from

$85.99

Far superior to any other main bolt kit offered for use in competition engines, ARP main bolts are designed to meet the exacting standards and demands of professional engine builders. Forged from 8740 chrome moly, all bolts feature generous under head radius and rolled threads for the utmost reliability. The threads are rolled after heat treating, which makes them about 1000 Percent longer fatigue life than most main bolts, which are threaded prior to heat treating. Available in the popular High Performance Series, which, at a nominal rating of 180,000 PSI, is a premium replacement for OEM fasteners, or the 200,000 PSI nominal rated Pro Series, application specific main bolts with reduced wrenching head and are designed for use in competition applications. Parallel ground, hardened washers are included with each kit.

Product Features:

Forged From Premium Grade 8740 Chrome Moly Steel
Generous Under Head Radius And Rolled Threads For The Utmost Reliability
Threads Are Rolled After Heat Treating, Which Makes Them About 1000 Percent Longer Fatigue Life Than Most Main Bolts, Which Are Threaded Prior To Heat Treating
Parallel Ground, Hardened Washers Are Included With Each Kit
Large Journal
Sold As A Kit
180,000 PSI

from

$5.49

This engine oil filter tube grommet is designed to match the fit and function of the original grommet on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this engine oil filter tube grommet is designed to match the fit and function of the original grommet on specified vehicles
Restores functionality – this grommet is made to fit and fully restore part functionality after the original grommet fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications
All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$32.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Validated for fit, form, and function
Engineered for the sealing repair environment
Unsurpassed quality you can trust

from

$209.99

All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:

Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
Nominally Rated At 200,000 Psi Tensile Strength
These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

from

$8.99

Our uniquely designed pilot seal expansion plugs ensure a leak-proof fit.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$14.99

Heat Treated Steel Bearing Race Material. Must Machine Cam Sprocket or Engiine Block .030″ to Ensure Proper Chain Alignment. Prevents Wear On Engine Block. Can be Used to Repair a Damaged Engine Block Thrust Surface.

Product Features:

Heat Treated Steel Bearing Race Material
Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment
Prevents Wear On Engine Block
Can be Used to Repair a Damaged Engine Block Thrust Surface.

from

$18.99

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Hypereutectic
Made with exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
Sophisticated “barrel” profiles help optimize oil wedge between skirt and wall.
Piston skirts protected by next-gen DUROSHIELD coating.
TAC ring groove geometry
Weight matched to +/- 2 grams.

from

$10.99

This engine oil cooler line connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine oil cooler line connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$18.99

Product Features:

For Small-Block Chevy
One Piece Configuration
Includes Front Cover Gasket & Front Seal
Includes Necessary Gaskets & Crankshaft Oil Seal
For Replacement Or Installation

from

$34.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$201.99

Edelbrock part #9653 Pushrods are designed for Chevy 348/409 “W” series V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precis

Product Features:

7.2 in. Length
0.312 in. Diameter
4130 Chromoly Steel Material
Black Oxide Finish
Made In The USA

from

$5.99

The crankshaft position sensor provides a signal to the engine control module (ECM) or ignition control module (ICM) pinpointing the exact location of the crankshaft for spark and fuel injection timing. The electronic control unit (ECU) will also use the signal to identify specific cylinders for misfire detection and cylinder deactivation on some applications. The crankshaft sensor can be found in-line with the crankshaft either mounted to the engine block, or near the flywheel, or the crankshaft damper pulley.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$681.99

Rotomaster remanufactured Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these remanufactured, direct-replacement turbochargers.

from

$119.99

Premium High Performance 3/8″ Pitch Double Roller Replacement True Roller “Z” Chain. 0.250″ Roller Diameter. Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. Featuring a Press Fit Center Link design that Increases Load Distribution. Heat Treated and Processed Links to Maximize Ulitimate Breaking Strength while Remaining Ductile for Toughness. Prestressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$23.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Cast with FM132 Eutectic proprietary alloy
Performance & dependability of original equipment pistons
High quality aluminum
Utilizes ISO & QS certified manufacturing
Meets or exceeds OEM specifications

from

$3.29

Made In USA. Several Melling oil pump applications require the use of an oil pump shaft guide. Melling provides high quality shaft guides for specific pump applications. An oil pump shaft guide is necessary to connect the oil pump drive shaft to the intermediate drive shaft. Melling recommends installing a new oil pump shaft guide when it is needed.

Product Features:

Manufactured from high quality nylon for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$56.99

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

TAC ring groove geometry
Weight matched to +/- 2 grams
Piston skirts protected by next-gen DUROSHIELD coating
Exclusive higher-strength FM-425 alloy with 16.5% silicon finely dispersed throughout the material
Sophisticated barrel profiles help optimize oil wedge between skirt and wall
Machined valve reliefs and circlip grooves; LR-63 lock rings for floated applications

from

$16.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$76.99

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

Steel-backed Babbitt lining material
For use in automotive and high-performance applications
Babbitt designed to deform under extreme loads without damaging other engine parts
Meets unique demands of performance engines
Delivers dependable performance and superior service life
Application-specific design for perfect fit and correct operation

from

$79.05

Driveworks offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$4.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Chrome plated stem
Hard coating added to surface for strength & aiding in lubrication
Note – coating added in varying thicknesses depending on application
Innovative design, using leading edge materials
Utilizes ISO & QS certified manufacturing

from

$159.99

Product Features:

Head: 4.370″ Bore/0.038″ Thick/10.05cc Vol.
Intake: 1.82″x2.05″ Port/.060″ Thick
Exhaust: 1.940″ Round Port
5/16″ Valve Cover
Multi Piece Configuration

from

$110.99

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

H14 Super Duty alloy material
Best bronze alloy material
Does not have flash tin plating
Extreme fatigue resistance & strength
3/4 Grooved
Silicon particles help polish crankshaft journal (reduces wear during operation)

from

$57.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing