GMC P35/P3500 Van Belts and Hoses

Please Select your Vehicle to See Exact Fit Parts

Essential GMC P35/P3500 Van Belts and Hoses

Imperial – Engine Oil Cooler Hose (Part No.240112)

Engine Oil Cooler Hose

from

$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
  • Size: 1/2 in. x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
  • Medium duty applications
See More

Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)

Metal Line Kit for Engine Oil Cooler

from

$59.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
  • Used on Chevrolet V8 applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
  • Comes with all parts needed for the job
See More

Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26501)

Green Stripe Heavy-Duty Vulco-Flex Coolant Hose

from

$29.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Designed to resist electrochemical degradation, which is the primary cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Heat, oil and ozone resistant
  • Meets SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transport applications.
  • Caution: Do not use for fuel or oil transfer applications.
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.50" Long, 1.50" Diameter (Part No.E70751)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.50" Long, 1.50" Diameter

from

$12.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25808)

Vulco-Flex II Flexible Coolant Hose

from

$45.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with a minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Molded Heater Hose: EPDM, Direct Fit, 1.5" Inside Diameter (Part No.20686)

Molded Heater Hose: EPDM, Direct Fit, 1.5" Inside Diameter

from

$37.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • The specially designed materials resist collapse under vacuum.
  • Designed to resist electrochemical degradation, the main cause of casing failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
  • Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
  • Warning: Do not use for fuel or oil transfer applications
See More

Gates – Automotive XL High Capacity V-Belt (Part No.9400)

Automotive XL High Capacity V-Belt

from

$38.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Ground to ensure precise dimensional control of the top width and side wall for proper fit to the pulley.
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resistant to oil, heat, ozone, weathering and aging for a longer belt life.
  • Meets or exceeds SAE J636C specifications
See More

Gates – Automotive XL High Capacity V-Belt (Part No.9540)

Automotive XL High Capacity V-Belt

from

$34.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermoactive traction ropes for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Gates – Vulco Straight Coolant Hose (Sold by inch) (Part No.24028)

Vulco Straight Coolant Hose (Sold by inch)

from

$1.99
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.

Product Features:
  • Heat-resistant cover
  • Cover marked in 1-inch increments to facilitate approximate cut lengths, allows for “custom” installations.
  • Meets the requirements of SAE 20R1 standard for Class D-2 walls
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance-free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17.38" Long, 1.75" Diameter (Part No.D70575)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17.38" Long, 1.75" Diameter

from

$21.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Yukon Gear – Seal Puller Tool (Part No.56063)

Seal Puller Tool

from

$57.99
Pinion and axle seal puller. No return.

Product Features:
  • Seal puller
See More

Dayco – Straight Heater Hose; EPDM Rubber, 1 Inch Diameter (sold by foot) (Part No.80319)

Straight Heater Hose; EPDM Rubber, 1 Inch Diameter (sold by foot)

from

$4.99
This premium Dayco Insulone Heater Hose delivers heated coolant to the heater core with minimal heat loss. The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives. A special compound used in the insulating layer provides an added measure of protection against heat loss. Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: NOT suitable for fuel or oil transfer.

Product Features:
  • Synthetic EPDM rubber compounds and spiral reinforcement provides excellent burst strength and heat resistance
  • Compatible with all common coolants and coolant additives
  • Insulating layer provides an added measure of protection against heat loss
  • Performs well in temperature ranges of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • PLEASE NOTE: Item is sold and priced by the foot. See store for details.
See More

Dayco – Straight Heater Hose; EPDM Rubber, 3/4 Inch Diameter (sold by foot) (Part No.80273)

Straight Heater Hose; EPDM Rubber, 3/4 Inch Diameter (sold by foot)

from

$1.29
Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:
  • Specifically designed to be compatible with all common coolants and coolant additives
  • Constructed using all EPDM compounds and spiral reinforcements
  • Similar to SAE 20R3, Class D-2
  • Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • PLEASE NOTE: Item is sold and priced by the foot. See store for details.
See More

Dayco – Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (Part No.80271)

Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot)

from

$1.99
Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:
  • Specifically designed to be compatible with all common coolants and coolant additives
  • Constructed using all EPDM compounds and spiral reinforcements
  • Similar to SAE 20R3, Class D-2
  • Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • PLEASE NOTE: Item is sold and priced by the foot. See store for details.
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Holley – Tall M/T Valve Covers for Big Block Chevy Engines – Natural Cast Finish (Part No.241-150)

Tall M/T Valve Covers for Big Block Chevy Engines - Natural Cast Finish

from

$492.99
Product Features:
  • Cast aluminum construction for even gasket sealing and high quality details
  • Tall M/T valve covers for BBC applications allow for generous aftermarket rocker and some applications of stud girdle clearance
  • Precision manufactured with knock-out plugs for stock PCV (smog control) and oil fill installations
  • Includes baffle plates (with mounting screws) and a period correct twist-on oil fill cap
  • Deep heat dissipating fins
  • Top cover surface retains vintage style nameplate pad for custom engraving
  • Available in three classic finishes: natural cast, polished, and satin black with machined fins/logo
See More

Holley – High Output Mechanical Fuel Pump – 110 GPH Free Flow (Part No.12-327-11)

High Output Mechanical Fuel Pump - 110 GPH Free Flow

from

$165.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

Product Features:
  • High Output Fuel Flow
  • Flows 110 gph Free Flow
  • Shutoff Pressure Pre-Set From 6.5 To 8 PSI
  • Fuel Pressure Regulator Is Not Required
  • Heavy Duty Construction For Continuous High rpm Operation
  • Fuel Body Casting Can Be Rotated For Plumbing Situations
  • Inlet And Outlet Tapped For 3/8 in. NPT
  • Inlet/Outlet Tapped For 3/8 in. NPT
See More

Holley – Big Block Chevy Mid-Mount Complete Accessory System (Part No.20-242)

Big Block Chevy Mid-Mount Complete Accessory System

from

$2250.00
Product Features:
  • The Mid-Mount complete accessory system has all accessories pulled in tighter than other accessory drives.
  • Bracketless accessory mounting with ultra-easy assembly
  • O-ring seal to engine
  • Hidden thermostat bypass and heater hose ports with NPT line adapters included
  • LT1 style premium alternator
  • LT1 style water pump design
  • Compact SD7 A/C compressor with line adapter included
  • Type II power steering pump with baffled reservoir
  • P/S adapter hardline to AN -6 adapter included
  • OE pulley ratios for optimal accessory performance
  • Available in natural and black finishes
  • Billet alternator, tensioner, and compressor pulley covers
See More

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28411)

Safety Stripe Standard Straight Heater Hose (Sold by foot)

from

$3.79
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for long periods of time, which prolongs the service life
  • Compliant with SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Warning: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Dayco – Straight Radiator Hoses; EPDM Rubber, 1 1/2 Inch Inner Diameter (sold by inch) (Part No.76150)

Straight Radiator Hoses; EPDM Rubber, 1 1/2 Inch Inner Diameter (sold by inch)

from

$1.29
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:
  • Meets SAE J20R4, Class D-2 requirements
  • Features a high strength knitted reinforcement and synthetic EPDM rubber construction
  • Resistant to standard coolants, ozone and other detrimental environmental elements
  • PLEASE NOTE: Priced and sold by inch. See store for details.
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.50" Long, 1.25" Diameter (Part No.A70562)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.50" Long, 1.25" Diameter

from

$10.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Premium Molded Coolant Hose (Part No.20563)

Premium Molded Coolant Hose

from

$15.79
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
  • Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
  • temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Helping You Find the Right Belts and Hoses for Your GMC P35/P3500 Van

You love your P35/P3500 Van. So we’ve made it easier than ever to help you find GMC P35/P3500 Van Belts and Hoses in our online catalog. Our inventory holds 158 aftermarket and OEM Belts and Hoses for your GMC P35/P3500 Van, ranging from $1.29 to $2,419.00.

We offer parts from 6 brands trusted to make quality Belts and Hoses for your GMC P35/P3500 Van. Before you buy, take some time to read through customer reviews. We currently have 6,447 reviews of GMC P35/P3500 Van Belts and Hoses from previous customers. Some of the top rated parts include Bottom Cog V-Belt; 34.5 Inch Long, Exact Fit Premium Quality with 4.8 stars and Automotive V-Belt, Driveworks with 4.3 stars.

Find your P35/P3500 Van Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC P35/P3500 Van part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Belts and Hoses Brands for Your GMC P35/P3500 Van

Our inventory holds Belts and Hoses for your GMC P35/P3500 Van from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Imperial, and Holley, all of which can keep that GMC happy.

Top-Rated Dayco Belts and Hoses

Leading Dayco Belts and Hoses

We carry Dayco brand parts for your GMC P35/P3500 Van across several catalog categories, including Radiator Hoses and Serpentine and V Belts. Some of our most reviewed Dayco parts include:

FAQs for GMC P35/P3500 Van Belts and Hoses

What are the most purchased Belts and Hoses for the GMC P35/P3500 Van?

Out of 158 Belts and Hoses for the GMC P35/P3500 Van, the most popular in our inventory are:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Transmission Oil Cooler Hoses
Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot)
from $1.99
This product is not rated
Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot)
Heater Hoses

What are the top-rated GMC P35/P3500 Van Belts and Hoses?

Top-rated Belts and Hoses for your GMC P35/P3500 Van based on customer reviews/ratings are:
Bottom Cog V-Belt; 34.5 Inch Long, Exact Fit Premium Quality
from $15.79
(12)
Bottom Cog V-Belt; 34.5 Inch Long, Exact Fit Premium Quality
“I use this as the wheel drive belt for my older riding mower. I have used this belt before as it works much better than the substitute belt manufactur”
Automotive V-Belt, Driveworks
from $5.49
(12)
Automotive V-Belt, Driveworks
“Turns alternate”
High Output Mechanical Fuel Pump - 110 GPH Free Flow
from $165.99
(12)
High Output Mechanical Fuel Pump – 110 GPH Free Flow
“Used it in my 1930 hot rod.”