GMC G25 Carburetor

Carburetor for a GMC G25

Use the fitment form at the top of the page to select your exact year and engine type for your GMC G25.

• 

  Edelbrock - Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No. 1411)

  Description

  The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1411 Performer Series 750 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
  
  Product Features:

  • Includes PCV Outlet
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports

  5.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  5.0

  5.0

  • 5

    5

    2014-07-10

    5

    5

    Looks sweet sitting on the 23 T bucket

    Looks sweet sitting on the 23 T bucket

    Submitted 2014-07-10

    By tommy

    From Aiken SC

    Shines like a new penny.... icing on the cake .... it just tops off the motor... what else can you say.

    Bottom Line recommended

    Shines like a new penny.... icing on the cake .... it just tops off the motor... what else can you say.

    By tommy from Aiken SC

    BOTTOM LINE recommended

  • 5

    5

    2012-04-07

    5

    5

    Fantastic

    Fantastic

    Submitted 2012-04-07

    By Torino Tyler

    From Cape Coral, Fl

    Looks Great and Performs Great

    Bottom Line recommended

    Looks Great and Performs Great

    By Torino Tyler from Cape Coral, Fl

    BOTTOM LINE recommended

  • 5

    5

    2010-12-28

    5

    5

    great product

    great product

    Submitted 2010-12-28

    By firewoodman

    From canfield, OH

    i put this carb on my dump truck and i couldn't be more pleased. my truck runs great and has better mpg and increased power

    Bottom Line recommended

    i put this carb on my dump truck and i couldn't be more pleased. my truck runs great and has better mpg and increased power

    By firewoodman from canfield, OH

    BOTTOM LINE recommended

  from $545.99

  View Product
• 

  Edelbrock - Performer 1406 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No. 1406)

  Description

  The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
  
  Product Features:

  • Includes PCV Outlet
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2023-05-21

    5

    5

    I will definitely be back! 🍻

    I will definitely be back! 🍻

    Submitted 2023-05-21

    By KickFlip

    From Salem, Oregon

    I love the product, great performance and a awesome chrome look!

    Bottom Line recommended

    I love the product, great performance and a awesome chrome look!

    By KickFlip from Salem, Oregon

    BOTTOM LINE recommended

  • 5

    5

    2021-12-26

    5

    5

    Nice updated version

    Nice updated version

    Submitted 2021-12-26

    By Jc

    From TELFORD, TN

    Like the improved throttle response with this model.

    Bottom Line recommended

    Like the improved throttle response with this model.

    By Jc from TELFORD, TN

    BOTTOM LINE recommended

  • 5

    5

    2021-10-24

    5

    5

    Great Carburetor Right Out Of The Box!

    Great Carburetor Right Out Of The Box!

    Submitted 2021-10-24

    By Mensanot64

    From Cooper City, FL

    I recently picked up a 1966 Plymouth Satellite 2Dr 440 4SP. The previous owner didn't know much about the engine build but it does have headers, an Edelbruck Performer Intake and at bare minimum, a mild but thumpy cam. It had a Edelbrock 600 CFM 1407 (Older but still good carbs) on it. It needed a rebuild for sure but 600CFM. I have run mopars most of my life. I had a 383 with a 750CFM Double Pumper on it but that engine was built to race and big block mopars love big carburetors. First thing I have to decide for my 440 is how much CFM did I need without knowing the engine build was. Using the same old formula, Cubic Inches X RPM divided by 3456 is the common formula for an almost stock engine. Chryslers redline for 440 big blocks was around 5,000 but 5400-5500 wont hurt her. Stock HP for these engines was 375HP. I am guess mines putting out around 425HP. I also used the 5000 Redline in the formula which came out to be 636 CFM so a 650CFM carb was my first simple choice until this engine gets a rebuild. Most muscle car drivers know an Edelbrock is really a set it and forget it carb and is highly recommended for the street and occasional drag race. Now, I needed to fix my carb because it looked old and didn't tune easy. It would occasional stall plus it had a mechanical choke which are a pain for a daily driver. I went for the newer AVS2 Edelbrock since they have some minor advancements plus an electric choke. I bought this off the shelf along with some new rubber fuel lines, a new fuel filter before the mechanical fuel pump and a secondary filter (clear type from Classic Industries online) that goes between the fuel pump and the carburetor. This is required by Edelbrock for warrantees. Take pictures of the old carb first as it makes the install easier. After I replaced the carb, hooked up the electric choke and ground (you have to use the old throttle cable mount or buy a new one), it started right up. The only adjustment I had to make was bump up the idle!!!!

    Bottom Line recommended

    I recently picked up a 1966 Plymouth Satellite 2Dr 440 4SP. The previous owner didn't know much about the engine build but it does have headers, an Edelbruck Performer Intake and at bare minimum, a mild but thumpy cam. It had a Edelbrock 600 CFM 1407 (Older but still good carbs) on it. It needed a rebuild for sure but 600CFM. I have run mopars most of my life. I had a 383 with a 750CFM Double Pumper on it but that engine was built to race and big block mopars love big carburetors. First thing I have to decide for my 440 is how much CFM did I need without knowing the engine build was. Using the same old formula, Cubic Inches X RPM divided by 3456 is the common formula for an almost stock engine. Chryslers redline for 440 big blocks was around 5,000 but 5400-5500 wont hurt her. Stock HP for these engines was 375HP. I am guess mines putting out around 425HP. I also used the 5000 Redline in the formula which came out to be 636 CFM so a 650CFM carb was my first simple choice until this engine gets a rebuild. Most muscle car drivers know an Edelbrock is really a set it and forget it carb and is highly recommended for the street and occasional drag race. Now, I needed to fix my carb because it looked old and didn't tune easy. It would occasional stall plus it had a mechanical choke which are a pain for a daily driver. I went for the newer AVS2 Edelbrock since they have some minor advancements plus an electric choke. I bought this off the shelf along with some new rubber fuel lines, a new fuel filter before the mechanical fuel pump and a secondary filter (clear type from Classic Industries online) that goes between the fuel pump and the carburetor. This is required by Edelbrock for warrantees. Take pictures of the old carb first as it makes the install easier. After I replaced the carb, hooked up the electric choke and ground (you have to use the old throttle cable mount or buy a new one), it started right up. The only adjustment I had to make was bump up the idle!!!!

    By Mensanot64 from Cooper City, FL

    BOTTOM LINE recommended

  from $428.99

  View Product
• 

  Holley - Street Carburetor: 770 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No. 0-80770)

  Description

  Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
  
  Product Features:

  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

  4.5

  Read 2 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2011-11-17

    5

    5

    This was just what I was looking for.

    This was just what I was looking for.

    Submitted 2011-11-17

    By John55Dale

    From Sandpoint, Idaho

    This was the carb that my engine builder suggested.

    Bottom Line recommended

    This was the carb that my engine builder suggested.

    By John55Dale from Sandpoint, Idaho

    BOTTOM LINE recommended

  • 4

    4

    2011-01-22

    4

    4

    Great Carberator no regrets

    Great Carberator no regrets

    Submitted 2011-01-22

    By Bill

    From Wheat Ridge, CO

    Part of restoration process was to replace Rochester and this was a great addition to my 71 Chevy Truck. Performance is dramatically better!! Also changed to Wyland Manifold making transition from cast iron to alluminum and matching products. One suggestion I may have is to clean engine at car wash to speed installation.

    Bottom Line recommended

    Part of restoration process was to replace Rochester and this was a great addition to my 71 Chevy Truck. Performance is dramatically better!! Also changed to Wyland Manifold making transition from cast iron to alluminum and matching products. One suggestion I may have is to clean engine at car wash to speed installation.

    By Bill from Wheat Ridge, CO

    BOTTOM LINE recommended

  from $643.99

  View Product
• 

  Edelbrock - AVS2 1906 Carburetor: 650 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No. 1906)

  Description

  The Edelbrock AVS2 Series #1906 is a satin-finished four-barrel carburetor with electric choke that is designed and calibrated for optimum street performance in engines that require an air-fuel flow of 650 CFM. The AVS2 is a perfect replacement or upgrade that features annular flow primary boosters with a new calibration for improved off-idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered as the carburetor transitions from idle to full throttle. Each annular flow booster features eight equally spaced orifices to improve fuel metering from idle to the main circuit. The improved flow metering makes this carburetor ideal for use with a wide variety of small- and big-block engines with either dual- or single-plane intake manifolds. The Edelbrock AVS2 #1906 includes both timed and full vacuum ports for ignition advance. It comes with: .101 primary and.098 secondary metering jets; .070 x .037 metering rods; orange (5" Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-finished AVS2 with electric choke, order part #19063.
  
  Product Features:

  • Satin Finish
  • Electric Choke
  • 4 Barrel
  • Annular Booster Type
  • 650 cfm Maximum Flow Rating

  4.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 5

    5

    2023-07-08

    5

    5

    I would and will purchase another one for other projects

    I would and will purchase another one for other projects

    Submitted 2023-07-08

    By Btw

    From Fairburn ga

    Easy to install little to no adjustments needed very great product

    Bottom Line recommended

    Easy to install little to no adjustments needed very great product

    By Btw from Fairburn ga

    BOTTOM LINE recommended

  • 5

    5

    2023-05-17

    5

    5

    Yes

    Yes

    Submitted 2023-05-17

    By George

    From Littleton

    This is my second 1 now both trucks have 1 very nice

    Bottom Line recommended

    This is my second 1 now both trucks have 1 very nice

    By George from Littleton

    BOTTOM LINE recommended

  • 3

    3

    2023-04-06

    3

    3

    AVS2 Carburetor

    AVS2 Carburetor

    Submitted 2023-04-06

    By Philip

    From OH

    It did not come with everything necessary to install. had to go back and purchase an important part. For the cost I paid it was disappointing.

    Bottom Line NULL

    It did not come with everything necessary to install. had to go back and purchase an important part. For the cost I paid it was disappointing.

    By Philip from OH

    BOTTOM LINE NULL

  from $453.99

  View Product
• 

  United Carb - Remanufactured Carburetor 4 Barrel (Part No. 3-3592)

  Description

  Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

  4.0

  Read 2 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 4

    4

    2014-03-21

    4

    4

    nice product

    nice product

    Submitted 2014-03-21

    By REMMY

    From GORDON,GA.

    WORKED JUST RIGHT

    Bottom Line recommended

    WORKED JUST RIGHT

    By REMMY from GORDON,GA.

    BOTTOM LINE recommended

  • 4

    4

    2011-04-08

    4

    4

    Well-done rebuild at great price!

    Well-done rebuild at great price!

    Submitted 2011-04-08

    By dabjr2

    From Warriors Mark, PA

    Although I was a bit apprehensive going into this one, I was very pleasantly surprised with the ease of installation and quality of the re-build on this part. Had old part off, new part on, and driving in 20 minutes. Excellent part at a great price. Overall a terrific value for a rebuilt carb for everyday driving and light hauling/towing.

    Bottom Line recommended

    Although I was a bit apprehensive going into this one, I was very pleasantly surprised with the ease of installation and quality of the re-build on this part. Had old part off, new part on, and driving in 20 minutes. Excellent part at a great price. Overall a terrific value for a rebuilt carb for everyday driving and light hauling/towing.

    By dabjr2 from Warriors Mark, PA

    BOTTOM LINE recommended

  from $264.99

  View Product
• 

  Edelbrock - Performer Carburetor #9905 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 9905)

  Description

  Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.

  4.0

  Read 1 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 4

    4

    2013-01-11

    4

    4

    easy install

    easy install

    Submitted 2013-01-11

    By '67 LTD 428

    From wichita ks

    works good when you have all the parts for it after putting the extra parts on i had to modify them so the tranny kickdown and throttle lever did not interfere with each other. also i no longer have over drive need to find out why and the back to barrels on the carb do not open all the way again need to figure out why. the response is still impressive and my car is drivable so it did serve its purpose for now. i would reccommend this to someone else as the carburetor itself did not need any adjustments to the fuel and air mixtures my car is now running better than before.

    Bottom Line recommended

    works good when you have all the parts for it after putting the extra parts on i had to modify them so the tranny kickdown and throttle lever did not interfere with each other. also i no longer have over drive need to find out why and the back to barrels on the carb do not open all the way again need to figure out why. the response is still impressive and my car is drivable so it did serve its purpose for now. i would reccommend this to someone else as the carburetor itself did not need any adjustments to the fuel and air mixtures my car is now running better than before.

    By '67 LTD 428 from wichita ks

    BOTTOM LINE recommended

  from $403.99

  View Product
• 

  Edelbrock - AVS2 1905 Carburetor: 650 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No. 1905)

  Description

  The Edelbrock AVS2 Series #1905 is a satin-finished carburetor with manual choke that is designed and calibrated for optimum street performance in engines that require 650 CFM of air-fuel flow. The AVS2 is a perfect four-barrel replacement or upgrade that features annular flow primary boosters with a new calibration for improved off-idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered as the carburetor transitions from idle to full throttle. Each annular flow booster features eight equally spaced orifices to improve fuel metering from idle to the main circuit. The improved flow metering makes this carburetor ideal for use with a wide variety of small- and big-block engines with either dual- or single-plane intake manifolds. The Edelbrock AVS2 #1905 includes both timed and full vacuum ports for ignition advance. It comes with: .101 primary and.098 secondary metering jets; .070 x .037 metering rods; orange (5" Hg) step-up spring. Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design. For a black-finished AVS2, order part #19053.
  
  Product Features:

  • Square Bore
  • Manual Choke
  • 4 Barrel Count

  from $424.99

  View Product
• 

  Edelbrock - Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No. 1400)

  Description

  The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1400 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out. Secondly, the carburetor has the unique ability to "hold a tune", so the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent, and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with today┐s commercially available gasoline, gasohol, and blended fuels (E10, not E85). The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable and user-friendly for miles and miles of trouble-free operation. The #1400 is an emissions legal part when used with 1980 and older GM V8┐s (Chevrolet, Cadillac, Buick, GMC, Pontiac, and Oldsmobile) originally equipped with non-feedback carburetors. May require the use of adapter plate #2696.
  
  Product Features:

  • Includes EGR ; Fuel Vapor Outlet
  • Electric Choke
  • 4 Barrel
  • Square Bore
  • Electric Choke Installed from Factory
  • Smooth Secondary Transition

  from $530.99

  View Product
• 

  United Carb - Remanufactured Carburetor 4 Barrel (Part No. 3-3512)

  Description

  Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

  from $321.99

  View Product
• 

  Edelbrock - Performer 14053 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Inlet, Black (Part No. 14053)

  Description

  Product Features:

  • The Edelbrock 14053 Performer Series 600 CFM manual choke Black Powder Coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. S
  • Manual Choke, Black
  • 4 Barrel Count
  • Square Bore

  from $492.99

  View Product
• 

  United Carb - Remanufactured Carburetor 4 Barrel (Part No. 3-3513)

  Description

  Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

  from $411.99

  View Product
• 

  United Carb - Remanufactured Carburetor 4 Barrel (Part No. 3-3442)

  Description

  Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

  from $266.99

  View Product