GMC K1500 Axle Spindles
Your GMC K1500 will be happy to know that the search for the right Axle Spindles you’ve been looking for is over! Advance Auto Parts has 2 different Axle Spindles for your vehicle, ready for shipping or in-store pick up. The best part is, our GMC K1500 Axle Spindles start from as little as $292.99.
When it comes to your GMC K1500, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Axle Spindles brands so you can shop with complete confidence. Some of our top Axle Spindles brands are Yukon Gear and Belltech. We’re sure you will get the right product to keep that K1500 running for a long time.
Shop online, find the best price on the right product, and have it shipped right to your door. If you prefer to shop in person for the right Axle Spindles for your K1500, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time!
Compare 8 GMC Axle Spindles
Yukon Gear – Dana 44 And GM 8.5" Front Spindle Replacement (Part No.32257)
from
$292.99
Replacement front spindle for Dana 44, & 8.5″, 6 holes, 1.625″ & 2.0″ bearing Journal, front.
Product Features:
See More
Product Features:
- Fits 1976-1991 GM 1/2 ton front, 1973-1980 GM 3/4 ton front, and 1985-1993 Dodge 1/2 ton front
- 6 bolt holes
- 2.00″ and 1.625″ bearing journals
Belltech – Spindle Assembly, 2 Inch Drop, Steel, Set Of 2 (Part No.2509)
from
$438.99
Over 25 years ago, Belltech engineers developed one of the industry firsts that enabled the Sport Truck craze, the Belltech Drop Spindle. By relocating the wheel mounting point a.k.a. spindle pin higher on the spindle casting, our engineers were able to provide a 2 to 3 Inch lowering without affecting any other suspension or steering geometry, not even the shock absorber
Product Features:
See More
Product Features:
- By Relocating The Wheel Mounting Point A.K.A. Spindle Pin Higher On The Spindle Casting
- Our Engineers Were Able To Provide A 2 To 3 Inch Lowering Without Affecting Any Other Suspension Or Steering Geometry, Not Even The Shock Absorber!
- Belltech Spindles Maintain Critical Suspension Geometry And Eliminate Excessive Ball Joint, Shock And Tire Wear Common To Other Methods Of Lowering
- Our Spindles Maintain Critical Suspension Geometry And Eliminate The Possibility Of Suspension Misalignment
- Each Spindle Is Built From High Strength Ductile Iron, Providing The Structural Integrity To Meet And Exceed All Factory Specification
Belltech – Spindle Assembly, 2 Inch Drop, Iron, Set Of 2 (Part No.2508)
from
$433.99
Over 25 years ago, Belltech engineers developed one of the industry firsts that enabled the Sport Truck craze, the Belltech Drop Spindle. By relocating the wheel mounting point a.k.a. spindle pin higher on the spindle casting, our engineers were able to provide a 2 to 3 Inch lowering without affecting any other suspension or steering geometry, not even the shock absorber
Product Features:
See More
Product Features:
- By Relocating The Wheel Mounting Point A.K.A. Spindle Pin Higher On The Spindle Casting
- Our Engineers Were Able To Provide A 2 To 3 Inch Lowering Without Affecting Any Other Suspension Or Steering Geometry, Not Even The Shock Absorber!
- Belltech Spindles Maintain Critical Suspension Geometry And Eliminate Excessive Ball Joint, Shock And Tire Wear Common To Other Methods Of Lowering
- Our Spindles Maintain Critical Suspension Geometry And Eliminate The Possibility Of Suspension Misalignment
- Each Spindle Is Built From High Strength Ductile Iron, Providing The Structural Integrity To Meet And Exceed All Factory Specification
Belltech – Spindle Assembly, 2 To 3 Inch Drop, Ductile Iron, Set Of 2 (Part No.2514)
from
$421.99
Belltech Drop Spindles Offer Various Drop Amounts Depending On Your Application, While Improving Handling And Retaining Factory Ride Quality. Belltech Spindles Maintain Critical Suspension Geometry And Eliminate Excessive Ball Joint, Shock And Tire Wear Common To Other Methods Of Lowering. Each Spindle Is Built From OEM Grade High Strength Ductile Iron, Providing The Structural Integrity To Meet And Exceed All Factory Specifications And Requirements.
Product Features:
See More
Product Features:
- Improving Handling And Retaining Factory Ride Quality
- Powder coated high strength ductile iron castings
- Use Factory Ball Joints And Tie Rod Ends
- 17 Inch Wheels Or Larger Only
- Direct Bolt-On Installation
Belltech – Spindle Assembly, 2 Inch Drop, Iron, Powder Coated, Set Of 2 (Part No.2511)
from
$421.99
Over 25 years ago, Belltech engineers developed one of the industry firsts that enabled the Sport Truck craze, the Belltech Drop Spindle. By relocating the wheel mounting point a.k.a. spindle pin higher on the spindle casting, our engineers were able to provide a 2 to 3 Inch lowering without affecting any other suspension or steering geometry, not even the shock absorber!
Product Features:
See More
Product Features:
- Belltech Spindles Maintain Critical Suspension Geometry And Eliminate Excessive Ball Joint, Shock And Tire Wear Common To Other Methods Of Lowering
- 2 Inch Lowered Ride Height
- 17 Inch Wheels Or Larger Only
- Lower Center Of Gravity For Improved Handling
Belltech – 2 Inch Drop, Iron, Set Of 2 (Part No.2500)
from
$392.99
In 1983, Belltech developed one of the industry’s first revolutionary products to help jump start the Sport Truck craze, the Drop Spindle. By relocating the spindle pin (or hub) higher on the spindle casting, our engineers can provide a 2 to 3 Inch drop without negatively affecting front end suspension or steering geometry, not even the shock absorber. Belltech Drop Spindles offer various drop amounts depending on your application, while improving handling and retaining factory ride quality. Belltech spindles maintain critical suspension geometry and eliminate excessive ball joint, shock and tire wear common to other methods of lowering. Each spindle is crafted from Powder coated, CNC machined, high strength ductile iron castings providing the structural integrity to meet and exceed all factory specifications and requirements.
Product Features:
See More
Product Features:
- Powder Coated High Strength Ductile Iron Castings
- Maintains Factory Geometry And Alignment
- Belltech Spindles Maintain Critical Suspension Geometry And Eliminate Excessive Ball Joint, Shock And Tire Wear Common To Other Methods Of Lowering
- Lower Center Of Gravity For Increased Handling
- Spindles Will Increase The Track Width Of Your Vehicle By Approximately 0.45 Inch Per Side
- Can Be Combined With Lowering Springs, Air Bags, Or Coilovers For A More Aggressive Drop
- Use Factory Ball Joints And Tie Rod Ends
- Direct Bolt-On Installation
Yukon Gear – Replacement Front Spindle For Dana 60, 6 Holes (Part No.32253)
from
$354.99
Replacement front spindle for Dana 60, 6 holes, 7.5″ long, 7″ flange, 2.020×2.255″.
Product Features:
See More
Product Features:
- Fits 1979-1991 GM with Dana Spicer 60 front
- 7.5″ tall
- 7.00″ flange
- 6 bolt holes
- 2.255″ and 2.020″ bearing journals
Yukon Gear – Replacement Front Spindle For Dana 44, GM (Part No.32256)
from
$329.99
Replacement front spindle for Dana 44, GM, 1.625″ & 1.785″ bearing journals.
Product Features:
See More
Product Features:
- Fits 1973-1977 GM half ton front with Dana Spicer 44
- 6 bolt holes
- 1.785″ and 1.625″ bearing journals
FAQs for GMC K1500 Axle Spindles
What are the most popular Axle Spindles for the GMC K1500?
With 2 brands you can trust, our most popular Axle Spindles for the GMC K1500 are:
Find Your GMC K1500 Axle Spindles by Year
People also search Advance Auto for these popular years of GMC K1500 parts:
