GMC PM253 Fuel and Emissions Systems

Essential GMC PM253 Fuel and Emissions Systems

ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)

For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers

from

$12.29
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Properly Aligned
  • Conventional Hex Heads
  • Rust-Proof Stainless Bolts
  • 170,000 PSI
See More

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Fuel Pump Mounting Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)

Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block

from

$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X

Product Features:
  • Black AnodizedFinish
  • High Capacity Fuel Rails
  • For Use W/ Pro-Flo XT Manifold #7137
  • -6 AN Inlet / Outlet
  • Made In The USA
See More

Carquest Premium – Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10491)

Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Cap: 10623, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10623)

Fuel Cap: 10623, Push In, Direct Fit, Provides Tight Seal, 1 Pack

from

$12.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

ARP Auto Racing – Chrome Moly (Part No.134-8701)

Chrome Moly

from

$22.79
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:
  • Made From Premium Grade Aerospace Chrome Moly
  • Center Less Ground To Precise Diameter
  • Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
  • Provide With Required Reliability And Improved Performance
See More

Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)

EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706

from

$83.99


Product Features:
  • EGR Adapter
  • Clears OEM Intake
  • Includes Gaskets and Bolts
See More

Mr. Gasket – Electric Fuel Pump (Part No.12S)

Electric Fuel Pump

from

$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Product Features:
  • Solid-state Worry Free Electronics
  • Internal Pressure Regulating
  • Universal Design Allows For Easy Installation
  • No DiaphraGMs Or Mechanical Parts To Wear Out
  • They Make An Excellent Fuel Transfer or Booster Pump
  • Not designed for use on aircraft of any type.
  • Hose Barbs Fit 5/16″ Fuel Hose
  • Self-priming, 2 wire design
  • Eliminates vapor lock and flooding
See More

Helping You Find the Right Fuel and Emissions Systems for Your GMC PM253

You love your PM253. So we’ve made it easier than ever to help you find GMC PM253 Fuel and Emissions Systems in our online catalog. Our inventory holds 8 aftermarket and OEM Fuel and Emissions Systems for your GMC PM253, ranging from $2.99 to $211.99.

We offer parts from 5 brands trusted to make quality Fuel and Emissions Systems for your GMC PM253. Before you buy, take some time to read through customer reviews. We currently have 269 reviews of GMC PM253 Fuel and Emissions Systems from previous customers.

Find your PM253 Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC PM253 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Fuel and Emissions Systems Brands for Your GMC PM253

Our inventory holds Fuel and Emissions Systems for your GMC PM253 from 5 trusted brands. You’ll find OEM and aftermarket parts from brands like Felpro, Carquest Premium, and Mr. Gasket, all of which can keep that GMC happy.
We have Felpro parts available for your GMC PM253 in categories like Fuel Pumps. Some of the top-rated Felpro parts in these categories are:
Fuel Pump Mounting Gasket
from $2.99
(26)
Fuel Pump Mounting Gasket
Fuel Pump Block-Off Plate Gaskets

Top-Rated Mr. Gasket Fuel and Emissions Systems

Leading Mr. Gasket Fuel and Emissions Systems

We carry Mr. Gasket brand parts for your GMC PM253 across several catalog categories, including Fuel Pumps. Some of our most reviewed Mr. Gasket parts include:
Electric Fuel Pump
from $64.99
(37)
Electric Fuel Pump
Fuel Pumps

FAQs for GMC PM253 Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the GMC PM253?

Out of 8 Fuel and Emissions Systems for the GMC PM253, the most popular in our inventory are:
Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack
from $24.99
This product is not rated
Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack
Gas Caps
EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706
from $83.99
This product is not rated
EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706
EGR Valve Adapters