GMC Intercoolers

GM Genuine Parts HVAC Heater Hose Connectors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
• GM regularly updates production and service part designs to integrate new materials and technologies

Gates Turbocharger Hose Kits offer the convenience of a complete solution in one kit. Not only are all the parts included, but the turbocharger hose features a construction far superior to the Original Equipment Manufacturer (OEM) equivalent.

Product Features:

• High-quality silicone cover provides extreme temperature resistance in high-temperature under-hood conditions
• Increased durability due to multiple layers of reinforcement, resulting in longer service life
• Specially formulated oil-resistant Fluorelastomer liner prevents damage
• T-bolt clamps with stainless steel band and bridge both resist corrosion and provide higher torque for optimal sealing
• The T-Bolt clamps feature a 301 stainless steel band and bridge to resist corrosion better than carbon steel bands.
• The stainless steel bands, produced with fully rounded edges, prevent hose damage.
• T-Bolt Clamps come with a nut to minimize loosening.

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..

Product Features:

• Powder Coated Wrinkle Black For Heat Resistance
• Works w/aFe or OE Intercooler
• High Quality Clamps and Hi Temp Silicone Couplings For Durability
• Increased Flow and Performance For More Power

This intercooler boot kit is designed to match the original seals required to reseal and repair the intercooler boot on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this intercooler boot kit is designed to match the original seals required to reseal and repair intercooler boot on specified vehicles.
• Ideal solution – this kit is a reliable replacement for original components that are leaking or have failed.
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This BladeRunner GT Series Intercooler represents the next generation of intercoolers, utilizing a 2-5/8in bar and plate core design, making it larger than stock._x000d_End Tanks: The unique BladeRunner end tanks are constructed out of 3/16in TIG-Welded aluminum plates._x000d_2-5/8in Bar and Plate Core Design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the stock tube and fin design._x000d_Billet Aluminum Inlet/Outlet: This BladeRunner Intercooler uses billet aluminum inlet and outlet for superior strength and durability._x000d_Tig-Welded: 100% TIG-Welded by certified craftsmen for race proven strength and durability._x000d_Axillary Ports: This intercooler features four (4) 1/8in NPT ports on the back side of the intercooler for sensors or water methanol injection and two (2) 1/8in NPT ports on the bottom for draining condensation or oil build up._x000d_Perfect Fit: This BladeRunner intercooler utilizes factory mounting locations with the necessary hardware to ensure a secure install.

Product Features:

• 2-5/8in Bar and Plate Core Design
• Billet Aluminum Inlet/Outlet
• 100% TIG-Welded
• Factory-style quick connect fitting

Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that incorporate three multi-directional vanes that efficiently direct air flow through the entire core for maximum cooling. The Bladerunner intercooler also comes with 4 1/8 in. pre-tapped ports for easy gauge installation as well as other auxiliary input options. Tested at 200psi which is perfect for the high boost applications. In recent testing the Bladerunner intercooler produced a 200 deg. temperature drop and a 100 deg. EGT drop as well as increasing air flow by 30 percent. Don’t waste your time and money on modified factory intercooler. Invest in the aFe Bladerunner intercooler. the most sophisticated intercooler design on the planet.

Product Features:

• MDV Technology
• 100% TIG-Welded
• Lower EGTs
• 36% Flow Over Stock

All intercoolers are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensure optimal cooling.

Product Features:

• Carquest intercoolers are superior quality parts that meet or exceed OE specifications.
• Premium quality and performance is ensured through air-to-air wind tunnel testing.
• All intercooler core tubes are fitted with internal fins to ensure proper cooling of turbocharged air to increase intake air density while lowering its temperature, and providing increased engine efficiency.
• Cast aluminum manifolds are TIG welded to core headers to increase strength and durability.

This BladeRunner intercooler tube kit delivers more flow and is more robust to handle higher horsepower and boost than the factory intercooler tubes on the 2017-2019 GM L5P diesel. TIG-welded and designed from aircraft-grade, mandrel bent aluminum tubing,

Product Features:

• Outflows factory I/C tubes by up to 38% for improved performance
• TIG-welded, 3 & 3 1/2 IN mandrel-bent aluminum tubing for better flow
• Premium 5-ply silicone couplings rated at 200 PSI for long lasting durability
• Works with the factory intercooler

BladeRunner charge tubes are designed to replace the factory intercooler tubes with a larger diameter and smoother flow path to reduce resistance and improve airflow. In addition, these tube upgrades incorporate NPT fittings for sensors and auxiliary input options.

Product Features:

• Mandrel-bent powder-coated charge pipes improve performance and appeal
• Includes high-temp couplings and stainless steel t-bolt clamps
• Hassle Free Installation
• Works w/Stock Intercooler

BladeRunner charge tubes are designed to replace the factory intercooler tubes with a larger diameter and smoother flow path to reduce resistance and improve airflow. In addition, these tube upgrades incorporate NPT fittings for sensors and auxiliary input options.

Product Features:

• Mandrel-bent powder-coated charge pipes improve performance and appeal
• Includes high-temp couplings and stainless steel t-bolt clamps
• Hassle Free Installation
• Works w/Stock Intercooler

BladeRunner charge tubes are designed to replace the factory intercooler tubes with a larger diameter and smoother flow path to reduce resistance and improve airflow. In addition, these tube upgrades incorporate NPT fittings for sensors and auxiliary input options.

Product Features:

• Mandrel-bent powder-coated charge pipes improve performance and appeal
• Includes high-temp couplings and stainless steel t-bolt clamps
• Hassle Free Installation
• Works w/Stock Intercooler

BladeRunner charge tubes are designed to replace the factory intercooler tubes with a larger diameter and smoother flow path to reduce resistance and improve airflow. In addition, these tube upgrades incorporate NPT fittings for sensors and auxiliary input options.

Product Features:

• Mandrel-bent powder-coated charge pipes improve performance and appeal
• Includes high-temp couplings and stainless steel t-bolt clamps
• Hassle Free Installation
• Works w/Stock Intercooler

New Platinum Pro Charge Air Cooler/Intercooler, 6.6 Liter V8 Turbo Diesel

Product Features:

• 6.6 Liter V8 Turbo Diesel, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..

Product Features:

• Powder Coated Wrinkle Black For Heat Resistance
• Works w/aFe or OE Intercooler
• High Quality Clamps and Hi Temp Silicone Couplings For Durability
• Increased Flow and Performance For More Power

New Platinum Pro Charge Air Cooler/Intercooler, Tube And Fin Type, 6.6 Liter V8 Turbo Diesel, All Aluminum Construction

Product Features:

• Tube And Fin Type, 6.6 Liter V8 Turbo Diesel, All Aluminum Construction, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..

Product Features:

• Powder Coated Wrinkle Black For Heat Resistance
• Works w/aFe or OE Intercooler
• High Quality Clamps and Hi Temp Silicone Couplings For Durability
• Increased Flow and Performance For More Power

New Platinum Pro Charge Air Cooler/Intercooler, Tube And Fin Type, 6.6 Liter V8 Turbo Diesel, All Aluminum Construction

Product Features:

• Tube And Fin Type, 6.6 Liter V8 Turbo Diesel, All Aluminum Construction, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..

Product Features:

• 3 in. Stainless Steel
• 100% MIG-Welded
• Welded-On aFe Power Plate
• All Hardware Included

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..

Product Features:

• Reduces Restriction
• Improves MPG
• Lower EGTs
• 75% cfm Flow Gain

The Bladerunner charge pipe represents the next generation of Diesel performance products. This Charge Pipe produced 16hp and 49lbs. x ft. of torque on the dyno while out flowing the factory Charge Pipe by 67-percent. Not only will you get increased performance but you will also see lower EGTs and increased MPG. Talk about bang for the buck! This Charge Pipe is constructed of 3″ mandrel bent stainless steel for smooth air flow transition and increased power and comes complete with 5-ply heavy duty couplings and constant tension T-bolt clamps for a tight and secure installation. Note: This kit comes with a bracket to relocate a brake line.

Product Features:

• Charge Pipe Upgrade
• Cold Side
• 2 Year Limited Warranty

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• High Quality Polyester 5 ply Silicone Coupling
• Hassle Free Installation

BladeRunner charge tubes are designed to replace the factory intercooler tubes with a larger diameter and smoother flow path to reduce resistance and improve airflow. In addition, these tube upgrades incorporate NPT fittings for sensors and auxiliary input options.

Product Features:

• Retains Factory Couplings And Clamps
• Powder Coated
• Hassle Free Installation
• Works w/Stock Intercooler

The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..

Product Features:

• Stainless Steel
• 100% MIG-Welded
• All Hardware Included
• Hassle Free Installation

The Bladerunner charge pipe represents the next generation of Diesel performance products. This Charge Pipe produced 16hp and 49lbs. x ft. of torque on the dyno while out flowing the factory Charge Pipe by 67-percent. Not only will you get increased performance but you will also see lower EGTs and increased MPG. Talk about bang for the buck! This Charge Pipe is constructed of 3″ mandrel bent stainless steel for smooth air flow transition and increased power and comes complete with 5-ply heavy duty couplings and constant tension T-bolt clamps for a tight and secure installation. Note: This kit comes with a bracket to relocate a brake line.

Product Features:

• 3 in. Stainless Steel
• 100% MIG-Welded
• Welded-On aFe Power Plate
• All Hardware Included

Product Features:

• High-quality silicone cover provides extreme temperature resistance in high-temperature under-hood conditions
• Increased durability due to multiple layers of reinforcement, resulting in longer service life
• Specially formulated oil-resistant Fluorelastomer liner prevents damage
• T-bolt clamps with stainless steel band and bridge both resist corrosion and provide higher torque for optimal sealing