Freightliner FLA086 FLA08642S Belts and Hoses
Top Freightliner FLA086 FLA08642S Belts and Hoses Categories
We carry over 108 Belts and Hoses in inventory for the Freightliner FLA086 FLA08642S. If you’re looking for aftermarket Belts and Hoses for your Freightliner FLA086 FLA08642S, check out all these categories:
Essential Freightliner FLA086 FLA08642S Belts and Hoses
Gates – Premium Molded Coolant Hose (Part No.21488)
from
$32.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-formed for a good fit and to ensure perfectly sealed connections
- EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
- Warning: Do not use for fuel or oil transfer applications
Dayco – Straight Radiator Hoses; EPDM Rubber, 2 3/4 Inch Inner Diameter (sold by inch) (Part No.76275)
from
$2.49
The Dayco Straight Radiator Hose is designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- PLEASE NOTE: Priced and sold by inch. See store for details.
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26510)
from
$33.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- The steel wire spiral allows them to take on multiple shapes without bending or crushing
- EPDM tubing and neoprene lid for extended life
- Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
- Heat, oil and ozone resistant
- Meets SAE 20R5 Type EC Class D-2 specifications
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Warning: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9605HD)
from
$38.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at extremely prolonged operating temperatures
- Crack, wear, oil, and heat resistant construction
- The special compound provides unprecedented flexibility, stability, load-bearing capacity and belt life.
- Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
- Troubleshooter for troubled drives
- Engineered to save your fleet money and reduce downtime
- Meets RMA oil and heat resistance standards and static conductivity requirements
Gates – Automotive XL High Capacity V-Belt (Part No.9451)
from
$24.29
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally active pull cords for maintenance-free operation when the strap is properly installed and tensioned
- Resists oil, heat, ozone, weather, and decay to improve belt life
- Meets or exceeds SAE J636C specifications
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9610HD)
from
$43.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at extremely prolonged operating temperatures
- Heavy-duty construction resists cracking, wear, oil and heat
- A special compound ensures unmatched stability, load capacity and belt life.
- Unique notch pattern offers greater flexibility for smaller diameter pulleys
- Problem solver for troubled drives
- Designed to save your fleet money and reduce downtime
- Meets RMA oil and heat resistant standards and static conductivity requirements
Dayco – Straight Heater Hose; EPDM Rubber, 1 Inch Diameter (sold by foot) (Part No.80319)
from
$4.99
This premium Dayco Insulone Heater Hose delivers heated coolant to the heater core with minimal heat loss. The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives. A special compound used in the insulating layer provides an added measure of protection against heat loss. Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Synthetic EPDM rubber compounds and spiral reinforcement provides excellent burst strength and heat resistance
- Compatible with all common coolants and coolant additives
- Insulating layer provides an added measure of protection against heat loss
- Performs well in temperature ranges of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Dayco – Straight Radiator Hoses; EPDM Rubber, 1 3/4 Inch Inner Diameter (sold by inch) (Part No.76175)
from
$1.29
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Straight Coolant Hose, Standard, I.D. 2" (sold by inch) (Part No.76200)
from
$1.79
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Priced and sold by inch. See store for details.
Dayco – Straight Radiator Hoses; EPDM Rubber, 2 1/2 Inch Inner Diameter (sold by inch) (Part No.76250)
from
$1.79
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Priced and sold by inch. See store for details.
Driveworks – Poly Rib Belt Serpentine Belt; 35.04 Long, 5 Rib Count (Part No.350K5)
from
$15.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Gates – Micro-V Serpentine Drive Belt (Part No.K060425)
from
$24.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Replacement of the tensioner is recommended (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Gates – Micro-V Serpentine Drive Belt (Part No.K080585)
from
$60.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all OEM specifications
- It is recommended to replace the tensioner (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Dayco – Poly Rib Belt Serpentine Belt; 42.52 Long, 6 Rib Count (Part No.5060425)
from
$25.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080570HD)
from
$87.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- The patented material provides optimal performance at prolonged extreme operating temperatures.
- Crack and wear resistant construction, even in extreme temperatures
- Special compound provides unmatched flexibility, stability, load capacity and belt life
- A problem-solving tool designed for the toughest applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Designed to save your fleet’s money and reduce downtime
- Replacement of the tensioner is recommended (if equipped)
Dayco – Poly Rib Belt HD Serpentine Belt; 73.5 Long, 8 Rib Count, Heavy Duty (Part No.5080735)
from
$64.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.
Product Features:
See More
Product Features:
- Engineered to handle operating conditions with temperatures up to 130°C (266°F)
- Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
- Capable of delivering excellent performance in high torque and high power pulse applications
- Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080733HD)
from
$100.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides maximum performance at extreme, extended operating temperatures
- Construction resists cracking and wear, even at extreme temperatures
- Special compound provides unmatched flexibility, stability, load capacity and belt life
- A problem-solving tool designed for the toughest applications
- Consistently outperforms other heavy-duty coil belts on the market
- Engineered to save your fleet money and reduce downtime
- Replacement of the tensioner is recommended (if equipped)
Dayco – Poly Rib Belt Serpentine Belt; 43.6 Long, 6 Rib Count (Part No.5060436)
from
$33.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Gates – Micro-V Serpentine Drive Belt (Part No.K080751)
from
$49.99
We are proud to offer this CARQUEST product line: CARQUEST Premium Serpentine Belts By Gates
Product Features:
See More
Product Features:
- The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all original equipment manufacturer specifications.
- It is recommended to replace the tensioner (if equipped)
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080585HD)
from
$75.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Construction resists cracking and wear, even at extreme temperatures
- Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
- A problem-solving tool designed for the toughest applications
- Consistently outperforms other heavy-duty coil belts on the market
- Designed to save your fleet money and reduce downtime
- It is recommended to replace the tensioner (if equipped)
Gates – Micro-V Serpentine Drive Belt (Part No.K080740)
from
$68.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- The special belt construction eliminates noise, reduces tension loss and solves transmission problems.
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all original equipment manufacturer specifications.
- It is recommended to replace the tensioner (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080690HD)
from
$92.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Construction resists cracking and wear, even at extreme temperatures
- Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
- Troubleshooting designed for the toughest applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Engineered to save your fleet money and reduce downtime
- Replacement of the tensioner is recommended (if equipped)
Gates – Micro-V Serpentine Drive Belt (Part No.K080570)
from
$66.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
- EPDM rubber constructions resist cracking on the surface of the ribs
- Meets or exceeds all OEM specifications
- It is recommended to replace the tensioner (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Driveworks – Poly Rib Belt Serpentine Belt; 43.6 Long, 6 Rib Count (Part No.436K6)
from
$21.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Gates – Micro-V Serpentine Drive Belt (Part No.K050350)
from
$23.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- The special belt construction eliminates belt noise, reduces tension loss, and solves problems in drive applications.
- EPDM rubber constructions resist cracking on the surface of the ribs
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- It is recommended to replace the tensioner (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Freightliner FLA086 FLA08642S Belts and Hoses Categories
Helping You Find the Right Belts and Hoses for Your Freightliner FLA086 FLA08642S
You love your FLA086 FLA08642S. So we’ve made it easier than ever to help you find Freightliner FLA086 FLA08642S Belts and Hoses in our online catalog. Our inventory holds 108 aftermarket and OEM Belts and Hoses for your Freightliner FLA086 FLA08642S, ranging from $1.29 to $114.99.
We offer parts from 4 brands trusted to make quality Belts and Hoses for your Freightliner FLA086 FLA08642S. Before you buy, take some time to read through customer reviews. We currently have 238 reviews of Freightliner FLA086 FLA08642S Belts and Hoses from previous customers. Some of the top rated parts include Poly Rib Belt Serpentine Belt; 43 Long, 4 Rib Count with 3.0 stars and Automotive V-Belt, Driveworks with 5.0 stars.
Find your FLA086 FLA08642S Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Freightliner FLA086 FLA08642S part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Belts and Hoses Brands for Your Freightliner FLA086 FLA08642S
Our inventory holds Belts and Hoses for your Freightliner FLA086 FLA08642S from 4 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, DriveWorks, and Gates, all of which can keep that Freightliner happy.
We have Dayco parts available for your Freightliner FLA086 FLA08642S in categories like Serpentine and V Belts. Some of the top-rated Dayco parts in these categories are:
from
$64.99
(1)
Poly Rib Belt HD Serpentine Belt; 73.5 Long, 8 Rib Count, Heavy Duty
Serpentine Belts
Top-Rated Dayco Belts and Hoses
Leading Dayco Belts and Hoses
We carry Dayco brand parts for your Freightliner FLA086 FLA08642S across several catalog categories, including Serpentine and V Belts. Some of our most reviewed Dayco parts include:
FAQs for Freightliner FLA086 FLA08642S Belts and Hoses
What are the most purchased Belts and Hoses for the Freightliner FLA086 FLA08642S?
Out of 108 Belts and Hoses for the Freightliner FLA086 FLA08642S, the most popular in our inventory are:
from
$25.99
This product is not rated
Poly Rib Belt Serpentine Belt; 42.52 Long, 6 Rib Count
Serpentine Belts
What are the top-rated Freightliner FLA086 FLA08642S Belts and Hoses?
Top-rated Belts and Hoses for your Freightliner FLA086 FLA08642S based on customer reviews/ratings are:
