GMC 280-22 Engine Parts
Top GMC 280-22 Engine Parts Categories
We carry over 82 Engine Parts in inventory for the GMC 280-22. If you’re looking for aftermarket Engine Parts for your GMC 280-22, check out all these categories:
Essential GMC 280-22 Engine Parts
ARP Auto Racing – For Use With All Chevy Small Blocks, 8740 Steel, 190000 Psi (Part No.134-7901)
from
$24.99
Many an engine has been destroyed as a result of oil pump driveshaft failure. To cure this all too common problem, ARP has designed an extra heavy duty shaft that will provide you with the necessary reliability. The shaft is made from heat treated, premium grade aerospace chrome moly steel. Moreover, the shaft diameter is a larger diameter than the OEM unit. These features combine to enable ARP shafts to handle the added torque requirements of increased capacity oil pumps or heavy viscosity lubricants.
Product Features:
See More
Product Features:
- Extra Heavy Duty Shaft That Will Provide The Necessary Reliability
- Enable Shafts To Handle The Added Torque Requirements Of Increased Capacity Oil Pumps Or Heavy Viscosity Lubricants
- Made From Premium Grade 8740 And Heat Treated To 190,000 Psi
- Alignment Sleeve Is Roll Formed Onto The Shaft (Not Welded Or Pinned), Enabling The Sleeve To Float, Allowing For Slight Misalignment
- Black Oxide
Sealed Power – Engine Assembly Lubricant (Part No.55-400)
from
$10.49
Sealed Power parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Formulated for pre-lubrication cam lobes, lifters & engine bearings
- Increases load carrying capacity
- Holds fast to surfaces
- Exacting tolerances
- Meets or exceeds OEM specifications
- 4.0 oz. Squeeze Container
National – Engine Harmonic Balancer Kit (Part No.5000)
from
$28.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Includes timing cover seal and harmonic balancer sleeve
- Solves the oil leaking around timing cover seal
- Made of stainless steel
- Takes up gaps caused by worn-out harmonic balancer shafts
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 5112)
from
$16.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Specialized gasket set called R.A.C.E. or Remainder to Assemble Complete Engine
- Includes rear main seal, timing cover gasket and seals and fuel pump gaskets
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)
from
$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Felpro – Engine Valve Cover Load Spreader Set (Part No.ES 72676)
from
$34.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)
from
$18.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Made of stainless steel
- Designed to prevent timing cover seal leaks
- Takes up gaps caused by worn-out harmonic balancer shafts
Edelbrock – Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome (Part No.4860)
from
$34.99
Edelbrock part #4860 S/B Chevy Chrome Timing Cover (with Welded Reinforcement Plate) This stamped steel timing covers for small-block Chevrolet has a reinforcement plate welded to the inside of the cover for added strength. This timing cover is ideal for
Product Features:
See More
Product Features:
- Stamped Steel Material
- Comes W/ Front Crankshaft Seal Installed
- W/ Welded Reinforcement Plate
- Chrome Finish
- Ideal For Preventing Camshaft Walk When Used W/ Thrust Button
Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)
ARP Auto Racing – For Use Wit 2003 And Earlier Gen Iii/Ls Series Smal Block, Hex Head, Chrome Moly (Part No.134-3609)
from
$272.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.
Product Features:
See More
Product Features:
- High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
- Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
- Rated At 180,000 Psi Tensile Strength
- High Performance Head Bolts Are Stronger
Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)
from
$191.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Size: 3/4 in. x 10 in. x 12-1/4 in.
- Medium duty applications
- All except Chevrolet V8 applications
- Two-pass design for increased cooling
- Size: 3/4 in. x 10 in. x 12-1/4 in.
- Medium duty applications
- All except Chevrolet V8 applications
- Two-pass design for increased cooling
National – Shaft Repair Sleeve (Part No.99176)
from
$46.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Felpro – Fuel Pump Bowl Gasket (Part No.773)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Rubber Expansion Plug 1-3/8" – Size Range 1-3/8" – 1-1/2" (Sold by each) (Part No.570-008)
from
$18.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Sealed Power – Engine Piston Ring Set (Part No.E-240K 30)
from
$102.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Face of top rings coated with latest generation Plasma-Moly
- Decreases friction
- Very resistant to scuffing
- Exacting tolerances
- Meets or exceeds OEM specifications
ARP Auto Racing – For Use With Chevy Small Block With Standard 2 Piece Cork Gasket (Part No.234-1802)
from
$40.99
The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.
Product Features:
See More
Product Features:
- Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
- Bolt Kits Come With Washers
- Stud Kits Come Complete With A Special Locking
- Easily Installed Without The Worry Of Cross-Threading
Mr. Gasket – Oil Dipstick And Tube (Part No.6235)
from
$18.79
Mr. Gasket Oil Dipstick is similar in design to original equipment, it can be installed with simple hand tools.
Product Features:
See More
Product Features:
- Fits Chevy Small Block 1955-79 283-400 CID
- Block Mounted
- Chrome Plated Steel
Holley – Valve Covers – Muscle Series – Finned – SBC – Factory Orange (Part No.241-136)
from
$478.99
Product Features:
See More
- Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
- Die-Cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and oil leaks
- Standard height valve cover with pre-installed internal oil baffles
- Factory style twist-in oil fill cap, round Holley emblem, and square oil fill and PCV grommets included
- Available in four finishes to best suit your custom build: natural, polished, gloss black, factory orange
Dorman – Rubber Expansion Plug 7/8 In. – Size Range 7/8 In. – 1 In. (sold by each) (Part No.570-004)
from
$11.99
This engine intake manifold expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine intake manifold expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Edelbrock – Small-Block Chevy E-Series Cylinder Head E-210 Hydraulic Roller Cam (Part No.5087)
from
$1655.00
The Edelbrock #5087 E-210 Cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased ai
Product Features:
See More
Product Features:
- Complete Pair For Mechanical Flat Tappet
- 64cc Combustion Chamber Volume
- 210cc Intake/75cc Exhaust Runner Volume
- 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.562 in. Deck Thickness
Edelbrock – Small-Block Chevy E-Street Cylinder Head 70cc Pair (Part No.5073)
from
$1332.99
The Edelbrock #5073 E-Street cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and
Product Features:
See More
Product Features:
- Complete Pair For Hydraulic Flat Tappet
- 70cc Combustion Chamber Volume
- 2.02cc Intake/60cc Exhaust Runner Volume
- 2.02 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.562 in. Deck Thickness
Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)
from
$2.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
MAHLE Original – Fuel Pump Gasket (Part No.D27094)
from
$1.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Felpro – Engine Oil Pan Gasket Set – Blue Stripe cork-rubber (Part No.OS 6412 C)
from
$14.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
- SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
GMC 280-22 Engine Parts Categories
Helping You Find the Right Engine Parts for Your GMC 280-22
You love your 280-22. So we’ve made it easier than ever to help you find GMC 280-22 Engine Parts in our online catalog. Our inventory holds 82 aftermarket and OEM Engine Parts for your GMC 280-22, ranging from $0.43 to $1,886.00.
We offer parts from 14 brands trusted to make quality Engine Parts for your GMC 280-22. Before you buy, take some time to read through customer reviews. We currently have 204 reviews of GMC 280-22 Engine Parts from previous customers. Some of the top rated parts include Econo-Kool® Engine Oil Cooler with 4.7 stars and Engine Valve Spring Retainer Keeper with 5.0 stars.
Find your 280-22 Engine Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC 280-22 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Engine Parts Brands for Your GMC 280-22
Our inventory holds Engine Parts for your GMC 280-22 from 14 trusted brands. You’ll find OEM and aftermarket parts from brands like National, Felpro, and Mr. Gasket, all of which can keep that GMC happy.
We have Dorman parts available for your GMC 280-22 in categories like Freeze and Expansion Plugs. Some of the top-rated Dorman parts in these categories are:
from
$18.99
(2)
Rubber Expansion Plug 1-3/8" – Size Range 1-3/8" – 1-1/2" (Sold by each)
Rubber Freeze Plugs
Top-Rated National Engine Parts
Leading National Engine Parts
We carry National brand parts for your GMC 280-22 across several catalog categories, including Engine Internals and Engine Timing Parts. Some of our most reviewed National parts include:
FAQs for GMC 280-22 Engine Parts
What are the most purchased Engine Parts for the GMC 280-22?
Out of 82 Engine Parts for the GMC 280-22, the most popular in our inventory are:
from
$8.99
This product is not rated
Rubber Expansion Plug 1-7/8 In. – Size Range 1-7/8 In. – 2 In.
Rubber Freeze Plugs
What are the top-rated GMC 280-22 Engine Parts?
Top-rated Engine Parts for your GMC 280-22 based on customer reviews/ratings are:
from
$122.99
(3)
Econo-Kool® Engine Oil Cooler
“Good price perfect fit had all the parts I needed good quality”
