GMC C1500 Valve Cover and Cylinder Heads

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

“ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “”aircraft”” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. ”

This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

“Edelbrock part No: 5894 Sure Seat Valve Spring Kit is designed for Small-Block Chevy O.E Cast Iron Heads. Made of highest quality spring wire and precision wound to close tolerances. This Sure Seat Valve Spring set is for use on original equipment heads when installing Edelbrock Performer-Plus camshafts. The valve springs are supplied with retainers and lock kit. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application. Set of 16. Valve Spring Specifications: Type: Non-Rotator Seat Pressure: 80 lbs. Installed Height: 1.700″” Open Pressure: 200 lbs. at 0.475″” Outside Diameter: 1.222″” Inside Diameter: 0.875″” Coil Bind: 1.150″””

The Edelbrock No: 9710 Exhaust Valve Seat is a replacement for Edelbrock cylinder heads.

The Edelbrock No: 44263 valve cover hold-down kits may be used on all Edelbrock and similar design chrome valve covers, our Elite Series and Elite II valve covers, our Classic Series valve covers and our Victor Series valve covers.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Edelbrock RPM Big-Block Chevy Oval Port Cylinder Head Hydraulic Roller Cam, 60455.

The components needed to install hydraulic roller lifters in blocks that were initially fitted with hydraulic roller camshafts are included in COMP Cams hydraulic roller lifter kits. These time-saving kits, assembled by COMP Cams, come with everything you need to install your new COMP Cams hydraulic roller cam without incident.

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Encore Automotive Valve Lifter is a steel cylinder designed to maintain zero valve clearance in a combustion engine.

This engine rocker arm nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

“Competition Cams Spring Loaded Rocker Arm Stud Girdle Chevrolet 265-400 Small Block with 3/8″” Stud, 4001. ”

Dowel pins are precision machined and case hardened for accurate head alignment. Two per set. 5/16 inch x 5/8 inch.

Edelbrock RPM Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet Cam, 60899.

“Competition Cams Spring Loaded Rocker Arm Stud Girdle Chevrolet 265-400 Small Block with 7/16″” Stud, 4004. ”

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

“Competition Cams Tool Steel 10 Degree Retainer Set Of 16 For All Valves With 1.250″” O.D. Springs, 1750-16. ”

Spectre’s Valve Cover Hold Downs feature high quality steel construction with a triple chrome-plated finish. Manufactured for a universal fit, this product’s T-bar heads allow for easy tightening without tools. Sold 4 per package, these studs are intended to fit standard height Chevy Centerbolt valve covers.

Edelbrock part No: 97386 lifter installation kit provides the necessary components to install replacement hydraulic roller lifters in a 1987 and later S/B Chevrolet. Includes original-spec lifter guides and hold down spider.

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

The Edelbrock No: 4185 Classic Series Valve Covers are designed for Chevy Big-Block V8 1965 & Later applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. Made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.