Name: Edelbrock Carburetor Progressive Throttle Linkage Kit, 1033
Brand: Edelbrock
SKU: 1033
Price: 196.99 USD

Edelbrock Carburetor Progressive Throttle Linkage Kit, 1033

from

$196.99

Be sure to always check that the arms will not become inverted after any adjustment. Some trial and error will be required to achieve a properly balanced set up.

Edelbrock Standard Flow Carburetor Power Valve, 12635

from

$17.99

The Edelbrock No: 12635 Single Stage 3.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.

Edelbrock Carburetor Accelerator Pump, 12401

from

$33.99

Edelbrock No: 12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage

Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip

from

$22.99

Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip.

Edelbrock Carburetor Needle & Seat Hardware Kit, 12600

from

$14.99

The Edelbrock No: 12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon carburetors.

Edelbrock Standard Main Jet Carburetor Metering Jet Size .080 (Pair), 12480

from

$14.99

“The Edelbrock 94 No. 12480 Carburetor Jets .080″”Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.”

Edelbrock Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair)

from

$14.99

Edelbrock Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair).

Holley Supercharger XP Carburetor - Draw-Thru, 0-80576SA

from

$1126.99

By popular demand, Holley is expanding the draw-thru supercharger carburetor line to now include the XP series. Like the existing HP line, these are available in 600, 750, and 950 CFM flow rates and standard polished with black accents. The feature-laden XP includes a contoured venturi inlet for balanced air flow, screw in air bleeds for precision tuning capabilities, high flow billet metering blocks, billet base plate, and Dominator style fuel bowls which allow plumbing from either side.

Holley Carburetor - 770 CFM Alum Street Avenger E/C, 0-83770

from

$699.99

Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

from

$19.99

The Edelbrock No: 12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock No: 12371 fits Holley 4160 carburetors.

Felpro Carburetor Mounting Gasket, 60249

from

$7.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Edelbrock Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415

from

$22.99

Edelbrock Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415.

Edelbrock AVS2 1902 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$458.99

The Edelbrock #1902 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1902 is calibrated for single-quad applications and factory equipped with: Metering Jets – Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5′ Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.

Edelbrock AVS2 1901 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$519.99

The Edelbrock #1901 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1901 is calibrated for single-quad applications and factory equipped with: Metering Jets – Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5′ Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.

from

$88.99

Edelbrock EGR Adapter No: 1476 has made installing your new intake and carburetor easier when using part No: 3701 and No: 3706. When using Edelbrock EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They’re made of cast aluminum and come complete with gaskets and bolts.

Edelbrock Carburetor Accelerator Pump, 12403

from

$43.99

“The Edelbrock No: 12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “”lift”” will directly affects the accelerator pump stroke and pump capacity. While the cam ramp profile and/or shape will control the “”timing”” of the shot. Each kit comes with 8 different accelerator pump cams and will fit Holley 2300, 4150 and 4160 carburetors.”

Edelbrock Carburetor Vacuum Secondary Spring Kit, 12412

from

$26.99

The Edelbrock No: 12412 Vacuum Secondary Spring Kit includes 7 springs that will fit on Holley 4150, 4150HP, 4160 series and various Demon Carburetors.

Edelbrock Carburetor Secondary Throttle Diaphragm, 12404

from

$18.99

The Edelbrock No: 12404 Vacuum Secondary Diaphragm is a replacement service part for popular high performance Quick Fuel, Holley and Demon carburetors.

Edelbrock Performer Series Carburetor Calibration Kit, Helps get the best performance, 1487

from

$66.99

Edelbrock Performer EPS Series 1406 carburetor calibration kit

Edelbrock Transfer Tube O-Rings No. 12416 For Holley No. 4150, No. 4160, No. 4165, And No. 4175 Carbs

from

$12.99

Edelbrock Transfer Tube O-Rings Pair No. 12416 Will Fit Holley 4150, 4160, 4165 &4175 Series Carb

GMC G3500 Carburetor Parts

Your One-Stop Shop For Trusted GMC G3500 Carburetor Parts

Essential GMC G3500 Carburetor Parts

Edelbrock – Edelbrock Carburetor Progressive Throttle Linkage Kit, 1033 (Part No.1033)

Edelbrock – Edelbrock Standard Flow Carburetor Power Valve, 12635 (Part No.12635)

Edelbrock – Edelbrock Carburetor Accelerator Pump, 12401 (Part No.12401)

Edelbrock – Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)

Edelbrock – Edelbrock Carburetor Needle & Seat Hardware Kit, 12600 (Part No.12600)

Edelbrock – Edelbrock Standard Main Jet Carburetor Metering Jet Size .080 (Pair), 12480 (Part No.12480)

Edelbrock – Edelbrock Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair) (Part No.12457)

Holley – Holley Supercharger XP Carburetor – Draw-Thru, 0-80576SA (Part No.0-80576SA)

Holley – Holley Carburetor – 770 CFM Alum Street Avenger E/C, 0-83770 (Part No.0-83770)

Edelbrock – Edelbrock Carburetor Gasket Kit, 12371 (Part No.12371)

Felpro – Felpro Carburetor Mounting Gasket, 60249 (Part No.60249)

Edelbrock – Edelbrock Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415 (Part No.12415)

Edelbrock – Edelbrock AVS2 1902 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1902)

Edelbrock – Edelbrock AVS2 1901 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1901)

Edelbrock – Edelbrock EGR Valve Adapter, 1476 (Part No.1476)

Edelbrock – Edelbrock Carburetor Accelerator Pump, 12403 (Part No.12403)

Edelbrock – Edelbrock Carburetor Vacuum Secondary Spring Kit, 12412 (Part No.12412)

Edelbrock – Edelbrock Carburetor Secondary Throttle Diaphragm, 12404 (Part No.12404)

Edelbrock – Edelbrock Performer Series Carburetor Calibration Kit, Helps get the best performance, 1487 (Part No.1487)

Edelbrock – Edelbrock Transfer Tube O-Rings No. 12416 For Holley No. 4150, No. 4160, No. 4165, And No. 4175 Carbs (Part No.12416)

GMC G3500 Carburetor Parts List

Carburetor Parts Brands You Can Trust For Your GMC G3500

Popular Felpro Carburetor Parts

Top GMC G3500 Carburetor Parts from Edelbrock

Most Purchased GMC G3500 Carburetor Parts from Edelbrock

FAQs for GMC G3500 Carburetor Parts

What are the most purchased Carburetor Parts for the GMC G3500?

What are the top-rated GMC G3500 Carburetor Parts?

Find Your GMC G3500 Carburetor Parts by Year

More Popular Parts for All Makes