GMC K35/K3500 Pickup Belts and Hoses
Top GMC K35/K3500 Pickup Belts and Hoses Categories
We carry over 163 Belts and Hoses in inventory for the GMC K35/K3500 Pickup. If you’re looking for aftermarket Belts and Hoses for your GMC K35/K3500 Pickup, check out all these categories:
Essential GMC K35/K3500 Pickup Belts and Hoses
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25480)
from
$25.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for improved leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Heat, oil and ozone resistant
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transportation applications.
Gates – Premium Molded Coolant Hose (Part No.20841)
from
$26.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically designed materials resist collapse under vacuum
- Designed to withstand electrochemical degradation, the leading cause of hose failure
- Pre-formed for a good fit and to ensure perfectly sealed connections
- EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Warning: Do not use for fuel or oil transfer applications
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25476)
from
$29.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimal inventory
- Heat, oil and ozone resistant
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Degrees F (+125 Degrees C)
- Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transportation applications.
Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28412)
from
$3.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transportation applications.
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19.50" Long, 1.50" Diameter (Part No.E70751)
from
$12.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Flex Radiator Hoses; EPDM Rubber, 21.44 Inch Long, 1.5 Inch Inner Dia. (Part No.81492)
from
$15.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.
Product Features:
See More
Product Features:
- Designed to meet OE specifications
- Not suitable for oil or heat transfer
- Meets SAE J20R4, Class D-2 requirements for improved service hoses
- This hose is designed to prevent splitting, ballooning, and elongation
Yukon Gear – Seal Puller Tool (Part No.56063)
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14.50" Long, 1.75" Diameter (Part No.C70623)
from
$24.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18" Long, 1.50" Diameter (Part No.E70735)
from
$27.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25530)
from
$35.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for increased leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimal inventory
- Heat, oil and ozone resistant
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 degrees Celsius. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Warning: Do not use for fuel or oil transfer applications
Dayco – Straight Heater Hose; EPDM Rubber, 3/4 Inch Diameter (sold by foot) (Part No.80273)
from
$1.29
Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Specifically designed to be compatible with all common coolants and coolant additives
- Constructed using all EPDM compounds and spiral reinforcements
- Similar to SAE 20R3, Class D-2
- Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Dayco – Straight Heater Hose; EPDM Rubber, 1 Inch Diameter (sold by foot) (Part No.80319)
from
$4.99
This premium Dayco Insulone Heater Hose delivers heated coolant to the heater core with minimal heat loss. The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives. A special compound used in the insulating layer provides an added measure of protection against heat loss. Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Synthetic EPDM rubber compounds and spiral reinforcement provides excellent burst strength and heat resistance
- Compatible with all common coolants and coolant additives
- Insulating layer provides an added measure of protection against heat loss
- Performs well in temperature ranges of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Dayco – Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (Part No.80271)
from
$1.99
Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Specifically designed to be compatible with all common coolants and coolant additives
- Constructed using all EPDM compounds and spiral reinforcements
- Similar to SAE 20R3, Class D-2
- Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Dayco – V-Belt, Top Cog, Dayco (Part No.15348)
from
$12.99
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Driveworks – Automotive V-Belt, Driveworks (Part No.53515)
from
$5.49
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Dayco – Bottom Cog V-Belt; 51.5 Inch Long, Exact Fit Premium Quality (Part No.17515)
from
$18.79
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
- Provides greater durability and flexibility 35% stronger than all previous versions
- Features specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Dayco – Bottom Cog V-Belt; 50 Inch Long, Exact Fit Premium Quality (Part No.15500)
from
$13.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Driveworks – Automotive V-Belt, Driveworks (Part No.54515)
from
$4.99
Driveworks engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Driveworks Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.
Product Features:
See More
Product Features:
- Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
- No-Noise Advanced Design EPDM rubber compound for quiet extended life
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (Part No.28411)
from
$1.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7.50" Long, 1.50" Diameter (Part No.B70541)
from
$25.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 3.50" Long, .75" Diameter (Part No.A70647)
from
$19.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Premium Molded Coolant Hose (Part No.20563)
from
$17.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Designed to resist electrochemical degradation, which is the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
- Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
- Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transportation applications.
GMC K35/K3500 Pickup Belts and Hoses Categories
Helping You Find the Right Belts and Hoses for Your GMC K35/K3500 Pickup
You love your K35/K3500 Pickup. So we’ve made it easier than ever to help you find GMC K35/K3500 Pickup Belts and Hoses in our online catalog. Our inventory holds 163 aftermarket and OEM Belts and Hoses for your GMC K35/K3500 Pickup, ranging from $1.29 to $59.99.
We offer parts from 5 brands trusted to make quality Belts and Hoses for your GMC K35/K3500 Pickup. Before you buy, take some time to read through customer reviews. We currently have 4,254 reviews of GMC K35/K3500 Pickup Belts and Hoses from previous customers. Some of the top rated parts include Automotive V-Belt, Driveworks with 4.3 stars and Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24" Long, 1.50" Diameter with 4.8 stars.
Find your K35/K3500 Pickup Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC K35/K3500 Pickup part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Belts and Hoses Brands for Your GMC K35/K3500 Pickup
Our inventory holds Belts and Hoses for your GMC K35/K3500 Pickup from 5 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Imperial, and Gates, all of which can keep that GMC happy.
We have Driveworks parts available for your GMC K35/K3500 Pickup in categories like Serpentine and V Belts. Some of the top-rated Driveworks parts in these categories are:
Top-Rated Dayco Belts and Hoses
Leading Dayco Belts and Hoses
We carry Dayco brand parts for your GMC K35/K3500 Pickup across several catalog categories, including Radiator Hoses and Serpentine and V Belts. Some of our most reviewed Dayco parts include:
from
$24.99
(184)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14.50" Long, 1.75" Diameter
Coolant Hoses
FAQs for GMC K35/K3500 Pickup Belts and Hoses
What are the most purchased Belts and Hoses for the GMC K35/K3500 Pickup?
Out of 163 Belts and Hoses for the GMC K35/K3500 Pickup, the most popular in our inventory are:
from
$1.99
This product is not rated
Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot)
Heater Hoses
from
$27.99
(12)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18" Long, 1.50" Diameter
Coolant Hoses
What are the top-rated GMC K35/K3500 Pickup Belts and Hoses?
Top-rated Belts and Hoses for your GMC K35/K3500 Pickup based on customer reviews/ratings are:
from
$44.99
(8)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24" Long, 1.50" Diameter
“Quality hose! Perfect fit! Just what I was looking for!”
