GMC C35 Ignition and Tune-Up Products

This is the replacement canister for MSD distributors equipped with vacuum advance (except the PN 8365 and PN 8362 HEI distributors.)

Product Features:

• Replacement Canister
• Vacuum Advance Mechanism
• For Replacement On PN[8460/8461]
• Size Replacement Canister For Distributor PN[8360/8361]

Edelbrock part No. 22737 is a bronze alloy drive gear for use on ProFlo EFI & Max-Fire distributor in small-block & big-block Chevrolet engines.

This strong, billet aluminum distributor is set up for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft while an extra long sintered bushing stabilizes the lower portion. Trigger signals are produced via a high-output magnetic pick-up. This pickup is extremely accurate and never requires adjustment. Since this distributor is designed primarily for race engines, an oversized ( . 006 In.) bronze gear is installed along with an adjustable slip collar for modified blocks, heads or intake manifolds.

Product Features:

• Includes built-in Rev Limiter

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

• Bolt-on Performance
• Custom Fit For Make And Model Listed
• Wires Are Pre-Cut To Exact Specifications
• Conductor core features DuPont Kevlar material for increased tensile strength
• Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
• Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

• Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
• Low 500 ohm per foot resistance.
• 8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
• EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
• Fiberglass reinforcing braid for added strength and flexibility.

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
• Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
• Magnet size and strength optimized for precise signal output.
• Precision-wound coated copper windings increase signal output and increase longevity.
• Tailored magnetic circuit programming enhances timing accuracy between the reluctor wheel and circuit output.
• 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
• 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Copper alloy conductors ensure superior electrical conductivity with low resistive losses
• Our parts are 100% tested to verify both mechanical and electrical switching performance
• Robust design and high grade materials meet the stringent demands of today’s service professional
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• 100% new unit with no core charges
• Precision machined shafts result in high speed accuracy and help prevent bearing failures
• Every distributor is tested to ensure reliable and long-lasting performance
• O-rings or gaskets included where applicable
• Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
• Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
• Original Equipment Equivalent high voltage ignition coils.
• 100% New Components and fasteners eliminate premature failures.

Our Chevrolet front drive distributors brought the need for a distributor plug. Both are billet aluminum and feature a slip collar to ensure correct installation depth.

Product Features:

• Use On Engines w/Wet Sump Oil System And Front Drive Dist.
• Supplied w/Bronze Gear
• Must Be Used w/An MSD Crank Trigger
• Adj. slip collar mounting flange for engines w/modified deck hts.
• O-ring seals can be installed for oil press. control (Mods only)
• Special oil tract improves lubrication to the dist./cam gear
• QPQ coated polished steel shaft; guided by sealed ball bearings
• Oversized Polished Steel Shaft w/QPQ Coating

The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:

• Helically wound conductor suppresses electro and radio noise
• Kevlar core combination for great strength and durability
• Heavy Duty Terminals For Secure Connection
• 8mm silicone and synthetic jacket resists heat and abrasion
• 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
• Silicone Boots Protect Against High Exhaust Temps

This Radio Capacitor is a device that will absorb excessive voltage spikes in electrical systems. The typical location or use for a capacitor is inside a distributor tied into a point ignition system. The radio capacitor may also be called a condenser used in electrical devices which may be susceptible to voltage spikes.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
• Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
• Durable construction – made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Black; 8in. Big Bloc

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Add sparkle to your engine with this chromed hold-down clamp. With bolt and gasket. Serrations on the bottom prevent distributor and magneto rotation for accurate timing.

Product Features:

• Rolled Edges For Strength
• Ideal For Magnetos
• Ideal For Ignition Distributor

ACDelco Professional Distributor Cap Cover is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cover is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

• Professional, premium aftermarket replacement
• Provides the performance and dependability you expect from ACDelco
• Manufactured to meet expectations for fit, form, and function

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Fel-Pro Oil Pan SnapUps 8mm bolts
• Designed to hold up the pan and gasket, for one person installation
• Engine$aver Hardware
• Unsurpassed quality you can trust
• Sold in sets of four and are reusable

The Premium DiamondFire Automotive Spark Plug is engineered for peak performance and efficiency, making it a standout choice for drivers seeking enhanced engine output. Featuring E3’s patented Diamond Fire edge-to-edge ground electrode, it delivers a faster, more complete burn for smoother acceleration and idle. The innovative “diamond-shaped” side wire electrode ensures quicker ignition of the air/fuel mixture, creating a larger flame kernel and improving power output by up to 6% on average. Its nickel center and ground electrode tips provide durability and reliable performance, while the tapered seat type ensures a secure fit. Pre-gapped at the factory for convenience, this spark plug also promotes cleaner combustion, reducing engine carbon deposits and contributing to fuel savings. Designed to maximize efficiency and power, its a smart upgrade for any vehicle.

Product Features:

• E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
• Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
• Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
• Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
• E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
• The Spark Plugs are pre-gapped at the factory and cannot be adjusted.

Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:

• Oil Filled For Better Cooling
• Optimized Low Resistance
• Silicon Magnetic Steel E-Core
• Higher Energy/Voltage Outputs
• Quicker Starts
• Improved Idle Quality
• Resists Shock And Vibration
• Resists Corrosion

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

• 7mm And 8mm High Gloss Silicone Jacket
• 450 F Rated Silicone Jacket
• Stainless Steel Plug Terminals
• RFI Suppression For Street Driven Applications
• Custom-fit Universal And Import Coverage
• High-strength Fiberglass Braid Construction
• Pre And Post HEI Vehicles

The Ignition Coil Ground Strap is designed to ground the ignition coil laminations and prevent lost power from the ignition coil.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Attaching hardware provided (where applicable)

With the introduction of our 20 Amp extreme HEI module, we needed an HEI cap and rotor that could withstand the high output. The answer was to mold our own HEI cap, rotor and coil cover. The cap and rotor will fit our HEI Pro-Billet distributor, PN 8365, plus will work on stock applications.

Product Features:

• Extreme output rotor

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

• Designed & manufactured to meet OE performance, durability, and EMC level requirements
• OE quality replacement parts for the right fit, form and function
• Delphi OE technology ignition products are validated to match the vehicle’s engine management system
• Delphi ignition control modules are designed to control the timing of the spark plugs by activating the ignition coil at precise intervals

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

• All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
• Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
• Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
• Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
• Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.