Name: Edelbrock RPM Big-Block Chevy Oval Port Cylinder Head Hydraulic Flat Tappet Cam, 60439
Brand: Edelbrock
SKU: 60439
Price: 1326.99 USD

Edelbrock RPM Big-Block Chevy Oval Port Cylinder Head Hydraulic Flat Tappet Cam, 60439

from

$1326.99

Edelbrock RPM Big-Block Chevy Oval Port Cylinder Head Hydraulic Flat Tappet Cam, 60439.

Sealed Power Engine Rocker Arm Kit, R-826

from

$3.49

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$117.99

Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use. Mr. Gasket provides a Limited Lifetime Warranty for MLS cylinder head gaskets.

Edelbrock RPM Big-Block Chevy Rectangular Port Cylinder Head Flat Tappet Cam, 60559

from

$1353.99

Edelbrock RPM Big-Block Chevy Rectangular Port Cylinder Head Flat Tappet Cam, 60559.

Melling Select Performance Valve Train Set Up Spring, VTSS100

from

$11.79

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

from

$25.99

The Edelbrock No: 9716 Intake Valve Seat is a replacement for Edelbrock cylinder heads.

Sealed Power Engine Rocker Arm Ball, MR-1783

from

$0.65

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Sealed Power Engine Valve Spring Retainer Keeper, VK-115

from

$0.43

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

ARP Auto Racing ARP Cylinder Head Stud Kit, 234-4301

from

$321.99

“ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “”aircraft”” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. ”

Edelbrock Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Chevrolet, 7376

from

$212.99

The Edelbrock No. 7376 head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit and sealing properties when used with Edelbrock aluminum cylinder heads. Edelbrock head gaskets are manufactured from high-density materials and feature a superior design that performs under pressure and provides a long-lasting seal, without re-torqueing.

Felpro Engine Cylinder Head Bolt Set, ES 72856

from

$34.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Dorman Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each), 555-007

from

$1.79

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

"Competition Cams Tool Steel 10 Degree Retainer Set Of 16 For All Valves With 1.250"" O.D. Springs, 1750-16"

from

$258.99

“Competition Cams Tool Steel 10 Degree Retainer Set Of 16 For All Valves With 1.250″” O.D. Springs, 1750-16. ”

from

$196.99

“The Edelbrock No: 4263 Elite II Valve Covers are designed for Chevy 262-400 V8 1959-86 applications. This new line of Elite II valve covers feature a design that is influenced by the original Elite Series originally released in 1985, but with a new modern take on this classic look. They’re made from heavy-gauge, die-cast aluminum and are finished off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Our tall profile valve covers are 2″” taller than stock, and clear most roller rockers and valvetrain components. Our low profile valve covers clear all air-conditioning, alternator brackets and aluminum rockers. Overall height is measured from gasket flange to top at the highest point.”

from

$9.99

Spectre’s Valve Cover Spreader Bar Kits are designed to improve the seal between your valve cover and cylinder head. Constructed from high quality heavy gauge steel, the spreader bars help to evenly distribute clamping pressure, preventing leaks. Featuring a triple chrome-plated finish, this kit is designed to fit Chevrolet 265-400 Small Block engines.

Edelbrock Complete Sure Seat Valve Spring Kit, 5894

from

$163.99

“Edelbrock part No: 5894 Sure Seat Valve Spring Kit is designed for Small-Block Chevy O.E Cast Iron Heads. Made of highest quality spring wire and precision wound to close tolerances. This Sure Seat Valve Spring set is for use on original equipment heads when installing Edelbrock Performer-Plus camshafts. The valve springs are supplied with retainers and lock kit. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application. Set of 16. Valve Spring Specifications: Type: Non-Rotator Seat Pressure: 80 lbs. Installed Height: 1.700″” Open Pressure: 200 lbs. at 0.475″” Outside Diameter: 1.222″” Inside Diameter: 0.875″” Coil Bind: 1.150″””

from

$2.49

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Competition Cams High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6., 812-1

from

$15.99

Competition Cams High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6., 812-1.

"Competition Cams Spring Loaded Rocker Arm Stud Girdle Chevrolet 265-400 Small Block with 3/8"" Stud, 4001"

from

$469.99

“Competition Cams Spring Loaded Rocker Arm Stud Girdle Chevrolet 265-400 Small Block with 3/8″” Stud, 4001. ”

Sealed Power Engine Rocker Arm Nut, MR-1751

from

$0.95

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Sealed Power Engine Intake Valve, V-1926

from

$4.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Mr. Gasket Ultra Seal: Screw-In Rocker Arm Studs, 1076

from

$80.69

Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts.

Mr. Gasket Ultra Seal: Competition Screw-In Rocker Arm Studs, 1074

from

$103.99

Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Mr. Gasket Cylinder Head Dowel Pins, 4375

from

$18.39

Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch.

GMC C25/C2500 Suburban Valve Cover and Cylinder Heads

Your One-Stop Shop For Trusted GMC C25/C2500 Suburban Valve Cover and Cylinder Heads

Essential GMC C25/C2500 Suburban Valve Cover and Cylinder Heads

Edelbrock – Edelbrock RPM Big-Block Chevy Oval Port Cylinder Head Hydraulic Flat Tappet Cam, 60439 (Part No.60439)

Sealed Power – Sealed Power Engine Rocker Arm Kit, R-826 (Part No.R-826)

Mr. Gasket – Mr. Gasket Mls Head Gasket, 3130G (Part No.3130G)

Edelbrock – Edelbrock RPM Big-Block Chevy Rectangular Port Cylinder Head Flat Tappet Cam, 60559 (Part No.60559)

Melling Select Performance – Melling Select Performance Valve Train Set Up Spring, VTSS100 (Part No.VTSS100)

Edelbrock – Edelbrock Valve Seat, 9716 (Part No.9716)

Sealed Power – Sealed Power Engine Rocker Arm Ball, MR-1783 (Part No.MR-1783)

Sealed Power – Sealed Power Engine Valve Spring Retainer Keeper, VK-115 (Part No.VK-115)

ARP Auto Racing – ARP Auto Racing ARP Cylinder Head Stud Kit, 234-4301 (Part No.234-4301)

Edelbrock – Edelbrock Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Chevrolet, 7376 (Part No.7376)

Felpro – Felpro Engine Cylinder Head Bolt Set, ES 72856 (Part No.ES 72856)

Dorman – Dorman Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each), 555-007 (Part No.555-007)

Competition Cams – "Competition Cams Tool Steel 10 Degree Retainer Set Of 16 For All Valves With 1.250"" O.D. Springs, 1750-16" (Part No.1750-16)

Edelbrock – Edelbrock Elite 2 Valve Covers, 4263 (Part No.4263)

Spectre – Spectre Valve Cover Clamps SB, 5321 (Part No.5321)

Edelbrock – Edelbrock Complete Sure Seat Valve Spring Kit, 5894 (Part No.5894)

Sealed Power – Sealed Power Engine Push Rod, RP-3182 (Part No.RP-3182)

Competition Cams – Competition Cams High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6., 812-1 (Part No.812-1)

Competition Cams – "Competition Cams Spring Loaded Rocker Arm Stud Girdle Chevrolet 265-400 Small Block with 3/8"" Stud, 4001" (Part No.4001)

Sealed Power – Sealed Power Engine Rocker Arm Nut, MR-1751 (Part No.MR-1751)

Sealed Power – Sealed Power Engine Intake Valve, V-1926 (Part No.V-1926)

Mr. Gasket – Mr. Gasket Ultra Seal: Screw-In Rocker Arm Studs, 1076 (Part No.1076)

Mr. Gasket – Mr. Gasket Ultra Seal: Competition Screw-In Rocker Arm Studs, 1074 (Part No.1074)

Mr. Gasket – Mr. Gasket Cylinder Head Dowel Pins, 4375 (Part No.4375)

GMC C25/C2500 Suburban Valve Cover and Cylinder Heads List

Valve Cover and Cylinder Heads Brands You Can Trust For Your GMC C25/C2500 Suburban

Popular Victor Reinz Valve Cover and Cylinder Heads

Top GMC C25/C2500 Suburban Valve Cover and Cylinder Heads from Felpro

Most Purchased GMC C25/C2500 Suburban Valve Cover and Cylinder Heads from Felpro

FAQs for GMC C25/C2500 Suburban Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the GMC C25/C2500 Suburban?

What are the top-rated GMC C25/C2500 Suburban Valve Cover and Cylinder Heads?

Find Your GMC C25/C2500 Suburban Valve Cover and Cylinder Heads by Year

More Popular Parts for All Makes