GMC P15/P1500 Van Air Intakes

Essential GMC P15/P1500 Van Air Intakes

Edelbrock – Carburetor Accelerator Pump Diaphragm #12401 50cc (Part No.12401)

Carburetor Accelerator Pump Diaphragm #12401 50cc

from

$31.99
Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.

Product Features:
  • Rubber Material
  • For Holley®, Barry Grant, And Demon Gasoline Carburetors
  • No Hardware Included
  • 50cc Volume
  • Made iIn The USA
See More

Edelbrock – Standard Main Jet Carburetor Metering Jet #12456 Size .055 (Pair) (Part No.12456)

Standard Main Jet Carburetor Metering Jet #12456 Size .055 (Pair)

from

$13.99
The Edelbrock 94 #12456 Carburetor Jets .056″ Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:
  • 56 Maximum Jet Size
  • 0.055 in. Orifice Diameter
  • 1/14-32 in. Thread Size
  • Standard Main Jet Type
  • Set of 2
See More

Edelbrock – Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair) (Part No.12457)

Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair)

from

$13.99
The Edelbrock 94 #12457 Carburetor Jets .057″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:
  • 57 Maximum Jet Size
  • 0.056 in. Orifice Diameter
  • 1/14-32 in. Thread Size
  • Standard Main Jet Type
  • Set of 2
See More

Mr. Gasket – Intake Manifold Bolts (Part No.6091)

Intake Manifold Bolts

from

$32.09
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Product Features:
  • Features 12-point Smaller-than-standard Bolt Head
  • Thick Flat Washers Distribute Optimum Clamp Load
  • Ideal Use Where Space Is Minimal On Race Manifolds
  • Bolts And Washers Zinc Plated For Protection
  • Zinc Plated For Protection
See More

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)

For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers

from

$47.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

Edelbrock – Carburetor Gasket Kit #12371 Fits 4160 Carburetors (Part No.12371)

Carburetor Gasket Kit #12371 Fits 4160 Carburetors

from

$19.99
The Edelbrock #12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock #12371 fits Holley 4160 carburetors.

Product Features:
  • Nitrile Rubber Material
  • Metering Block Type
  • Set of 4
  • Fits Holley® 4160 Carburetors
  • Made In The USA
See More

Edelbrock – Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors (Part No.12382)

Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors

from

$14.99
Product Features:
  • The Edelbrock #12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 Carburetors.
  • Kit includes two black nitrile fuel bowl gaskets.
See More

Carquest – Carburetor Kit (Part No.96-236)

Carburetor Kit

from

$19.99
Carquest by BWD manufactures and distributes a full line of engine management products, providing the aftermarket with premium quality and comprehensive coverage. 

Product Features:
  • Direct-fit OE replacement ensures proper fit, form, and function, which leads to a trouble-free installation
  • Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
  • Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
  • Undergoes extensive testing and validation for proper performance and peak reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1739)

Carburetor Tune-Up Kit

from

$25.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Edelbrock – Standard Flow Carburetor Power Valve #12625 Single Stage 2.5in Hg (Part No.12625)

Standard Flow Carburetor Power Valve #12625 Single Stage 2.5in Hg

from

$16.99
The Edelbrock #12625 Single Stage 2.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation

Product Features:
  • Gasket Or Seal Included
  • 2.5 in. Hg Opening Vacuum
  • Single Stage
  • Standard Flow Type
  • Made In The USA
See More

Edelbrock – Standard Flow Carburetor Power Valve #12635 Single Stage 3.5in Hg (Part No.12635)

Standard Flow Carburetor Power Valve #12635 Single Stage 3.5in Hg

from

$16.99
The Edelbrock #12635 Single Stage 3.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation

Product Features:
  • Gasket Or Seal Included
  • 3.5 in. Hg Opening Vacuum
  • Single Stage
  • Standard Flow Type
  • Made In The USA
See More

Dorman – Help – Throttle Return Spring (Part No.59209)

Throttle Return Spring

from

$9.99
This throttle return spring is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this throttle return spring matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this spring is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Edelbrock – Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold (Part No.7525)

Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold

from

$484.99
Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.

Product Features:
  • Based on C26 Low Profile with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • 1.625 in. Taller Than Low-Profile PN[5425]
  • Also Available In EnduraShine Finish PN[75254]
  • Also Available As Complete Kit PN[2025/20254]
  • Best When Matched with Edelbrock 500cfm Carburetor
  • Use Fuel Line Kit PN[8088/8091]
  • Use Progressive Throttle Linkage Kit PN[7094]
See More

Edelbrock – Single-Quad Manifold and carb Kit for 1957-86 Small-Block Chevy (Part No.2023)

Single-Quad Manifold and carb Kit for 1957-86 Small-Block Chevy

from

$900.99
The Edelbrock #2023 Single-Quad Manifold and carb kit is designed for 1957-86 Small-Block Chevy applications. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a

Product Features:
  • Satin Finish
  • Single-Quad Manifold
  • Thunder Series AVS2 800 cfm Carb
  • Performer RPM Manifold
  • Made In The USA
See More

Felpro – Carburetor Mounting Gasket (Part No.9288)

Carburetor Mounting Gasket

from

$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Carburetor Mounting Gasket (Part No.9249)

Carburetor Mounting Gasket

from

$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9617)

Engine Intake Manifold Gasket Set

from

$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Edelbrock – Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip (Part No.12602)

Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip

from

$18.99
Product Features:
  • The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
  • Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.
See More

Edelbrock – Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)

Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip

from

$20.99
The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23

Product Features:
  • Center Hung Floats
  • 0.11 in. Needle Diameter
  • Viton® Needle Material
  • Sold Individually
  • Non-Adjustable Type
See More

Edelbrock – Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl (Part No.12600)

Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl

from

$13.99
The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45

Product Features:
  • Fits Holley® Carburetors With Center Hung Fuel Bowl
  • Includes Adjusting Nut
  • Includes Locking Screw
  • Includes O-Ring
  • Includes Washers
See More

United Carb – Remanufactured Carburetor 1 Barrel (Part No.3-3327)

Remanufactured Carburetor 1 Barrel

from

$299.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

United Carb – Remanufactured Carburetor 1 Barrel (Part No.3-3428)

Remanufactured Carburetor 1 Barrel

from

$222.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

United Carb – Remanufactured Carburetor 2 Barrel (Part No.3-3340)

Remanufactured Carburetor 2 Barrel

from

$250.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

United Carb – Remanufactured Carburetor 1 Barrel (Part No.3-3320)

Remanufactured Carburetor 1 Barrel

from

$310.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

United Carb – Remanufactured Carburetor 1 Barrel (Part No.3-3380)

Remanufactured Carburetor 1 Barrel

from

$274.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More

Helping You Find the Right Air Intakes for Your GMC P15/P1500 Van

You love your P15/P1500 Van. So we’ve made it easier than ever to help you find GMC P15/P1500 Van Air Intakes in our online catalog. Our inventory holds 62 aftermarket and OEM Air Intakes for your GMC P15/P1500 Van, ranging from $1.99 to $900.99.

We offer parts from 8 brands trusted to make quality Air Intakes for your GMC P15/P1500 Van. Before you buy, take some time to read through customer reviews. We currently have 79 reviews of GMC P15/P1500 Van Air Intakes from previous customers. Some of the top rated parts include Intake Manifold Bolts with 4.6 stars and Throttle Return Spring with 1.0 stars.

Find your P15/P1500 Van Air Intakes here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC P15/P1500 Van part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Air Intakes Brands for Your GMC P15/P1500 Van

Our inventory holds Air Intakes for your GMC P15/P1500 Van from 8 trusted brands. You’ll find OEM and aftermarket parts from brands like Mr. Gasket, Edelbrock, and FELPRO, all of which can keep that GMC happy.

FAQs for GMC P15/P1500 Van Air Intakes

What are the most purchased Air Intakes for the GMC P15/P1500 Van?

Out of 62 Air Intakes for the GMC P15/P1500 Van, the most popular in our inventory are:
Intake Manifold Bolts
from $15.49
(12)
Intake Manifold Bolts
Intake Manifold Bolt Sets
Engine Intake Manifold Gasket Set
from $19.99
(1)
Engine Intake Manifold Gasket Set
Intake Manifold Gasket Sets
Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors
from $43.99
This product is not rated
Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors
Carburetor and Injector Seal Kits

What are the top-rated GMC P15/P1500 Van Air Intakes?

Top-rated Air Intakes for your GMC P15/P1500 Van based on customer reviews/ratings are:
Intake Manifold Bolts
from $32.09
(5)
Intake Manifold Bolts
“Excellent product.”
Throttle Return Spring
from $9.99
(1)
Throttle Return Spring
“Poor product”