GMC Acadia Exhaust System Kits

Designed to fit Hooker Competition header, Manifold or catalytic converter back applications. Cat-back kits install behind the converter and all other applicable emission control devices.

Product Features:

• Reducer Flex-Tubes
• Reduces Backpressure
• Hardware Included
• Instructions Included

The Street Series Stainless Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound.

Product Features:

Give your Chevrolet Silverado/GMC Sierra 1500’s exhaust system an upgrade with a DynoMax Ultra Flo welded 3-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:

Upgrade your vintage muscle car’s exhaust system with a Thrush Turbo Header Back System. Featuring Thrush Turbo mufflers with reversible flow chambers, spun-locked heads and aluminized construction, it has everything needed for installation.

Product Features:

• FOR CLASSIC VEHICLES: Designed for 1973-86 Chevrolet/GMC full-size K-Series trucks; see product information for engine spec
• ENGINEERED TO LAST: Features 2.5-in. aluminized smooth bend pipes
• COMPLETE SOLUTION: Designed to bolt to full-length headers, the kit includes H-pipe balance tube and all hangers, brackets and other hardware necessary for installation
• CLASSIC SOUND: Features Thrush Turbo mufflers with tri-flow design with reversible flow chambers for that classic Thrush sound
• STRONG AND DURABLE: Muffler has a 100% aluminized-coated shell and spun lock heads for long life
• EASY TO INSTALL: Bolt-on installation for an easy upgrade; no fabrication or welding required
• BUY WITH CONFIDENCE: Comes with Thrush’s limited warranty

Give your vintage vehicle’s exhaust system an upgrade with a DynoMax dual header kit. Designed to attach to OE manifolds, it features a special reducer that allows for a variety of mounting options.

Product Features:

Hooker Manifold Back exhaust system is constructed of 2-1/4″ 16-gauge aluminized steel tubing for maximum flow and increased performance. This system uses the original equipment tailpipe exit location. Works with any 2-1/4″ offset inlet/center outlet muffler

Product Features:

• Reducer Flex-Tubes
• Reduces Backpressure
• Improves Engine Efficiency
• Hardware Included
• Instructions Included
• Mandrel bent 2-1/4″ 16-guage aluminized steel tubing

Give your vintage vehicle’s exhaust system an upgrade with a DynoMax dual header kit. Designed to attach to OE headers, it features a special reducer that allows for a variety of mounting options.

Product Features:

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade 304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Easy Bolt-On Installation
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

PRO Series is the best performance exhaust system that money can buy. It is a series designed and built for the serious enthusiast who will settle for nothing less. Constructed from T304 stainless steel it delivers you optimal durability that keeps on looking its best. Easy to clean and maintain this is the product of choice for owners of lifted vehicles, show trucks or who operate in severe environments.

Product Features:

• 4 Inch Cat Back Single Side Exit (Street Version) Exhaust System
• 4 Inch Mandrel Bent Tubing
• Moderate Sound Level
• Bolt On, No Weld Design Makes Installation A No Hassle One And A Half To Two Hour Project
• Limited Lifetime Warranty

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combi nation of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Maximum Flow
• High Flow Muffler
• Bayonet Style Hangers For Easy Installation

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-3049 2005-2013 Chevy Silverado/GMC Sierra Reg cab, Ext Cab, Crew Cab/Short Bed 4.3/4.8/5.3L
• Large diameter stainless steel mandrel-bent tube

P Series from MBRP brings you the best of both worlds. Designed and constructed to the exact same specifications as MBRPs Pro Series you can expect the same improvements in torque and horsepower and the same awesome sound as our top of the line products. The difference is the heavy duty aluminized steel construction. You save money without compromising on performance. MBRP Installer Series truly is superior to other aluminized exhaust products on the market. Heavy sixteen gauge steel is one reason. Another is that our systems have a thick protective coating of aluminum silica on the seams – an area that is often left exposed to rust.

Product Features:

• P Series Cat Back System
• The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
• Vehicle Maintains Optimal Operating Temperatures
• Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
• More Torque, More Horsepower, Improved Fuel Mileage And A Reduced Risk Of Pre-Mature Breakdown Or Lubricant Deterioration
• Easy, Bolt-On Design, Makes Easy To Install

Designed for manifold back applications. This system uses 2.25-inch 16-gauge aluminized tubing to reduce back-pressure and improve engine efficiency. The system is mandrel bent to eliminate any crush sections in the tubing to help maximize the exhaust flow for better performance.

Product Features:

• Mandrel Bent Tubing Eliminates Restrictions in Bends and Improves Exhaust Flow
• Reduces Backpressure
• Improves Engine Efficiency
• Hardware Included
• Instructions Included

Designed for Hooker Competition 2452HKR header back applications. This system uses 2.25-inch 16-gauge aluminized tubing to reduce back-pressure and improve engine efficiency. The system is mandrel bent to eliminate any crush sections in the tubing to help maximize the exhaust flow for better performance.

Product Features:

• Mandrel Bent Tubing Eliminates Restrictions in Bends and Improves Exhaust Flow
• Reduces Backpressure
• Improves Engine Efficiency
• Hardware Included
• Instructions Included
• Fits Long Wheelbase Only

Designed for Hooker Competition header back applications. This system uses 2.25-inch 16-gauge aluminized tubing to reduce back-pressure and improve engine efficiency. The system is mandrel bent to eliminate any crush sections in the tubing to help maximize the exhaust flow for better performance.

Product Features:

• Mandrel Bent Tubing Eliminates Restrictions in Bends and Improves Exhaust Flow
• Reduces Backpressure
• Improves Engine Efficiency
• Hardware Included
• Instructions Included

Interested in a new exhaust system for your L5P Duramax? Check out the Large Bore-HD dual DPF-Back exhaust system by aFe. This system is constructed from 4″ mandrel-bent 409 stainless steel tubing and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations and comes with a bolt-on bracket that supports the driver side tailpipe. This provides for a quick, hassle-free installation with no modification necessary. Also included in this exhaust system are dual massive 6″ high temp black powder-coated stainless steel tips with a laser-cut stainless steel aFe power badges. Large Bore-HD exhaust systems are the perfect combination of performance, fit and value. Single To Dual Exhaust Conversion: This exhaust is designed to convert the standard single exhaust into an aggressive dual exhaust. Fits With Spare Tire: This exhaust system fits perfectly without relocating the spare tire. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance: This Large Bore-HD exhaust system is constructed from 4″ mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. Polished Tips: Finishing off the exhaust are dual high luster, polished 304 stainless steel slash-cut tips. This tip features a laser-cut stainless steel aFe power badge for an aggressive style

Product Features:

• Mandrel Bent Stainless Steel Tubing
• High Quality Band Clamps
• OE Style Bayonet Hangers
• Factory Mounting Locations

Designed for Hooker Competition header back applications using header 2452HKR. This system uses 2.25-inch 16-gauge aluminized tubing to reduce back-pressure and improve engine efficiency. The system is mandrel bent to eliminate any crush sections in the tubing to help maximize the exhaust flow for better performance.

Product Features:

• Mandrel Bent Tubing Eliminates Restrictions in Bends and Improves Exhaust Flow
• Reduces Backpressure
• Improves Engine Efficiency
• Hardware Included
• Instructions Included

System features BORLA’s Polyphonic Exhaust Harmonizer which utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound to the BORLA mufflers. The mufflers then enhance this sound to the character and volume appropriate for our Touring, S-Type and ATAK systems. This system features carbon fiber with bright center tips. BORLA Cat-Back Axle-Back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty.

Product Features:

• BORLA Cat-Back Exhausts Feature, Straight Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive BORLA Sound Of Power Respected By Motoring Enthusiasts Everywhere
• Each System Is Built From Aircraft Grade High Quality T-304 Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
• Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power
• Precision Computer Controlled CNC Manufacturing Ensures An Accurate Fit

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

System features BORLA(R) Polyphonic Exhaust Harmonizer which utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound to the BORLA(R) mufflers. The mufflers then enhance this sound to the character and volume appropriate for our Touring, S-Type and ATAK(R) systems. This system features a black chrome finish on T-304 stainless steel tips. Using BORLA(R) Stainless Steel Polish pn 21461 is NOT recommended with these black chrome tips. We suggest cleaning the tips with hot water and a microfiber cloth. BORLA(R) Cat-Back(TM) Axle-Back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA(R) stands behind every system with a Million-Mile Warranty.

Product Features:

• BORLA(R) Cat-Back(TM) Exhausts Feature, Straight Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive BORLA(R) Sound Of Power Respected By Motoring Enthusiasts Everywhere
• Each System Is Built From Aircraft Grade High Quality T-304 Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
• Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power
• Precision Computer Controlled CNC Manufacturing Ensures An Accurate Fit

This system is constructed of durable mandrel-bent 4″ to dual 3″ 304 stainless steel tubing for maximum corrosion resistance. Mandrel-bent tubing for maximum air flow and low turbulence; increasing torque, horsepower and improved throttle response. This system features a high-flow stainless steel muffler, producing a aggressive sound. Muffler finish may vary. This system produces an aggressive sound unleashing all available horsepower and torque. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. This kit includes key fob remotes, control module, valve motor, and all necessary wiring. It’s a simple installation, requiring no cutting of any wires or interference of the automobile’s electronics. This system features an electronically controlled exhaust cutout valve to quickly switch between exhaust tones at the push of a button. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

Product Features:

• Constructed out of 4″ and 3″ Mandrel-Bent 304 Stainless Steel Tubing.
• Utilizes Factory Style Hangers for a Secure Fit
• Includes Electronically Controlled Valve Before the Exhaust Muffler to Quickly Switch Between Mild and Aggressive with the Push of a Button
• 100% MIG-Welded for Strength and Durability
• All Necessary Hardware is Included for a Hassle-Free Installation

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19489 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 1 Straight-Through mufflers ending in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19489 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19489 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• CNC precision robotic manufacturing techniques
• Durable corrosion-resistant stainless steel construction

Gemini XV 3" 304 Stainless Steel Cat-Back Exhaust System with Cut-Out, Black

Gemini XV 3" 304 Stainless Steel Cat-Back Exhaust System with Cut-Out, Black

Gemini XV 3" 304 Stainless Steel Cat-Back Exhaust System with Cut-Out, Black