GMC C25 Performance Exhaust Products

Give your vintage vehicle’s exhaust system an upgrade with a DynoMax dual header kit. Designed to attach to OE manifolds, it features a special reducer that allows for a variety of mounting options.

Product Features:

gasket will not because the “Dead Soft” aluminum conforms to create a leak-proof seal. REAL-SEALS can also be easily trimmed for port-matching and

Product Features:

• Multi-Layer “Dead Soft” aluminum conforms to create a leak-proof seal
• Water/Weather Resistant
• Re-Useable
• Will Not Burn Or Blow Out
• Suitable For Port-Matching
• Made In USA

Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:

• Reusable header, exhaust manifold and collector flange gaskets
• Manufactured from “dead soft” aluminum layers – .125″ thick
• Conforms easily to surface irregularities (warped flanges)
• Compresses down to 0.060″ to create a tight leak-proof seal
• Will not shrink, deteriorate, or blow out- eliminating gasket leaks
• For high performance street, drag race and oval track use

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
• Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
• Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
• Slotted bolt holes allow for easier header installation.
• Not intended for use in emission controlled vehicles.

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

• Manufactured from high-temperature steel core/graphite faced exhaust material
• Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
• Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
• Conforms to and seals minor surface irregularities
• Can be trimmed if necessary for modified port applications
• For OE replacement, high performance street, drag race and oval track use
• Anti-Stick Properties
• Easy Removal For Disassembly

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
• Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
• Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
• Slotted bolt holes allow for easier header installation.
• Not intended for use in emission controlled vehicles.

Gaskets

Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.

Product Features:

• High-Temperature Exhaust Material
• Withstands Extreme Exhaust Heat
• Provides Excellent Sealing And Durability
• Superior Tensile Strength
• Resists Deteriorating
• Provides Excellent Torque Retention

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
• Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
• Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
• Slotted bolt holes allow for easier header installation.
• Not intended for use in emission controlled vehicles.

Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

Product Features:

• Bright Ball Burnish Finish
• Made From 304 Stainless
• Compact Hex Head Is Ideal Where Space Is Limited
• 12 Per Set
• Resist corrosion and provides a clean professional appearance

This Spectre Alternator Bracket Kit was designed for 1969-1986 Chevrolet Small Block engines with a long water pump. This triple chrome-plated kit includes two brackets and the hardware needed to mount your alternator in a clean and professional way.

Product Features:

• Designed for ’69-’86 Chevrolet Small Block engines with long water pump
• Kit includes two brackets and mounting hardware
• Triple chrome plated
• Manufactured with high quality materials

Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.

Product Features:

• Bright Ball Burnish Finish
• Made From 304 Stainless
• Compact Hex Head Is Ideal Where Space Is Limited
• 16 per Package
• Resist corrosion and provides a clean professional appearance

Hooker has long been known for its dominance of the drag racing circuit, but did you know that Hooker can help the off-road enthusiast scorch the deserts, mountains and swamps of the world Hooker Headers use long tube lengths and long transition collectors to produce monstrous low – mid range torque without sacrificing top end horsepower. Each Hooker header is designed to provide the finest fit and most durable construction available on the market today. Hooker offers a complete line of full length and emission compatible headers for the off-road enthusiast to choose from. Whether it be a rock crawling Jeep or a 1000 mile desert racer, Hooker can bring your performance expectations to a new level.

Product Features:

• Tuned-length primary tubes for maximum exhaust scavenging and velocity
• Mandrel-bent tubing for smooth exhaust flow
• Light weight & sturdy 18 gauge tubing
• Long transition collector for decreased back pressure
• 5/16″ machined flanges for a perfect seal
• Industry’s best welds for durability
• Designed for optimal performance
• All necessary hardware included for a complete installation

Flow tech headers are the perfect combination of performance and value. Flow tech long tube headers are precision engineered using mandrel bent tubing, formed collectors and 5/16″ flanges with sealing rings for a leak-free seal. All mounting hardware and gaskets are included for a simple installation. This header is coated in a high heat and corrosion resistant metallic ceramic thermal coating that increases exhaust velocity and reduces under hood temps for increased performance.

Product Features:

• Fuel Economy From The Engine
• Leak Test For Max Performance
• Ceramic Headers
• Rust And Corrosion Resistance
• Mandrel-Formed Power Plenum
• Leakproof O-Ringed Port Seals
• Include All Mounting Hardware
• Works with power steering and power brakes

Flow tech headers are the perfect combination of performance and value. Flow tech long tube headers are precision engineered using mandrel bent tubing, formed collectors and 5/16″ flanges with sealing rings for a leak-free seal. All mounting hardware and gaskets are included for a simple installation. This header is coated in a high heat resistant black paint for a stealthy appearance.

Product Features:

• Fuel Economy From The Engine
• Leak Test For Max Performance
• Mandrel-Formed Power Plenum
• Leakproof O-Ringed Port Seals
• Include All Mounting Hardware
• Constructed of .049 cold roll flash mild steel tubing
• Precision engineered for fit, performance and economy
• Works with factory power steering and power brakes

Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler & Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

• Tuned-length primary tubes for maximum exhaust scavenging and velocity
• Mandrel-bent tubing for smooth exhaust flow
• Light weight & sturdy 18 gauge tubing
• Long transition collector for decreased back pressure
• 5/16″ machined flanges for a perfect seal
• Industry’s best welds for durability
• Designed for optimal performance
• All necessary hardware included for a complete installation

Flow tech headers are the perfect combination of performance and value. Flow tech long tube headers are precision engineered using mandrel bent tubing, formed collectors and 3/8″ flanges with sealing rings for a leak-free seal. All mounting hardware and gaskets are included for a simple installation. This header is coated in a high heat resistant black paint for a stealthy appearance.

Product Features:

• Fuel Economy From The Engine
• Precision engineered for fit, performance and economy
• Constructed of .049 cold roll flash mild steel tubing
• Include All Mounting Hardware
• Leakproof O-Ringed Port Seals
• Mandrel-Formed Power Plenum
• Leak Test For Max Performance

Hooker Competition headers offer the best value in the high performance header market. Designed for the value-conscious buyer, Hooker Competition headers offer premium features at a very competitive price. Made of durable 16 gauge mild steel tubing, the Hooker Competition header design utilizes a long transition collector to reduce back pressure and increase exhaust flow. A perfect sealing surface is assured with the 5/16″ machined flanges, with welded O-ring seals. Experience has proven that this flange size is ideal to maintain header integrity and be pliable enough to seal each exhaust port. Tubing is mandrel-bent to maintain metal strength and provide consistent tube diameter at radii to maximize performance. Hooker Competition headers have a standard finish that features a heat-cured, high-heat-resistant paint. Optionally, the famous Hooker Ceramic Thermal Barrier Coating is available.

Product Features:

• Tuned-length primary tubes for better performance
• Mandrel-bent tubing for smooth exhaust flow
• Light weight & sturdy 16 gauge tubing
• Long transition collector for decreased back pressure
• 5/16″ machined flanges for a perfect seal
• Industry’s best welds for durability
• Designed for easy, trouble-free fit
• All necessary hardware included for a complete installation
• Works with factory power steering, power brakes and air conditioning

Flow tech headers are the perfect combination of performance and value. Flow tech long tube headers are precision engineered using mandrel bent tubing, formed collectors and 5/16″ flanges with sealing rings for a leak-free seal. All mounting hardware and gaskets are included for a simple installation. This header is coated in a high heat and corrosion resistant metallic ceramic thermal coating that increases exhaust velocity and reduces under hood temps for increased performance.

Product Features:

• Fuel Economy From The Engine
• Leak Test For Max Performance
• Ceramic Headers
• Rust And Corrosion Resistance
• Mandrel-Formed Power Plenum
• Leakproof O-Ringed Port Seals
• Include All Mounting Hardware

Hooker Competition headers offer the best value in the high performance header market. Designed for the value-conscious buyer, Hooker Competition headers offer premium features at a very competitive price. Made of durable 16 gauge mild steel tubing, the Hooker Competition header design utilizes a long transition collector to reduce back pressure and increase exhaust flow. A perfect sealing surface is assured with the 5/16″ machined flanges, with welded O-ring seals. Experience has proven that this flange size is ideal to maintain header integrity and be pliable enough to seal each exhaust port. Tubing is mandrel-bent to maintain metal strength and provide consistent tube diameter at radii to maximize performance. Hooker Competition headers have a standard finish that features a heat-cured, high-heat-resistant paint. Optionally, the famous Hooker Ceramic Thermal Barrier Coating is available.

Product Features:

• Tuned-length primary tubes for maximum exhaust scavenging and velocity
• Mandrel-bent tubing for smooth exhaust flow
• Sturdy 16-gauge tubing
• Long transition collector for decreased back pressure
• 5/16″ machined flanges for a perfect seal
• Industry’s best welds for durability
• Designed for maximum performance
• All necessary hardware included for a complete installation
• Works with factory power steering, power brakes and air conditioning

Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler & Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

• Tuned-length primary tubes for maximum exhaust scavenging and velocity
• Mandrel-bent tubing for smooth exhaust flow
• Light weight & sturdy 18 gauge tubing
• Long transition collector for decreased back pressure
• 5/16″ machined flanges for a perfect seal
• Industry’s best welds for durability
• Designed for optimal performance
• All necessary hardware included for a complete installation