GMC Savana 1500 Wheels and Tires

Essential GMC Savana 1500 Wheels and Tires

Schrader – Direct Fit Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.21507)

Direct Fit Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece

from

$40.99
Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.

Product Features:
  • DIRECT REPLACEMENT: 1 for 1 replacement sensor
  • QUICK AND EASY: TPMS sensors are ready out of the box
  • VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
  • SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
  • RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Dorman – Wheel Center Hub Cap (Part No.909-001)

Wheel Center Hub Cap

from

$78.99
This wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles.
  • Restores functionality – reliable replacement for an original cap that is missing or damaged due to collision.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – 17 x 7.5 In. Steel Wheel (Part No.939-186)

17 x 7.5 In. Steel Wheel

from

$141.99
Damaged your wheel, or looking to upgrade? This wheel is specifically designed to directly replace the original wheel on certain vehicle applications. It is thoroughly tested to meet safety standards for reliable performance.

Product Features:
  • Direct replacement – this wheel is designed to match the fit and structural appearance of the original wheel on specific vehicle years, makes and models.
  • Cost-effective solution – offers original equipment quality and appearance for a competitive price.
  • Thoroughly tested – dynamic radial testing, radial run-out testing, and axial run-out testing ensures performance
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Autel – MX-Sensor 1-Sensor Bulk Box 240 (Part No.300050)

MX-Sensor 1-Sensor Bulk Box 240

from

$7321.99
The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:
  • Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
  • Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
  • Combined Frequency 315MHz and 433MHz
  • Programmable with Autel TPMS Service Tools
  • Program to Replace 99% of OE Sensors
  • Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
  • Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
  • Maximum Signal Strength / Battery Reliability
  • Maximum Signal Strength, Battery Reliability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-RP513067)

Wheel Bearing: Direct Fit, 1 Piece

from

$37.49
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:
  • Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
  • Engineered, manufactured, and tested to meet or exceed OE specifications
  • Integrated seal design improves contamination resistance for a longer bearing life
  • High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
  • Manufactured from high quality steel to maximize durability under even the harshest driving conditions
  • Brand may vary by location
See More

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, 20 Piece (Part No.VS-925A)

Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, 20 Piece

from

$8.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:
  • TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
  • 0.453″ rim hole compatiblity
  • 200 PSI maximum cold inflation pressure
See More

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Black Anodized Valve Stem (Part No.VS925B)

Clamp-In TPMS Service Kit: Metal, 0.453 Inch Black Anodized Valve Stem

from

$9.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:
  • Black anodized clamp-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
  • 0.453″ rim hole compatibility
  • 200 PSI maximum cold inflation pressure
See More

McGard – Black SplineDrive 6 Lug Wheel Installation Kit (M14 x 1.5 Thread Size) (Part No.65610BK)

Black SplineDrive 6 Lug Wheel Installation Kit (M14 x 1.5 Thread Size)

from

$249.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Set of 20 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
See More

Dorman – M14-1.50 Serrated Wheel Stud – 16.01mm Knurl, 57.93mm Length (Sold by each) (Part No.610-434)

M14-1.50 Serrated Wheel Stud - 16.01mm Knurl, 57.93mm Length (Sold by each)

from

$2.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:
  • Durable material – carbon steel meets SAE automotive industry standards for strength and hardness.
  • Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
  • Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Dorman – Brake Dust Shield – 1 Pair (Part No.924-221)

Brake Dust Shield - 1 Pair

from

$46.49
Protect the braking system from debris and corrosive weather conditions with this rust-resistant replacement brake dust shield. Dimensional verification and salt spray testing ensures proper fit and extended service life.

Product Features:
  • Effective replacement – designed to match the fit and function of the stock brake dust shield on specific vehicle applications.
  • Longer service life – corrosion-resistant steel construction protects brakes from elements and debris.
  • Ideal fix – directly replaces highly deterioration-prone original part
  • Precision-engineered – has undergone dimensional verification and salt spray testing to ensure quality
See More

Dorman – Wheel Nut Chrome Standard M14-1.50 (Part No.711-834)

Wheel Nut Chrome Standard M14-1.50

from

$8.99
Our Wheel Lug Nuts are designed and constructed to strict engineering quality standards. All of or Wheel Lug Nuts are manufactured with high corrosion resistance to combat rust in any environment.

Product Features:
  • Wheel Nut Chrome Standard M14-1.50, Hex 21mm, Length 16.36mm
  • Wheel Nut Chrome Standard M14-1.50
  • Our Wheel Lug Nuts are designed and constructed to strict engineering quality standards. All of or Wheel Lug Nuts are manufactured with high corrosion resistance to combat rust in any environment.
  • Direct replacement for a proper fit every time
  • Available in different quantities and packaging options
See More

Autopart International Inc – Wheel Hub Assembly (Part No.K70012060608API)

Wheel Hub Assembly

from

$129.02
Wheel Hub Assembly

Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)

TPMS Ni Plated Valve Core, 100 Pack

from

$23.99
Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:
  • DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
  • DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
  • SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
  • VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
  • PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Flattop Capped, 1.752" Length, Chrome (Sold by each) (Part No.611-236)

Wheel Lug Nut: M14-1.50 Thread, Conical 60, Flattop Capped, 1.752" Length, Chrome (Sold by each)

from

$4.99
The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There’s often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.

Product Features:
  • Improved design – direct replacement, one-piece lug nut design, vs. two-piece factory design that often leads to premature failure of the wheel nut
  • Corrosion resistant – by removing the veneer of the OEM lug nut design there’s no chance of moisture and rust causing it to bulge and deform
  • Thoroughly tested – part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

ACDelco – GM Original Equipment Axle Shaft Seal (Part No.K4021232396ACD)

GM Original Equipment Axle Shaft Seal

from

$23.38
ACDelco GM Original Equipment Axle Shaft Seals are high quality radial shaft seals, which seal in lubricant and keep dirt and water out, and are GM-recommended replacements for your vehicle’s original components. Made from rubber or plastic composite materials, this axle shaft seal conforms to the rotating sealing surface to provide leak-free operation. These original equipment axle shaft seals have been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Get the GM quality you know and trust with ACDelco GM Original Equipment Bearings and Oil Seals. Stay with the brand of parts your vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Bearings and Oil Seals are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle. ACDelco offers a variety of bearings and seals for your GM vehicle, such as wheel hub bearings, generator/alternator bearings, front and rear wheel seals, rear axle seals, etc. When smooth, efficient performance is critical, choose ACDelco.

Product Features:
  • High quality materials ensure long service life
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)

Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers

from

$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:
  • MX-Sensor Components
  • 4 Metal Valves
  • 4 Rubber Valves
  • Rubber Gasket (2×10 pcs)
  • Screw Nut (2×10 pcs)
  • Washer (2×10 pcs)
  • Metal Valve Cap (2X10 pcs)
  • Rubber Valve Cap (2X10 pcs)
  • Valve Core (2X10 pcs)
See More

Dorman – Hub And Bearing Mounting Bolts (Part No.917-517)

Hub And Bearing Mounting Bolts

from

$29.99
Wheel hub bolts rounded off or have damaged threads? These wheel hub bolts are designed to match the performance of original equipment bolts to secure the hub to the knuckle/spindle on specified vehicles.

Product Features:
  • Direct replacement – these wheel hub bolts are designed to match the performance of the original bolts on specified vehicles.
  • Ideal solution – made of durable materials to reliably replace bolts with rounded-off or damaged threads.
  • Application-specific – precision-manufactured to securely mount the hub to the vehicle knuckle/spindle
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Schrader – TPMS Sensor Service Kit (Part No.20018)

TPMS Sensor Service Kit

from

$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:
  • DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
  • DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
  • SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
  • VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
  • PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Dorman – Wheel Lug Nut Cover: M27-2.0 Thread, 22 mm Hex, 35.5 mm Depth, Plastic, Black (Sold by each) (Part No.611-623)

Wheel Lug Nut Cover: M27-2.0 Thread, 22 mm Hex, 35.5 mm Depth, Plastic, Black (Sold by each)

from

$2.49
This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.

Product Features:
  • Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance.
  • Quality materials – manufactured for durability and a quality finish
  • Simple installation – no special tools required
  • Quality tested – this part has undergone dimensional testing to ensure a quality fit
See More

Dorman – Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Duplex Acorn, 2.05" L, Chrome, 4 Locks/1 Key (Part No.711-624)

Wheel Lug Nut Lock Set: M14-1.50 Thread, Conical 60, Duplex Acorn, 2.05" L, Chrome, 4 Locks/1 Key

from

$19.29
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts.
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Keyless Entry Module Connector (Part No.PTC2161)

Keyless Entry Module Connector

from

$99.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

National – Multi Purpose Seal (Part No.4739)

Multi Purpose Seal

from

$4.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Driveworks – Oil Seal (Part No.S-4739)

Oil Seal

from

$2.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

COAST TO COAST – 17", 6 Spokes, Snap-On/Center Retention, Plated, Chrome, Abs Plastic, Set Of 4 (Part No.IWCIMP358X)

17", 6 Spokes, Snap-On/Center Retention, Plated, Chrome, Abs Plastic, Set Of 4

from

$112.99
Quickly and easily change the trim level appearance of your car, pickup truck or SUV with Impostor(R) wheel skins from Coast to Coast International. Each Impostor(R) wheel skin is designed and manufactured from automotive grade ABS to fit securely over the OE wheel. Installation in simple and secure. Pair them with CCI Grille Overlays and Door Handle or Mirror Covers for a complete package look. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Wheel Skins. Add Handles And Mirror Covers (Sold Separately) For A Factory-Style Package
  • Wheel Skins Are Year-Make-Model Specific And Available In Different Finishes
  • FIT SECURELY OVER THE ORIGINAL WHEEL, Fits Like A Glove Over Existing Wheels And Stay Securely Attached Using A Patented Retention System So You Can Be Confident That They Wont Fall Off While Driving
  • UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
  • COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
  • EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
See More

Helping You Find the Right Wheels and Tires for Your GMC Savana 1500

You love your Savana 1500. So we’ve made it easier than ever to help you find GMC Savana 1500 Wheels and Tires in our online catalog. Our inventory holds 186 aftermarket and OEM Wheels and Tires for your GMC Savana 1500, ranging from $1.99 to $7,321.99.

We offer parts from 24 brands trusted to make quality Wheels and Tires for your GMC Savana 1500. Before you buy, take some time to read through customer reviews. We currently have 54,390 reviews of GMC Savana 1500 Wheels and Tires from previous customers. Some of the top rated parts include Hub and Bearing Assembly with 4.6 stars and Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece with 3.3 stars.

Find your Savana 1500 Wheels and Tires here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC Savana 1500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Wheels and Tires Brands for Your GMC Savana 1500

Our inventory holds Wheels and Tires for your GMC Savana 1500 from 24 trusted brands. You’ll find OEM and aftermarket parts from brands like Dorman, Driveworks, and Autel, all of which can keep that GMC happy.
We have Xtra Seal parts available for your GMC Savana 1500 in categories like TPMS Sensors. Some of the top-rated Xtra Seal parts in these categories are:
TPMS Snap-In Valve for Continental Sensors
from $5.29
(2)
TPMS Snap-In Valve for Continental Sensors
Tire Pressure Sensor Valves

FAQs for GMC Savana 1500 Wheels and Tires

What are the most purchased Wheels and Tires for the GMC Savana 1500?

Out of 186 Wheels and Tires for the GMC Savana 1500, the most popular in our inventory are:
MX-Sensor 1-Sensor (Rubber)
from $41.99
This product is not rated
MX-Sensor 1-Sensor (Rubber)
Tire Pressure Sensors

What are the top-rated GMC Savana 1500 Wheels and Tires?

Top-rated Wheels and Tires for your GMC Savana 1500 based on customer reviews/ratings are:
Hub and Bearing Assembly
from $182.99
(264)
Hub and Bearing Assembly
“Great quality”
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
from $41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
“Was everything I expected”
Hub and Bearing Assembly
from $206.99
(61)
Hub and Bearing Assembly
“Great Product!!!”