GMC Envoy XUV Fuel and Emissions Systems
Top GMC Envoy XUV Fuel and Emissions Systems Categories
We carry over 137 Fuel and Emissions Systems in inventory for the GMC Envoy XUV. If you’re looking for aftermarket Fuel and Emissions Systems for your GMC Envoy XUV, check out all these categories:
Essential GMC Envoy XUV Fuel and Emissions Systems
Carquest Premium – Multi-Use Connector (Part No.PTA1096)
from
$44.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
GM Genuine Parts – Manifold Absolute Pressure Sensor (Part No.19418808)
from
$106.99
Manifold Absolute Pressure Sensor
Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.ECC1182)
from
$179.99
The Secondary Air Injection system is an emission control device designed to pump fresh air into the engine exhaust system to reduce harmful emissions. The Air Injection Pump Check Valve will allow air flow in one direction only to prevent an engine back-fire condition.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
GM Genuine Parts – Vapor Canister Purge Tube (Part No.12658354)
from
$29.99
GM Genuine Parts Vapor Canister Purge Valve Pipes are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Reman Multi Port Fuel Injector – 8 Pack (Part No.A211-2033-8PK)
from
$549.99
The Carquest line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.
Product Features:
See More
Product Features:
- Includes eight premium fuel injectors
- Each unit is 100% tested to OE specifications
- Includes new o-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)
from
$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Dorman – Panel Retainer (Part No.963-056D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Carquest Premium – Fuel Tank Lock Ring LO1582926 (Part No.LO1582926)
from
$16.99
Carquest Premium offers a complete line of fuel tank lock rings covering a wide variety of North American vehicle applications. Carquest Premium fuel tank lock rings are engineered to meet or exceed all OEM specifications. Carquest Premium fuel tank lock rings are precision stamped and are treated with a rust proof finish to ensure durability and strength.
Product Features:
See More
Product Features:
- Engineered to meet or exceed all OEM specifications
- Precision stamped and are treated with a rust proof finish to ensure durability and strength
Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17511)
from
$19.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Independently tested for emission control
- Protects your fuel from theft and vandalism
- Reduces air pollution with proper sealing and venting
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
Carquest Premium – Fuel Level Sensor (Part No.KBC1017)
from
$37.99
The Fuel Level Sensor is a much more critical sensor that just reporting the fuel level in the fuel tank for the purpose of the fuel level gauge reading. The engine operating system and the vehicles emmissions control system requires this input to protect the engine should the fuel level be so low as to create a lean operating condition and possibly damage the engine. The other feature, and just as important, is the evaporative emmissions system operation. Fuel level must typically be between 15%-85% for the system to purge the fuel vapors.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
GM Genuine Parts – 5-Way Female Gray Multi-Purpose Pigtail (Part No.PT1154)
from
$45.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Autotecnica – Fuel Tank Pressure Sensor (Part No.GM1316398)
from
$21.99
Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive ¿Genuine¿ components.
Product Features:
See More
Product Features:
- Guaranteed Fitment
- Direct-fit OE replacement design restores factory fuel pressure sensor function
- Easy plug-and-play connection
- Manufactured using high-quality materials to withstand intense engine heat
- Alloy conductors minimize electrical resistance for accurate operation
- Designed and tested for reliability and long life
GM Genuine Parts – Fuel Injector Retainer (Part No.12585749)
from
$14.99
GM Genuine Parts Fuel Injector Clips are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Dorman – Fuel Pump Gasket (Part No.911-572)
from
$16.99
This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles
- Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service
- Durable construction – recommended for replacement when the fuel pump or sensor is replaced
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
GM Genuine Parts – Secondary Air Injection Pump Cover Gasket (Part No.219-351)
from
$16.99
GM Genuine Parts Secondary Air Injection Pump Check Valve Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help form a gas-tight seal between the check valve and secondary air components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps maintain controlled air flow to proper air injection components
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Reman Multi Port Fuel Injector – 8 Pack (Part No.A211-1803-8PK)
from
$479.99
The Carquest line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.
Product Features:
See More
Product Features:
- Includes eight premium fuel injectors
- Each unit is 100% tested to OE specifications
- Includes new o-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Dorman – Secondary Air Injection Check Valve (Part No.911-003)
from
$138.99
This secondary air injection check valve is designed to match the fit and function of the original valve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this secondary air injection check valve is designed to match the fit and function of the original valve on specified vehicles
- Restores functionality – this valve is made to fit and fully restore part functionality after the original valve fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Bosch – Oxygen Sensor: 4 Wire, 16.54" Long, Heated, Exact Fit (Part No.15894)
from
$69.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
GM Genuine Parts – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT288)
from
$59.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Vapor Canister Purge Solenoid: Includes Mounting Hardware (Part No.CPC1016)
from
$62.99
Maximize your vehicle’s efficiency and emissions control with Carquest Vapor Canister Purge Solenoids. Engineered for precision, these solenoids seamlessly regulate the flow of fuel vapors from the Vapor Canister to the engine for cleaner combustion, reducing harmful emissions. Built to meet and/or exceed OEM standards, Carquest Purge Solenoids offer reliable functionality, long-lasting durability, and easy installation.
Product Features:
See More
Product Features:
- Enhances overall engine performance by providing proper vapor flow to maintain correct air-fuel mixture.
- Helps reduce harmful emissions and ensures compliance with environmental regulations by controlling the release of fuel vapors into the engine
- Ensures precise operation with electromagnetic principles to control the flow of fuel vapors from the carbon canister to the engine
- Manufactured from high quality engineered materials, resistant to fuel vapors and extreme temperatures, ensuring long lasting performance
- Meets or exceeds all OEM specifications
Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)
from
$8.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)
from
$6.29
GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Fuel Injector O-Ring Kit with Assorted O-Rings (Part No.217-1588)
from
$29.99
GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a seal to prevent fuel leaks
- Helps seal combustion chamber from the elements
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GMC Envoy XUV Fuel and Emissions Systems Categories
Helping You Find the Right Fuel and Emissions Systems for Your GMC Envoy XUV
You love your Envoy XUV. So we’ve made it easier than ever to help you find GMC Envoy XUV Fuel and Emissions Systems in our online catalog. Our inventory holds 137 aftermarket and OEM Fuel and Emissions Systems for your GMC Envoy XUV, ranging from $1.49 to $2,866.99.
We offer parts from 18 brands trusted to make quality Fuel and Emissions Systems for your GMC Envoy XUV. Before you buy, take some time to read through customer reviews. We currently have 5,352 reviews of GMC Envoy XUV Fuel and Emissions Systems from previous customers. Some of the top rated parts include Non-Locking Fuel Tank Cap with 4.4 stars and Locking Fuel Tank Cap with 4.6 stars.
Find your Envoy XUV Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC Envoy XUV part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Fuel and Emissions Systems Brands for Your GMC Envoy XUV
Our inventory holds Fuel and Emissions Systems for your GMC Envoy XUV from 18 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, DENSO, and Bosch, all of which can keep that GMC happy.
We have ACDelco parts available for your GMC Envoy XUV in categories like Air Flow Sensors. Some of the top-rated ACDelco parts in these categories are:
Top-Rated DENSO Fuel and Emissions Systems
Leading DENSO Fuel and Emissions Systems
We carry DENSO brand parts for your GMC Envoy XUV across several catalog categories, including Oxygen Sensors. Some of our most reviewed DENSO parts include:
FAQs for GMC Envoy XUV Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the GMC Envoy XUV?
Out of 137 Fuel and Emissions Systems for the GMC Envoy XUV, the most popular in our inventory are:
What are the top-rated GMC Envoy XUV Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your GMC Envoy XUV based on customer reviews/ratings are:
from
$27.49
(39)
Locking Fuel Tank Cap
“The locking gas cap has been on the car for about 2 weeks–and we LOVE it. My dad broke the factory cap-making my check engine light come on.
I we”
