GMC M340 Engine Parts

Essential GMC M340 Engine Parts

ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)

1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16

from

$98.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:
  • Made Of 8740 Chrome Moly Forgings
  • Heat Treated To 180,000 PSI
  • Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
  • Lengths Are Exact Designed To Provide Positive Seating Every Time
  • Set of 16
  • .800″ Adjuster Thread Length
  • 3/8-24 Shank Diameter and Thread
  • 3/8″ Typical Small Block Application
See More

ARP Auto Racing – For Use With All Chevy Small Blocks, 8740 Steel, 190000 Psi (Part No.134-7901)

For Use With All Chevy Small Blocks, 8740 Steel, 190000 Psi

from

$24.99
Many an engine has been destroyed as a result of oil pump driveshaft failure. To cure this all too common problem, ARP has designed an extra heavy duty shaft that will provide you with the necessary reliability. The shaft is made from heat treated, premium grade aerospace chrome moly steel. Moreover, the shaft diameter is a larger diameter than the OEM unit. These features combine to enable ARP shafts to handle the added torque requirements of increased capacity oil pumps or heavy viscosity lubricants.

Product Features:
  • Extra Heavy Duty Shaft That Will Provide The Necessary Reliability
  • Enable Shafts To Handle The Added Torque Requirements Of Increased Capacity Oil Pumps Or Heavy Viscosity Lubricants
  • Made From Premium Grade 8740 And Heat Treated To 190,000 Psi
  • Alignment Sleeve Is Roll Formed Onto The Shaft (Not Welded Or Pinned), Enabling The Sleeve To Float, Allowing For Slight Misalignment
  • Black Oxide
See More

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Engine Valve Spring Retainer Keeper

from

$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 5112)

Engine Valve Stem Oil Seal Set

from

$16.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Specialized gasket set called R.A.C.E. or Remainder to Assemble Complete Engine
  • Includes rear main seal, timing cover gasket and seals and fuel pump gaskets
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

ARP Auto Racing – Small Block/ Big Block Chevy, 5/16" – 18 Thread Size, .75" Head L, 1/2" Socket (Part No.134-1001)

Small Block/ Big Block Chevy, 5/16" - 18 Thread Size, .75" Head L, 1/2" Socket

from

$6.99
Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Product Features:
  • ARP Quality Delivers Increased Pre Load Clamping Force And Assures Positive Timing Gear Register
  • Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
  • Increased Material Strength Overcomes Valve Train Harmonics And Stress
  • Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
  • Set of 3
  • 180,000 PSI
  • .75″ Underhead Length
See More

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Fuel Pump Mounting Gasket

from

$3.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Includes all parts needed to complete the repair
See More

ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Chrome Moly, With Washers (Part No.134-3601)

For Use With Chevy Small Block, Black Oxide, Chrome Moly, With Washers

from

$136.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:
  • High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
  • Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
  • Rated At 180,000 PSI Tensile Strength
  • High Performance Head Bolts Are Stronger
See More

ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)

ARP Cylinder Head Stud Kit

from

$321.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. 

Product Features:
  • 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • Small Block Chevy
  • Sold As A Kit
See More

ARP Auto Racing – For Use With Chevy Small Block Large Journal, 4 Bolt Main, Hex Head, Chrome Moly (Part No.134-5202)

For Use With Chevy Small Block Large Journal, 4 Bolt Main, Hex Head, Chrome Moly

from

$85.99
Far superior to any other main bolt kit offered for use in competition engines, ARP main bolts are designed to meet the exacting standards and demands of professional engine builders. Forged from 8740 chrome moly, all bolts feature generous under head radius and rolled threads for the utmost reliability. The threads are rolled after heat treating, which makes them about 1000 Percent longer fatigue life than most main bolts, which are threaded prior to heat treating. Available in the popular High Performance Series, which, at a nominal rating of 180,000 PSI, is a premium replacement for OEM fasteners, or the 200,000 PSI nominal rated Pro Series, application specific main bolts with reduced wrenching head and are designed for use in competition applications. Parallel ground, hardened washers are included with each kit.

Product Features:
  • Forged From Premium Grade 8740 Chrome Moly Steel
  • Generous Under Head Radius And Rolled Threads For The Utmost Reliability
  • Threads Are Rolled After Heat Treating, Which Makes Them About 1000 Percent Longer Fatigue Life Than Most Main Bolts, Which Are Threaded Prior To Heat Treating
  • Parallel Ground, Hardened Washers Are Included With Each Kit
  • Large Journal
  • Sold As A Kit
  • 180,000 PSI
See More

ARP Auto Racing – For Use With Chevy Small Block, Hex Head, Black Oxide, Chrome Moly (Part No.230-7001)

For Use With Chevy Small Block, Hex Head, Black Oxide, Chrome Moly

from

$8.99
you have probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is insurance that no conscientious engine builder should be without The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.

Product Features:
  • Nominally Rated At 170,000 Psi Tensile Strength To Provide You With Plenty Of Clamping Force
  • Premium Grade Oil Pump Stud
  • The Studs Come With Flat Washers And Nuts
  • Black Oxide Finished 8740
See More

Edelbrock – Victor-Link Adjustable True-Roller Timing Chain Set (Part No.7880)

Victor-Link Adjustable True-Roller Timing Chain Set

from

$178.99
Product Features:
  • Keyway Adjustable
  • Double Roller Timing Chain Type
  • Induction Hardened Billet Steel Material
  • 9-Keyway Setting Points
  • For Chevys Opperating in 6500-8500 RPM Range
See More

ARP Auto Racing – For Use With Chevy Small Block With Standard 2 Piece Cork Gasket (Part No.234-1802)

For Use With Chevy Small Block With Standard 2 Piece Cork Gasket

from

$40.99
The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.

Product Features:
  • Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
  • Bolt Kits Come With Washers
  • Stud Kits Come Complete With A Special Locking
  • Easily Installed Without The Worry Of Cross-Threading
See More

Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)

Valve Seat for S/B Chevy heads with 1.60" Valves

from

$19.99
Product Features:
  • Valve Seats
  • Performer Series
  • 50-State Street Legal
See More

Felpro – Fuel Pump Bowl Gasket (Part No.773)

Fuel Pump Bowl Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Sealed Power – Engine Assembly Lubricant (Part No.55-400)

Engine Assembly Lubricant

from

$10.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Formulated for prelubrication cam lobes, lifters & engine bearings
  • Increases load carrying capacity
  • Holds fast to surfaces
  • Exacting tolerances
  • Meets or exceeds OEM specifications
  • 4.0 oz. Squeeze Container
See More

Mr. Gasket – Oil Dipstick And Tube (Part No.6235)

Oil Dipstick And Tube

from

$16.49
Mr. Gasket Oil Dipstick is similar in design to original equipment, it can be installed with simple hand tools.

Product Features:
  • Fits Chevy Small Block 1955-79 283-400 CID
  • Block Mounted
  • Chrome Plated Steel
See More

Sealed Power – Engine Valve Lifter (Part No.HT-951B)

Engine Valve Lifter

from

$7.29
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Sealed Power – Engine Push Rod (Part No.RP-3028)

Engine Push Rod

from

$2.49
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
See More

Sealed Power – Engine Piston Ring Set (Part No.E-240X 30)

Engine Piston Ring Set

from

$56.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Felpro – Engine Oil Pan Gasket Set – Blue Stripe cork-rubber (Part No.OS 6412 C)

Engine Oil Pan Gasket Set - Blue Stripe cork-rubber

from

$14.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
  • SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Dorman – Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each) (Part No.555-007)

Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each)

from

$1.79
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 4569)

Engine Valve Cover Gasket Set

from

$13.99
Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
  • SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – Engine Valve Cover Load Spreader Set (Part No.ES 72676)

Engine Valve Cover Load Spreader Set

from

$34.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Includes all parts needed to complete the repair
See More

Edelbrock – Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome (Part No.4860)

Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome

from

$34.99
Edelbrock part #4860 S/B Chevy Chrome Timing Cover (with Welded Reinforcement Plate) This stamped steel timing covers for small-block Chevrolet has a reinforcement plate welded to the inside of the cover for added strength. This timing cover is ideal for

Product Features:
  • Stamped Steel Material
  • Comes W/ Front Crankshaft Seal Installed
  • W/ Welded Reinforcement Plate
  • Chrome Finish
  • Ideal For Preventing Camshaft Walk When Used W/ Thrust Button
See More

Helping You Find the Right Engine Parts for Your GMC M340

You love your M340. So we’ve made it easier than ever to help you find GMC M340 Engine Parts in our online catalog. Our inventory holds 53 aftermarket and OEM Engine Parts for your GMC M340, ranging from $0.43 to $1,654.99.

We offer parts from 8 brands trusted to make quality Engine Parts for your GMC M340. Before you buy, take some time to read through customer reviews. We currently have 189 reviews of GMC M340 Engine Parts from previous customers. Some of the top rated parts include Engine Valve Spring Retainer Keeper with 5.0 stars and RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam with 5.0 stars.

Find your M340 Engine Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC M340 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Engine Parts Brands for Your GMC M340

Our inventory holds Engine Parts for your GMC M340 from 8 trusted brands. You’ll find OEM and aftermarket parts from brands like FELPRO, Sealed Power, and Mr. Gasket, all of which can keep that GMC happy.

FAQs for GMC M340 Engine Parts

What are the most purchased Engine Parts for the GMC M340?

Out of 53 Engine Parts for the GMC M340, the most popular in our inventory are:
Oil Dipstick And Tube
from $16.49
(11)
Oil Dipstick And Tube
Engine Oil Dipsticks
Engine Valve Lifter
from $9.99
(1)
Engine Valve Lifter
Engine Valve Lifters
Rubber Expansion Plug 1-7/8 In. - Size Range 1-7/8 In. - 2 In.
from $8.99
This product is not rated
Rubber Expansion Plug 1-7/8 In. – Size Range 1-7/8 In. – 2 In.
Rubber Freeze Plugs

What are the top-rated GMC M340 Engine Parts?

Top-rated Engine Parts for your GMC M340 based on customer reviews/ratings are:
Engine Valve Spring Retainer Keeper
from $0.43
(2)
Engine Valve Spring Retainer Keeper
“You guys are always great”
RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam
from $1040.99
(1)
RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam
“Great performance and look at a great price”
E-Tec-200 Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam
from $936.99
(1)
E-Tec-200 Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam
“Edelbrock Etec 200 Vortec aluminum small block Chevrolet heads. These are approximately 20lbs less weight per a head than the stock ones I am replacin”