GMC C25 Valve Cover and Cylinder Heads

“Competition Cams Tool Steel 10 Degree Retainer Set Of 16 For All Valves With 1.250″” O.D. Springs, 1750-16. ”

Edelbrock RPM Big-Block Chevy Rectangular Port Cylinder Head Flat Tappet Cam, 60559.

“Edelbrock part No: 5894 Sure Seat Valve Spring Kit is designed for Small-Block Chevy O.E Cast Iron Heads. Made of highest quality spring wire and precision wound to close tolerances. This Sure Seat Valve Spring set is for use on original equipment heads when installing Edelbrock Performer-Plus camshafts. The valve springs are supplied with retainers and lock kit. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application. Set of 16. Valve Spring Specifications: Type: Non-Rotator Seat Pressure: 80 lbs. Installed Height: 1.700″” Open Pressure: 200 lbs. at 0.475″” Outside Diameter: 1.222″” Inside Diameter: 0.875″” Coil Bind: 1.150″””

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

“ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “”aircraft”” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. ”

Spectre’s Valve Cover Spreader Bar Kits are designed to improve the seal between your valve cover and cylinder head. Constructed from high quality heavy gauge steel, the spreader bars help to evenly distribute clamping pressure, preventing leaks. Featuring a triple chrome-plated finish, this kit is designed to fit Chevrolet 265-400 Small Block engines.

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

The Edelbrock No: 7362 head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit and sealing properties when used with Edelbrock aluminum cylinder heads. Edelbrock head gaskets are manufactured from high-density materials and feature a superior design that performs under pressure and provides a long-lasting seal, without re-torqueing.

All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

“Competition Cams Spring Loaded Rocker Arm Stud Girdle Chevrolet 265-400 Small Block with 3/8″” Stud, 4001. ”

Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts.

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

The Edelbrock No: 9710 Exhaust Valve Seat is a replacement for Edelbrock cylinder heads.

Edelbrock RPM Big-Block Chevy Oval Port Cylinder Head Hydraulic Roller Cam, 60455.

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Edelbrock part No: 9629 Pushrods are designed for small-block Chevy V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise formed wedged ends for a high quality fit with the cup seats. A black oxide finish is added for corrosion resistance.

Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch.

The Edelbrock No. 4477 Signature Series Valve Covers are designed for Chevrolet 194-292 1962-88 Inline 6 (USA) & 1962-2001 (South America) applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1958-1986 Chevrolet Small Block 265-400 engines, this 3-hole valve cover features chrome-plated steel construction and a smooth design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.