukon Gear – Standard Open Cross Pin Bolt Lock Ring For 11.5" GM (Part No.33408)

Standard Open Cross Pin Bolt Lock Ring For 11.5" GM

from

$16.99
Standard Open cross pin bolt lock ring for 11.5″ GM.

Product Features:
  • Cross pin bolt lock ring
  • Fits GM 11.5″
See More

Yukon Gear – Adjuster Lock Bolt For Left Hand Case Half Of 7.2" And 9.25" GM IFS (Part No.33244)

Adjuster Lock Bolt For Left Hand Case Half Of 7.2" And 9.25" GM IFS

from

$32.99
Adjuster lock bolt for left hand case half of 7.2″ and 9.25″ GM IFS.

Product Features:
  • Side adjuster lock bolt
  • Fits GM 7.2″ IFS and 9.25″ IFS
See More

Cardone – Transfer Case Motor (Part No.48-121)

Transfer Case Motor

from

$275.99
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

Product Features:
  • All motors are 100% torque tested to ensure strength for proper gear engagement.
  • Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
  • Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
  • Motor magnets are 100% recharged for superior performance and reliability.
  • Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
See More

Yukon Gear – 1541H Right Hand Long Side Stub Axle For ’97-’00 GM 9.25" IFS (Part No.21621)

1541H Right Hand Long Side Stub Axle For '97-'00 GM 9.25" IFS

from

$634.99
Yukon 1541H right hand long side stub axle for ’97-’00 GM 9.25″ IFS. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.

Product Features:
  • 33 spline
  • 14 3/8″ long
  • Fits GM 9.25″ IFS in 1997-2000
See More

Yukon Gear – Left Hand Carrier Bearing Adjuster For 9.25" GM IFS (Part No.33362)

Left Hand Carrier Bearing Adjuster For 9.25" GM IFS

from

$98.99
Left hand carrier bearing adjuster for 9.25″ GM IFS.

Product Features:
  • Side adjuster
  • Fits 2010 and down GM 9.25″ IFS
  • Left hand side
See More

National – Bearings (Part No.M802011)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Shaft Repair Sleeve (Part No.99210)

Shaft Repair Sleeve

from

$47.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

GM Genuine Parts – Front Wheel Bearing Seal (O-Ring) (Part No.290-303)

Front Wheel Bearing Seal (O-Ring)

from

$4.99
GM Genuine Parts Engine Coolant Outlet O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Differential Bearing (Part No.J7060366581ACD)

Differential Bearing

from

$137.90
Differential Bearing

MOOG Driveline Products – Universal Joint Strap Kit (Part No.492-10)

Universal Joint Strap Kit

from

$15.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 330, 330A, 331 & 331A
  • Contains two 1.66″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
See More

Yukon Gear – Bearing Race Driver (Part No.56015)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM88610 race
  • All steel construction
See More

Yukon Gear – Grizzly Locker For GM & Chrysler 11.5" With 30 Spline Axles (Part No.28013)

Grizzly Locker For GM & Chrysler 11.5" With 30 Spline Axles

from

$1749.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:
  • Fits GM and Chrysler 11.5″ with 30 spline axles
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Yukon Gear – Long Shaft Inner Clip For 9.25" GM IFS (Part No.33371)

Long Shaft Inner Clip For 9.25" GM IFS

from

$28.99
Long shaft inner clip for 9.25″ GM IFS.

Product Features:
  • Stub axle snap ring
  • Fits GM 9.25″ IFS
See More

Driveworks – Clutch Release Bearing (Part No.S-B-2610)

Clutch Release Bearing

from

$15.99
Product Features:
  • Brand may vary by location
See More

Dorman – Remanufactured Transfer Case Control Module (Part No.599-192)

Remanufactured Transfer Case Control Module

from

$172.99
Transfer case control module no longer in control? Restore it cost-effectively with this replacement module that provides the same function and performance of the original on specific vehicles.

Product Features:
  • Direct replacement – this transfer case control module directly replaces the original equipment modules on certain vehicle years, makes and models
  • Effective fix – replacement restores transfer case motor control and addresses trouble codes
  • Thoroughly tested – each module undergoes rigorous testing to ensure reliable performance
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Dorman – Axle Flange Gasket Kit (Part No.926-573)

Axle Flange Gasket Kit

from

$17.49
Ensure a leak-free repair when servicing axle bearings or parking brake shoes. This axle shaft flange seal is a direct replacement for the original gasket and should be replaced every time work is performed at the axle flange.

Product Features:
  • Ideal replacement – this axle shaft flange seal directly replaces the original gasket without having to visit the dealer
  • Required for routine service – this gasket should be replaced every time work is performed at the axle flange
  • Durable construction – this axle shaft flange gasket is made of tough, durable materials for leak-free performance
  • Quality tested – this flange gasket has been designed and tested for a guaranteed fit
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For GM 11.5" In A 4.11 Ratio (Part No.24442)

High Performance Ring & Pinion Gear Set For GM 11.5" In A 4.11 Ratio

from

$844.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits GM and Chrysler 11.5″
  • 11.50″ ring gear diameter
  • 30 spline pinion
  • 12 ring gear bolts
  • 4.11 ratio
See More

Dorman – Spindle Nut Key (Part No.615-140.1)

Spindle Nut Key

from

$15.29
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – 1541H Alloy Front Left Hand Short Side Stub Axle For GM 9.25" IFS (’88-Newer) See Notes (Part No.21590)

1541H Alloy Front Left Hand Short Side Stub Axle For GM 9.25" IFS ('88-Newer) See Notes

from

$279.99
Yukon front lefft hand short side stub axle for GM 9.25″ IFS (’88 and newer). Yukon front axles come with a one year warranty against manufacturing defects.

Product Features:
  • Fits 1988 and up GM 9.25″ IFS
  • Left hand side
  • 33 spline
See More

Pro-King – Differential Internal Nest Kit (Part No.744A717)

Differential Internal Nest Kit

from

$323.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Felpro – TRANSFER CASE GASKET SET (Part No.72770)

TRANSFER CASE GASKET SET

from

$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Driveworks – Needle Bearing (Part No.S-B-2110)

Needle Bearing

from

$7.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

GMC Sierra 3500 HD Drivetrains Categories

Helping You Find the Right Drivetrains for Your GMC Sierra 3500 HD

You love your Sierra 3500 HD. So we’ve made it easier than ever to help you find GMC Sierra 3500 HD Drivetrains in our online catalog. Our inventory holds 424 aftermarket and OEM Drivetrains for your GMC Sierra 3500 HD, ranging from $1.89 to $2,514.99.

We offer parts from 27 brands trusted to make quality Drivetrains for your GMC Sierra 3500 HD. Before you buy, take some time to read through customer reviews. We currently have 132,074 reviews of GMC Sierra 3500 HD Drivetrains from previous customers. Some of the top rated parts include Universal Joint with 4.6 stars and CV Axle Shaft Assembly with 3.9 stars.

Find your Sierra 3500 HD Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC Sierra 3500 HD part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Drivetrains Brands for Your GMC Sierra 3500 HD

Our inventory holds Drivetrains for your GMC Sierra 3500 HD from 27 trusted brands. You’ll find OEM and aftermarket parts from brands like Moog, Valvoline, and Felpro, all of which can keep that GMC happy.

FAQs for GMC Sierra 3500 HD Drivetrains

What are the most purchased Drivetrains for the GMC Sierra 3500 HD?

Out of 424 Drivetrains for the GMC Sierra 3500 HD, the most popular in our inventory are:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Housing Cover Gaskets
Greaseable Premium Universal Joint
from $26.99
(89)
Greaseable Premium Universal Joint
U-Joints
Greaseable Super Strength Universal Joint
from $55.99
(39)
Greaseable Super Strength Universal Joint
U-Joints

What are the top-rated GMC Sierra 3500 HD Drivetrains?

Top-rated Drivetrains for your GMC Sierra 3500 HD based on customer reviews/ratings are:
Universal Joint
from $15.99
(52)
Universal Joint
“Great product.. Nice easy install”
CV Axle Shaft Assembly
from $134.99
(49)
CV Axle Shaft Assembly
“Fast and knowledgeable”
Greaseable Super Strength Universal Joint
from $34.99
(48)
Greaseable Super Strength Universal Joint
“Moog and advanced auto got me out of a bad situation with an amazing part ( u”