Name: Distributor Primary Lead Wire
Brand: Carquest Premium
SKU: DLA1138
Price: 9.99 USD

from

$9.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system or operating system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$3.29

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Fel-Pro Oil Pan SnapUps 8mm bolts
Designed to hold up the pan and gasket, for one person installation
Engine$aver Hardware
Unsurpassed quality you can trust
Sold in sets of four and are reusable

from

$39.99

This is the replacement canister for MSD distributors equipped with vacuum advance (except the PN 8365 and PN 8362 HEI distributors.)

Product Features:

Replacement Canister
Vacuum Advance Mechanism
For Replacement On PN[8460/8461]
Size Replacement Canister For Distributor PN[8360/8361]

from

$32.49

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$15.99

This bracket allows you to easily remove the vacuum advance from MSD distributors that are CW rotation (except PN 8365 and PN 8362).

Product Features:

Vacuum Advance Lockout
Distributor Accessories
For Use On PN[8360/8361/8572]
Size Can Be Used w/Distributor PN[8360/8361/8572]

from

$129.99

Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable
Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
Original Equipment Equivalent high voltage ignition coils.
100% New Components and fasteners eliminate premature failures.

from

$549.99

Distributors

from

$73.99

Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new unit with no core charges
Precision machined shafts result in high speed accuracy and help prevent bearing failures
Every distributor is tested to ensure reliable and long-lasting performance
O-rings or gaskets included where applicable

from

$24.29

ACDelco Professional Distributor Cap is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cap is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$18.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$18.05

BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:

Distributor cap uses glass-filled polyester resin with dielectric strength as high as 630 volts per mil, for optimum performance.
Distributor cap has aluminum terminals to match OE performance.
The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$9.49

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$7.05

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$7.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine¿s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$8.99

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$8.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$59.99

This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

from

$1.29

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features: