Freightliner Sprinter 2500 Ignition and Tune-Up Products

CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:

• Provides excellent heat resistance as well as maximum protection against spark loss.
• Durable silicone compound for resistance to high heat or abrasion
• Spring included with the coil boot
• Design for direct compatibility
• OE design provides an exact fit for your application
• Multipack provides one time replace all COP for better deal

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Built by IATF 16949 certified manufacturers for consistent durability
• Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
• Segmented secondary bobbins to distribute high voltage and prevent shorting
• Extensive design validation testing to ensure long-lasting reliability
• 100% end-of-line tested to ensure proper performance
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Delphi ignition coils feature precise spark timing response for increased fuel economy and faster crank-to-run. The ignition coils provide accurate electrical energy to create a voltage potential at the spark plug, providing for superior engine performance that adjusts to driving and environment conditions. Plus, like all Delphi ignition system components, they enable engine management systems to maintain tighter control over emissions, economy and performance.

Product Features:

• Improved dwell accuracy decreases module and coil temperatures for greater reliability
• Noise abatement material between laminations reduces audible coil noise
• Cassettes have improved primary connector for greater ease of assembly compared to designs with one connector for each coil
• Lower primary inductance provides high-speed performance
• Early and precise electronic spark timing helps improve fuel economy and provides faster crank-to-run
• Higher energy delivered to combustible mixture provides cleaner combustion to help manufacturers meet on-board diagnostics (OBD II) requirements
• Direct connection to spark plugs (via small boot) eliminates spark plug wires
• Composite iron coils provide programmable energy
• Coil per cylinder dwell overlap electronics deliver better high speed performance and better heat dissipation compared to some conventional technologies
• Coil per cylinder ramp and fire electronics decrease power dissipation and increase efficiency
• Radio frequency interference (RFI)suppressor optional

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:

• OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
• OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
• EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
• THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
• EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
• PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

NGK metal glow plugs are trusted by OEM diesel engine manufacturers around the world to perform under the harshest conditions. NGK metal glow plugs are equipped with a heating coil in a glow rod made of heat-resistant magnesium oxide between the heating and regulating coils. Magnesium oxide is an outstanding thermal conductor (quickly dissipating heat), while protecting the heating coils from vibration and shock. NGK metal glow plugs feature excellent gas-tight sealing qualities that deliver superior electrical insulation and protection against combustion gas. NGKs metal composition helps reduce carbon accumulation to prevent short circuits, while the unique shell design provides excellent heat transfer.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction metal glow plug
• SUPERIOR DURABILITY: Metal glow plugs are designed to withstand thermal shock due to quick changes in temperature
• FAST HEATING PERFORMANCE: Fast heat up enables smooth engine starts even in extreme weather conditions
• CLEAN PERFORMANCE: Constant afterglow temperature minimize noxious pollutants
• RECOMMENDED USAGE: Best for diesel engines with OE metal glow plugs

The new ceramic high-temperature glow plug (NHTC glow plug, New High Temperature Ceramic) has a fully ceramic heating element. It reaches an operating temperature of 1000C in two seconds and can afterglow for up to ten minutes at temperatures up to 1350C. That means: It glows in push phases or during the regeneration phase of the particle filter and thereby minimizes the particle emissions during this time. The NHTC ceramic glow plug was specially developed by NGK to enable automobile manufacturers to comply with the Euro 4 and Euro 5 emissions standards. One of the goals of these standards is to reduce the compression ratio in diesel engines. NHTC glow plugs reach a temperature of 1,000C in less than two seconds and can after-glow for more than ten minutes at temperatures of up to 1,350C. Optimal combustion is assured even with low compression ratios. In addition, the NHTC glow plug can glow intermediately to prevent cooling of the particle filter in deceleration phases. Ceramic glow plugs from NGK guarantee a long service life and ensure a reliable and fast ignition, even at the lowest outside temperatures. At the same time, they reduce harmful emissions.

Bosch Duraterm Glow Plug Technology With a long history of diesel fuel injection expertise and innovation, Bosch leads the way in glow plug technology with its patented Duraterm dual-control coil design. This technology utilizes a self-regulating system that reduces glow wait time by more than 50%. The patented dual control regulating and heating coil system effectively directs current draw, enabling the glow plug to reach higher temperatures more quickly for faster engine start-up. For vehicles with a post-glow control system, this advanced technology results in a post-glow heating phase which allows for more efficient overall engine performance.

Product Features:

• Glow plug reaches higher temperatures more quickly for fast engine start-up
• Regulating coil controls current draw for rapid heat-up of heating coil
• Heating coil provides rapid heat-up of the glow tube and quick start-up
• Glow tube material resists corrosion and vibration for long service life
• Fine-grained ceramic insulating powder provides superior electrical insulation and high thermal conductivity
• Twin Viton seals protect coils from exhaust gas damage for long life
• Connectors designed to OE specifications precise fit and easy installation

Starting a diesel engine? Check out Autolite glow plugs. They’re dependable and long-lasting, the perfect plug for a variety of diesel applications.

Product Features:

• Diesel engines depend on high heat in the combustion chamber to ignite the fuel. When you cold start a diesel engine, there isn’t enough heat to ignite. Glow plug warms the combustion chamber to start the fuel ignition.
• These glow plugs fit a variety of diesel applications. If you’re experiencing problems starting your diesel engine, it may have burnt out glow plugs.
• Reaches temperatures hot enough to start in 30 seconds or less
• For dependability and long-lasting performance, use Autolite glow plugs

The Beru Electronic Glow Plug Control Unit is an OE-recommended replacement and will provide the same performance, durability, and service life as your factory original equipment.

Product Features:

• Extremely short heating up time (up to 1,100C in 2 seconds!)
• Safe start even at temperatures of -25C
• Electronically controlled pre-heating, intermediate and post-heating
• Immediate stable idling and clean load assumption
• Minimized emission of pollutants and fuel consumption in the warm-up phase
• Specially designed for diesel engines with direct injection
• On board diagnosis compatible
• Meets the latest requirements of the strict EURO pollution standard

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:

• Works to optimize engine performance for a longer life and improved fuel economy
• OE design
• Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
• Platinum ball welding process provides a consistent point of contact for enhanced adhesion

NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:

• SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
• PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
• TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
• RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs

NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug; Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.

Product Features:

• HIGH IGNITABILITY PROJECTED SQUARE PLATINUM ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with a unique cut-back PSPE ground electrode
• RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
• PSPE DESIGN: Projected square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• RECOMMENDED USAGE: Modern vehicles using OE PSPE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
• Enhanced Fuel Burn: Provides a more complete fuel burn, resulting in quicker throttle response, smoother idle, and better cold starts.
• Industry-Leading Durability: Ruthenium center electrode ensures exceptional durability and longevity.

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

• SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
• IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
• TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
• Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhanced fuel efficiency, making them ideal for performance enthusiasts.
• Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and anti-fouling properties, ensuring reliable performance and longevity.

NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applica

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
• PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
• PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs

NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:

• PREMIUM GRADE SILICONE: Designed to withstand harsh environments
• OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.