GMC P2500 Air Intakes

Essential GMC P2500 Air Intakes

Carquest – Carburetor Choke Pull-Off (Part No.779-106)

Carburetor Choke Pull-Off

from

$42.05
Carquest distributes a full line of engine management products, providing the aftermarket with premium quality and comprehensive coverage.
See More

Felpro – Carburetor Choke Tube Gasket (Part No.72587)

Carburetor Choke Tube Gasket

from

$1.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Edelbrock – Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair) (Part No.12457)

Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair)

from

$13.99
The Edelbrock 94 #12457 Carburetor Jets .057″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:
  • 57 Maximum Jet Size
  • 0.056 in. Orifice Diameter
  • 1/14-32 in. Thread Size
  • Standard Main Jet Type
  • Set of 2
See More

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)

For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers

from

$47.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

Edelbrock – Carburetor Accelerator Pump Diaphragm #12400 30cc (Part No.12400)

Carburetor Accelerator Pump Diaphragm #12400 30cc

from

$12.99
Product Features:
  • The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
  • Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
See More

ACDelco – Multi-Purpose Temperature Sensor (Part No.213-928)

Multi-Purpose Temperature Sensor

from

$35.99
ACDelco GM Original Equipment Multi Purpose Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Help – Throttle Return Spring (Part No.59209)

Throttle Return Spring

from

$9.99
This throttle return spring is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this throttle return spring matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this spring is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Edelbrock – Carburetor Gasket Kit #12370 Fits 2300, 4150, 4160, 4165, And Some 4500 Carbs (Part No.12370)

Carburetor Gasket Kit #12370 Fits 2300, 4150, 4160, 4165, And Some 4500 Carbs

from

$19.99
The Edelbrock #12370 comes with fuel bowl and metering block gaskets. The Edelbrock #12370 is designed to be used with Holley 2300, 4150, 4160, 4165, and some 4500 carburetors.

Product Features:
  • Nitrile Rubber Material
  • Metering Block, Fuel Bowl Type
  • Set of 4
  • Fits Holley® 2300, 4150, 4160, 4165, And Some 4500 Carburetors
  • Made In The USA
See More

Carquest Premium – Throttle Position Sensor (Part No.ECC1245)

Throttle Position Sensor

from

$70.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1740)

Carburetor Tune-Up Kit

from

$29.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Felpro – Air Cleaner Mounting Gasket (Part No.60038)

Air Cleaner Mounting Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific, providing unsurpassed quality for a seal you can trust
  • Validated for fit, form, and function
  • Engineered for the sealing repair environment
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

ACDelco – Fuel Injection Throttle Body Gasket Kit (Part No.219-607)

Fuel Injection Throttle Body Gasket Kit

from

$77.99
ACDelco Professional Fuel Injection Throttle Body Repair Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90314-2)

Engine Intake Manifold Gasket Set

from

$29.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Carquest – Needle and Seat (Part No.93-554R)

Needle and Seat

from

$9.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
See More

Edelbrock – Standard Flow Carburetor Power Valve #12665 Single Stage 6.5in Hg (Part No.12665)

Standard Flow Carburetor Power Valve #12665 Single Stage 6.5in Hg

from

$16.99
Product Features:
  • The Edelbrock #12665 Single Stage 6.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
  • During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.
See More

Wells Vehicle Electronics – Carburetor Choke Thermostat (Part No.2C1103)

Carburetor Choke Thermostat

from

$24.99
The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:
  • Application matched components ensure carburetor can be returned to like new condition.
See More

Edelbrock – Carburetor Gasket Kit #12371 Fits 4160 Carburetors (Part No.12371)

Carburetor Gasket Kit #12371 Fits 4160 Carburetors

from

$19.99
The Edelbrock #12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock #12371 fits Holley 4160 carburetors.

Product Features:
  • Nitrile Rubber Material
  • Metering Block Type
  • Set of 4
  • Fits Holley® 4160 Carburetors
  • Made In The USA
See More

Edelbrock – Single-Quad Manifold and carb Kit for 1957-86 Small-Block Chevy (Part No.2023)

Single-Quad Manifold and carb Kit for 1957-86 Small-Block Chevy

from

$900.99
The Edelbrock #2023 Single-Quad Manifold and carb kit is designed for 1957-86 Small-Block Chevy applications. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a

Product Features:
  • Satin Finish
  • Single-Quad Manifold
  • Thunder Series AVS2 800 cfm Carb
  • Performer RPM Manifold
  • Made In The USA
See More

United Carb – Remanufactured Carburetor 4 Barrel (Part No.3-3622)

Remanufactured Carburetor 4 Barrel

from

$316.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

Edelbrock – Carburetor Accelerator Pump Cam Kit #12403 for 2300, 4150, And 4160 Carburetors (Part No.12403)

Carburetor Accelerator Pump Cam Kit #12403 for 2300, 4150, And 4160 Carburetors

from

$40.99
The Edelbrock #12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “lift” will directly

Product Features:
  • Multi-Color
  • Plastic Material
  • Fits Holley® 2300, 4150, And 4160 Carburetors
  • Set of 8
  • Made In The USA
See More

Edelbrock – Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl (Part No.12600)

Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl

from

$13.99
The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45

Product Features:
  • Fits Holley® Carburetors With Center Hung Fuel Bowl
  • Includes Adjusting Nut
  • Includes Locking Screw
  • Includes O-Ring
  • Includes Washers
See More

Dorman – Breather Element Clips – GM 2002-76-Use with breather elements: AC; FB59: Fram; CA19: Purolator; AF9 (Part No.41251)

Breather Element Clips - GM 2002-76-Use with breather elements: AC; FB59: Fram; CA19: Purolator; AF9

from

$1.99
Breather Element Clips – GM 2002-76-Use with breather elements: AC; FB59: Fram; CA19: Purolator; AF9

Dorman – Help – Breather Element Clips – GM 2002-76-Use with breather elements: AC; FB59: Fram; CA19: Purolator; AF9 (Part No.41113)

Breather Element Clips - GM 2002-76-Use with breather elements: AC; FB59: Fram; CA19: Purolator; AF9

from

$1.49
This air cleaner fastener is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this air cleaner fastener is designed to match the fit and function of the original part on specified vehicles
  • Ideal solution – this fastener is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Barometric Pressure Sensor Connector (Part No.PTA1166)

Barometric Pressure Sensor Connector

from

$17.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Helping You Find the Right Air Intakes for Your GMC P2500

You love your P2500. So we’ve made it easier than ever to help you find GMC P2500 Air Intakes in our online catalog. Our inventory holds 67 aftermarket and OEM Air Intakes for your GMC P2500, ranging from $1.49 to $900.99.

We offer parts from 12 brands trusted to make quality Air Intakes for your GMC P2500. Before you buy, take some time to read through customer reviews. We currently have 1,307 reviews of GMC P2500 Air Intakes from previous customers. Some of the top rated parts include Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny with 3.8 stars and Intake Manifold Bolts with 4.6 stars.

Find your P2500 Air Intakes here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC P2500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Air Intakes Brands for Your GMC P2500

Our inventory holds Air Intakes for your GMC P2500 from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like FELPRO, ACDelco, and Mr. Gasket, all of which can keep that GMC happy.

Top-Rated Felpro Air Intakes

Leading Felpro Air Intakes

We carry Felpro brand parts for your GMC P2500 across several catalog categories, including Intake Manifold Parts and Carburetor Parts. Some of our most reviewed Felpro parts include:
Engine Intake Manifold Gasket Set
from $29.99
(46)
Engine Intake Manifold Gasket Set
Intake Manifold Gasket Sets
Carburetor Mounting Gasket
from $16.29
(3)
Carburetor Mounting Gasket
Carburetor and Injector Mount Gaskets

FAQs for GMC P2500 Air Intakes

What are the most purchased Air Intakes for the GMC P2500?

Out of 67 Air Intakes for the GMC P2500, the most popular in our inventory are:
Multi-Purpose Temperature Sensor
from $35.99
(21)
Multi-Purpose Temperature Sensor
Intake Manifold Temperature Sensors
Fuel Injection Throttle Body Gasket Kit
from $77.99
(2)
Fuel Injection Throttle Body Gasket Kit
Throttle Body Repair Kits
Intake Manifold Bolts
from $15.49
(12)
Intake Manifold Bolts
Intake Manifold Bolt Sets

What are the top-rated GMC P2500 Air Intakes?

Top-rated Air Intakes for your GMC P2500 based on customer reviews/ratings are:
Intake Manifold Bolts
from $32.09
(5)
Intake Manifold Bolts
“Excellent product.”
Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors
from $14.99
(4)
Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors
“Was the wrong slip joint. Catalog was very confusing to use and misleading. Had to locate through another website.”