GMC 150 Hood Pins

Flowmaster’s Flow FX Cat-back exhaust system for the 2024 to 2026 GM 1500 trucks with the 6.2-liter engine is a great way to customize your Silverado or Sierra to your personality. This performance exhaust system fits both 2/4 Wheel drive models and is manufactured from 409 stainless steel for years of trouble-free service and performance. Features include a 3.50-inch inlet pipe leading into a specialty tuned Flow FX style muffler for great sound and maximum performance. This cat-back system has dual 2.5-inch mandrel-bent tailpipes that exit in the bumper cut-out locations and retains the factory exhaust bezel for a clean look. Included in this cat-back system is active valve control with an integrated turndown. This allows you to control the factory valve from the dash with the different drive modes for full control of your sound level. Run the valve closed in the Normal drive mode, or open the valve in Sport or Off-Road mode for maximum sound. Max dyno gains of 15 hp and 13 lb-ft at the rear wheels deliver power you can feel. These systems use all the factory hanger locations and connections for an easy installation that you can do at home. Kit include installation instructions and all necessary hardware. Backed by Flowmaster’s Limited Warranty.

This Flowmaster American Thunder cat-back exhaust system for the 2019-2026 Chevrolet/GMC Silverado/Sierra with the 2.7-liter engine is manufactured using durable 409 stainless steel throughout and features dual 2.50-inch mandrel bent pipes for better exhaust gas flow, and an American Thunder muffler is used for a moderate sound level and maximum performance. Gain up to 4 hp and 11 lbs-ft of torque at the rear wheels over stock. This system exits dual out the rear or dual out the side, with dual 3.50-inch polished tips for added style and a custom look. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Backed by Flowmaster’s Limited Warranty.

This Flowmaster American Thunder Cat-back exhaust system is perfect for the person looking for deep, powerful sound outside the vehicle with a little growl inside the cab. This emissions-legal system is for 2WD & 4WD 2019-2026 GM 1500 trucks (new body style) with the 5.3L engine and factory single exhaust. System features include full stainless steel construction, a single in/dual outlet Super 40 Series muffler and mandrel-bent dual 2.50-inch stainless steel tailpipes for maximum performance and a deep sound. Maximum dyno gains of 21 hp and 23 lb.ft. at the rear wheels. This bolt-on system utilizes the factory hanger locations and includes your choice of tailpipe exits, either dual out the rear exiting under the bumper, or dual out the side behind the rear wheels to help prevent blowing exhaust on your boat or trailer when towing. The system is finished off with a pair of large 3.50-inch double wall polished 304 stainless steel tips. Designed for a perfect fit, the system includes installation instructions and all the necessary hardware for an easy at home installation. Note: Fits 2/4 wheel drive Crew cab and double cab models.

Our American Thunder cat-back exhaust system for 2007-2013 GM Silverado/Sierra 1500 with the 5.3L engine, is perfect for the person looking for moderately aggressive sound levels both inside and outside of the truck. This bolt-on emissions-legal system features 3.00-inch mandrel-bent stainless steel tubing flowing into a Super 40 Series muffler, for a deep powerful sound. The mandrel-bent 2.50-inch stainless steel tailpipes can be configured with your choice of exit locations, either straight out the back under the bumper for a muscular look, or exiting out behind the rear tires on each side of the truck. This is the ideal tailpipe location when towing a boat or RV. The tailpipes are finished off with large 3.50-inch double wall polished stainless steel tips. The system includes all necessary parts and hardware for an easy installation and is covered by our Limited Warranty. Notes: Fits all 2/4 wheel drives with 143.5 and 157.5-inch wheelbases. Also fits 2007-2008 GM Silverado/Sierra 1500 with 4.8L engines and 143.5 and 157.5-inch wheelbases.

This Flowmaster Flow FX cat-back exhaust system for the 2011-2019 GM 2500HD/3500HD trucks with the 6.0-liter engine is manufactured using durable 409 stainless steel throughout and features 3.50 to 3.00-inch mandrel bent pipes for better exhaust gas flow. This system exits with dual 4.00-inch black stainless steel tips for added style and a custom look. Max gains of 10 hp and 10 lb-ft of torque at the rear wheels over stock. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Fits extended cab or crew cab models with the 6.5 foot bed only. Backed by Flowmaster’s Limited Warranty.

“This Flowmaster Flow FX cat-back exhaust system is for the 2023-2026 GM Colorado/Canyon with the 2.7-liter turbo engine. This system is manufactured using durable 409 stainless steel tubing and features 3.00-inch to dual 2.5-inch mandrel bent pipes for better exhaust gas flow. A Flow FX “”straight-through”” muffler is used for an aggressive to moderate sound level and maximum performance. Maximum increases on the dyno revealed 14 hp and 15 lb-ft at the rear wheels. This system exits out the side of the truck in front of the rear tire with dual 4.00-inch black ceramic coated tips for added style. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Backed by Flowmaster’s Limited Warranty.”

This American Thunder exhaust system was specially designed for 1973-1974 Chevrolet and GMC C10 and C15 1/2 ton and 3/4 ton 2wd trucks and is perfect for the person looking for moderate to aggressive interior and exterior sound levels. The Crossmember-Back exhaust system comes complete with a built-in H-pipe crossover, all mandrel-bent 2.50-inch aluminized steel tubing, a pair of Super 44 Series performance mufflers and your choice of tailpipe exits. Either dual out rear under the bumper for a muscular look or dual out the sides behind the rear tires for that classic truck look. The system includes all hardware necessary for installation and is designed to accommodate both long and short wheelbases, with either an automatic or manual transmission and provides adequate clearance for substantially lowered vehicles. The exhaust system is covered by our 3-year Limited Warranty. Notes: Does Not include exhaust tips, header reducer cones or downpipes for factory manifolds.

“This Flowmaster Flow FX cat-back exhaust system is for the 2023-2026 GM Colorado/Canyon with the 2.7-liter turbo engine. This system is manufactured using durable 409 stainless steel tubing and features single 3.00-inch mandrel bent pipes for better exhaust gas flow. A Flow FX “”straight-through”” muffler is used for an aggressive to moderate sound level and maximum performance. Maximum increases on the dyno revealed 14 hp and 15 lb-ft at the rear wheels. This system exits out the rear of the truck high up under the bumper for the best ground clearance possible. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Backed by Flowmaster’s Limited Warranty.”

This Flowmaster Outlaw cat-back exhaust system is for the 1996-1999 GM 1500 trucks with the 5.7-liter engine. This system is manufactured using durable 409 stainless steel tubing and is mandrel bent for better exhaust gas flow. A Super 10 Series muffler is used for an improved sound level and maximum performance. This system uses dual 4.5-inch black ceramic coated tips that can exit dual out the rear or dual out the side. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. This system fits all single cab and extended cab models in both 2 and 4 wheel drive. Backed by Flowmaster’s Limited Warranty.

This Flowmaster Flow FX cat-back exhaust system is for the 1994-1995 GM 1500/2500 LD trucks with the 5.0 and 5.7-liter engines. This system is manufactured using durable 409 stainless steel tubing and is mandrel bent for better exhaust gas flow. A Flow FX Series muffler is used for an improved sound level and maximum performance. This system uses dual 4.5-inch black ceramic coated tips that exit dual out the side of the truck. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. This system fits all single cab and extended cab models in both 2 and 4 wheel drive. Backed by Flowmaster’s Limited Warranty.

“Our new Flow FX cat-back exhaust system for 2009-2013 GM Silverado/Sierra 1500 with 5.3L engines is manufactured using durable 409 stainless steel throughout and features a 3.00-inch inlet pipe leading to a single inlet/dual outlet Flow FX “”straight-through”” muffler for great sound and maximum performance. The dual 2.50-inch mandrel-bent tailpipes exit out the side at an angle behind the rear wheels directing exhaust away from your boat or travel trailer when towing. The system is finished off with a pair of large 4.50-inch diameter black ceramic coated 304S stainless steel tips, giving your truck a custom look that goes hand in hand with that deep performance Flow FX sound. The system uses all the existing factory hanger locations and includes an additional hanger to install the new left side tailpipe. Includes installation instructions and all necessary hardware for an easy installation that you can do at home. Notes: Fits 2wd/4wd models with 143.5 and 157.5-inch wheelbases only.”

“This Flowmaster Flow FX cat-back exhaust system for the 2011-2018 GM 1500 trucks with the 6.2-liter V8 engine is manufactured using durable 409 stainless steel throughout and features single 3.50-inch to dual 2.50-inch mandrel bent pipes for better exhaust gas flow, and a Flow FX “”straight-through”” muffler is used for a moderate sound level and maximum performance. Maximum increases on the dyno revealed +11 hp and +15 lb-ft at the rear wheels. This system exits out both sides, behind the rear wheels with 4.50-inch black ceramic tips for added style and a custom look. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Backed by Flowmaster’s Limited Warranty.”

This American Thunder exhaust system is specifically designed for 1963-1966 Chevrolet C10 and GMC 1000 series 2-wheel drive, non X-Frame V8 trucks without the torsion bar front suspension. The system is perfect for the person looking for an aggressive to moderate exterior and interior sound level. Starting just after factory manifold downpipes or a set of headers, this exhaust system comes complete with a built-in H-pipe crossover and all mandrel bent 2.50-inch 409 stainless steel tubing that helps maximize the flow of the exhaust pulses for better performance and the added durability of stainless steel. The Super 44 Series performance mufflers will give any V8 a deep rumble with that classic Flowmaster tone. This system comes with your choice of three tailpipe exits, straight out the rear, side exit behind each rear tire, or dumped behind the rear tires. The system includes all hardware necessary for an at home installation. This exhaust system is covered by our Limited Warranty. Fits both short and long wheelbase trucks.

“The new Flowmaster Flow FX cat-back exhaust system for the 2011-2019 GM Silverado/Sierra 2500/3500 HD trucks with the 6.0-liter engine is manufactured using durable 409 stainless steel throughout and features 3.50-inch mandrel bent pipes for better exhaust gas flow, and a Flow FX “”straight-through”” muffler is used for a moderate sound level and maximum performance. Maximum increases on the dyno revealed +21 hp and +23 lb-ft at the rear wheels. This system exits out the side, behind the rear wheel with a 5.00-inch black ceramic tip for added style and a custom look. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. This exhaust system was designed for Crew Cab Short Bed trucks with the 6.5-foot bed and is backed by Flowmaster’s Limited Warranty.”

“This Flowmaster Flow FX cat-back exhaust system for the 2019-2023 GM Silverado/Sierra 1500 trucks with the 6.2L engine and factory dual exhaust, is manufactured using durable 409 stainless steel throughout and features 3.5-inch to dual 2.50-inch mandrel bent pipes for better exhaust gas flow, and a Flow FX “”straight-through”” muffler is used for a moderate sound level and maximum performance. Maximum increases on the dyno revealed +26 hp and +39 lb.ft at the rear wheels. This system fits all wheelbases and connects to the factory exhaust tips that exit in the rear bumper for a stealthy look. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Backed by Flowmaster’s Limited Warranty.”

“Introducing our new Flow FX Cat-back exhaust system for the 2019-2026 GM Silverado/Sierra 1500 with the 5.3L engine. The performance exhaust system fits both 2 and 4-Wheel drive models with 148 or 157-inch wheelbases and is manufactured from 409S stainless steel for years of trouble-free service. Features include a 3.00-inch inlet pipe leading into a Flow FX “”straight-through”” muffler for great sound and maximum performance. Maximum dyno gains of 10 hp and 12 lb.ft of torque at the rear wheels. The 3.00-inch mandrel-bent tailpipe exits out behind the rear passenger side tire and is finished off with large 4.50-inch diameter black ceramic coated 304S stainless steel tip, giving your Silverado/Sierra that custom look that goes hand in hand with the deep performance sound of the Flow FX muffler. The system uses all the factory hanger locations and connections for an easy installation that you can do at home. Includes detailed instructions and all necessary hardware.”

Flowmaster introduces our Force II stainless steel cat-back exhaust system for the 2021-2026 GM Tahoe/Yukon with the 5.3-liter engine. This system uses the Super 40 series muffler for a moderate to mild sound level and increased performance. Mandrel bent 3.00-inch 409 stainless steel tubing allows for maximum exhaust flow and durability. The system uses a larger 3.50-inch polished stainless steel tip for a custom look. This system also has a tuned resonator to control interior sound and maintain driving comfort. Max dyno gains of 6 hp and 7 lb-ft at the rear wheels over stock. All of the necessary hardware is included, and factory-mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

Competition Cams Ultra-Gold Arc Rocker Set With 1.72 Ratio For Pedestal Mount Gm Ls3/L92, 19028-16.

This Flowmaster Flow FX cat-back exhaust system is for the 1996-1999 GM 1500 trucks with the 5.7-liter engine. This system is manufactured using durable 409 stainless steel tubing and is mandrel bent for better exhaust gas flow. A Flow FX Series muffler is used for an improved sound level and maximum performance. This system uses dual 4.0-inch black ceramic coated tips that exit on the passenger side of the truck, just in front of the rear wheel. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. This system fits all single cab and extended cab models in both 2 and 4 wheel drive. Backed by Flowmaster’s Limited Warranty.

“Our new Flowmaster Flow FX cat-back exhaust system for the 2009-2013 GM Silverado/Sierra with 4.8L and 5.3L engines is manufactured using 409S stainless steel for years of trouble free service. System features include a 3.00-inch inlet pipe leading into a Flow FX “”straight-through”” performance muffler for great sound and maximum performance. The single 3.00-inch mandrel-bent tailpipe exits out the side behind the passenger side rear tire and is finished off with large 4.50 inch diameter black ceramic coated 304S stainless steel tip, giving your Silverado or Sierra that custom look that goes hand in hand with the deep performance sound of the Flow FX muffler. The system uses all the factory hanger locations and connections without any cutting or welding for an easy installation that you can do at home. Includes installation instructions and all necessary hardware. Note: Fits both 2/4 Wheel Drive models with 143.5 and 157.5-inch Wheelbases.”

This Flowmaster Flow FX cat-back exhaust system for the 2015-2020 Chevrolet Tahoe and GMC Yukon with the 5.3-liter engine is manufactured using durable 409 stainless steel throughout and features 3.00-inch to dual 2.50-inch mandrel bent pipes for better exhaust gas flow. This system exits out the side with dual 3.50-inch black stainless steel tips for added style and a custom look. Max dyno gains of 7 hp and 7 lb-ft of torque over stock at the rear wheels. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Backed by Flowmaster’s Limited Warranty.

Flowmaster introduces our Flow FX Extreme stainless steel cat-back exhaust system for the 2014-2019 Chevrolet/GMC Silverado/Sierra 1500 with the 4.3 or 5.3-liter engine. This system uses a Flow FX series muffler for an aggressive to moderate sound level and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing allows for maximum exhaust flow and durability. The system has a turndown style, dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps improve ground clearance and departure angle when you are driving in more extreme off-road situations. This system produced max dyno gains of 11 hp and 15 lb-ft at the rear wheels. All of the necessary hardware is included, and factory-mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

Hooker BlackHeart application-specific LS/LT swap engine mounting brackets eliminate the installation guesswork and compatibility uncertainty that comes with using universal swap plate mounting methods. These mounting brackets are available with forward-bias, or rearward-bias engine mounting positions that optimize powertrain placement based on user-selected transmission, transfer case and driveshaft compatibility/retention priorities.

These new premium engine mounting brackets have been redesigned to allow GM LS or Gen-V LT engines to be installed in the 1973-1987 C10/C20 Trucks. The modular design of these brackets allow engine changes from LS to LT with a change to the clamshell components only. The same mounting brackets, polyurethane inserts, and cross members fit both LS & LT engines.

These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit out the sides behind the rear wheels. Designed to be used with a Single Inlet/Dual 2.50-inch Outlet mufflers such as part 9430452 (Super 44 Series) or 530552 (Super 50 Series) muffler. Covered by our 3-year Limited Warranty. Note: Some fitment may be necessary. Does Not include installation hardware or exhaust tips.