GMC B6000 Belts and Hoses
Top GMC B6000 Belts and Hoses Categories
We carry over 98 Belts and Hoses in inventory for the GMC B6000. If you’re looking for aftermarket Belts and Hoses for your GMC B6000, check out all these categories:
Essential GMC B6000 Belts and Hoses
Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)
from
$59.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Used on Chevrolet V8 applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Comes with all parts needed for the job
Imperial – Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Size: 1/2 in. x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Medium duty applications
Gates – Premium Molded Coolant Hose (Part No.22136)
from
$175.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Designed to resist electrochemical degradation, the main cause of casing failure
- Pre-formed for a good fit and to ensure perfectly sealed connections
- EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Warning: Do not use for fuel or oil transfer applications
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25.50" Long, 2" Diameter (Part No.E70770)
from
$25.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Premium Molded Coolant Hose (Part No.22135)
from
$174.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-formed for a good fit and to ensure perfectly sealed connections
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
- Warning: Do not use for fuel or oil transfer applications
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 2" Diameter (Part No.B70212)
from
$22.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Straight Coolant Hose (Standard) (Sold by inch) (Part No.76213)
from
$1.29
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Priced and sold by inch. See store for details.
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9700HD)
from
$63.99
Designed for the toughest applications, Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at extremely prolonged operating temperatures
- Heavy-duty construction resists cracking, wear, oil and heat
- A special compound ensures unmatched stability, load capacity and belt life.
- The unique notch design under the cord offers greater flexibility for smaller diameter pulleys
- Troubleshooter for problematic drives
- Designed to save your fleet money and reduce downtime
- It meets RMA oil and heat resistance standards and static conductivity requirements
Driveworks – Automotive V-Belt, Driveworks (Part No.38017)
from
$4.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9660HD)
from
$47.99
Designed for the toughest applications, Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at extremely prolonged operating temperatures
- Construction resistant to cracking, wear, oil and heat
- Special compound provides unmatched stability, load carrying capacity and belt life
- The unique notch design under the cord offers greater flexibility for smaller diameter pulleys
- Problem solver for troubled drives
- Engineered to save your fleet money and reduce downtime
- Compliant with RMA standards for oil and heat resistance and static conductivity requirements
Dayco – Straight Heater Hose; EPDM Rubber, 3/4 Inch Diameter (sold by foot) (Part No.80273)
from
$1.29
Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Specifically designed to be compatible with all common coolants and coolant additives
- Constructed using all EPDM compounds and spiral reinforcements
- Similar to SAE 20R3, Class D-2
- Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Dayco – Straight Heater Hose: EPDM Rubber, Universal Fit, 7/8" Inside Diameter (sold by foot) (Part No.80318)
from
$2.49
This premium Dayco Insulone Heater Hose delivers heated coolant to the heater core with minimal heat loss. The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives. A special compound used in the insulating layer provides an added measure of protection against heat loss. Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Synthetic EPDM rubber compounds and spiral reinforcement provides excellent burst strength and heat resistance
- Compatible with all common coolants and coolant additives
- Insulating layer provides an added measure of protection against heat loss
- Performs well in temperature ranges of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Dayco – Straight Heater Hose; EPDM Rubber, 1 Inch Diameter (sold by foot) (Part No.80319)
from
$4.99
This premium Dayco Insulone Heater Hose delivers heated coolant to the heater core with minimal heat loss. The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives. A special compound used in the insulating layer provides an added measure of protection against heat loss. Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Synthetic EPDM rubber compounds and spiral reinforcement provides excellent burst strength and heat resistance
- Compatible with all common coolants and coolant additives
- Insulating layer provides an added measure of protection against heat loss
- Performs well in temperature ranges of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Gates – Premium Molded Coolant Hose (Part No.21095)
from
$76.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- The specially designed materials resist collapse under vacuum.
- Designed to resist electrochemical degradation, the main cause of casing failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
- Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
- Warning: Do not use for fuel or oil transfer applications
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 2.25" Diameter (Part No.E71565)
from
$24.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 2" Diameter (Part No.B70692)
from
$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Driveworks – Poly Rib Belt Serpentine Belt; 67 Long, 6 Rib Count (Part No.670K6)
from
$20.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Dayco – Poly Rib Belt Serpentine Belt; 67 Long, 6 Rib Count (Part No.5060670)
from
$33.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Dayco – Straight Radiator Hoses; EPDM Rubber, 2 1/4 Inch Inner Diameter (sold by inch) (Part No.76225)
from
$1.79
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- PLEASE NOTE: Priced and sold by inch. See store for details.
GMC B6000 Belts and Hoses Categories
Helping You Find the Right Belts and Hoses for Your GMC B6000
You love your B6000. So we’ve made it easier than ever to help you find GMC B6000 Belts and Hoses in our online catalog. Our inventory holds 98 aftermarket and OEM Belts and Hoses for your GMC B6000, ranging from $1.29 to $175.99.
We offer parts from 4 brands trusted to make quality Belts and Hoses for your GMC B6000. Before you buy, take some time to read through customer reviews. We currently have 221 reviews of GMC B6000 Belts and Hoses from previous customers. Some of the top rated parts include Automotive V-Belt, Driveworks with 5.0 stars and Bottom Cog V-Belt; 38.5 Inch Long, Exact Fit Premium Quality with 5.0 stars.
Find your B6000 Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC B6000 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Belts and Hoses Brands for Your GMC B6000
Our inventory holds Belts and Hoses for your GMC B6000 from 4 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Dayco, and Driveworks, all of which can keep that GMC happy.
We have Dayco parts available for your GMC B6000 in categories like Engine Cooling Hoses and Serpentine and V Belts. Some of the top-rated Dayco parts in these categories are:
from
$41.99
(2)
Flex Radiator Hoses; EPDM Rubber, 27.5 Inch Long, 1.5 Inch Inner Dia.
Lower Radiator Hoses
from
$22.99
(1)
Flex Radiator Hoses; EPDM Rubber, 16.5 Inch Long, 1.75 Inch Inner Dia.
Coolant Hoses
Top-Rated Imperial Belts and Hoses
Leading Imperial Belts and Hoses
We carry Imperial brand parts for your GMC B6000 across several catalog categories, including Transmission Cooler Hoses. Some of our most reviewed Imperial parts include:
FAQs for GMC B6000 Belts and Hoses
What are the most purchased Belts and Hoses for the GMC B6000?
Out of 98 Belts and Hoses for the GMC B6000, the most popular in our inventory are:
from
$1.29
This product is not rated
Straight Radiator Hoses; EPDM Rubber, 1 3/4 Inch Inner Diameter (sold by inch)
Upper Radiator Hoses
What are the top-rated GMC B6000 Belts and Hoses?
Top-rated Belts and Hoses for your GMC B6000 based on customer reviews/ratings are:
from
$12.99
(1)
Bottom Cog V-Belt; 38.5 Inch Long, Exact Fit Premium Quality
“Seems like a quality made belt & works as it should.”
from
$25.99
(1)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7.50" Long, 1.50" Diameter
“Exact fit!”
