Fiat 500L Wheels and Tires
Top Fiat 500L Wheels and Tires Categories
We carry over 39 Wheels and Tires in inventory for the Fiat 500L. If you’re looking for aftermarket Wheels and Tires for your Fiat 500L, check out all these categories:
Essential Fiat 500L Wheels and Tires
Carquest Premium – Hub Assembly with Wheel Bearing (Part No.91-540735)
from
$107.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
Autel – Adjustable Angle MX-Sensor 1-Sensor (Rubber) (Part No.300020)
from
$34.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- Combined Frequency – 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99 Percent of OE Sensors
- Maximum Signal Strength / Battery Reliability
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 24 Pack (Part No.33500-24BU)
from
$601.99
Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com. For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- EZ-sensor must be programmed to specific M/M/Y vehicle
- EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
- EZ-sensor can be programmed by most all TPMS programming tools on the Market
- Supports 314.9, 315 and 433 MHz sensor applications
- Always keep your TPMS scan and programming tool up to date with the latest software
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Rubber Valve can be replaced by rubber valve kit 20018 or aluminum valve kit 34000
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
Huf North America – 433MHz OE Qual TPMS SensAlfa, Chrys, Ddge, Fiat,Infnti, Jep, Masrti, Mercds, Ram (Part No.RDE036V21)
from
$47.99
433MHz OE Qual TPMS SensAlfa, Chrys, Ddge, Fiat,Infnti, Jep, Masrti, Mercds, Ram
Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Chrome Plated Valve Stem (Part No.VS-925-C)
from
$9.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, & tools.
Product Features:
See More
Product Features:
- Chrome clamp-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
- 0.453 in. rim hole compatibility
- 200 PSI maximum cold inflation pressure
Huf North America – Rubber – straight in screw (Part No.RDV043)
from
$2.99
Rubber – straight in screw
Autel – MX-Sensor Component Kit (Part No.MXSENSORCK)
from
$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.
Product Features:
See More
Product Features:
- MX-Sensor Components
- 4 Metal Valves
- 4 Rubber Valves
- Rubber Gasket (2×10 pcs)
- Screw Nut (2×10 pcs)
- Washer (2×10 pcs)
- Metal Valve Cap (2X10 pcs)
- Rubber Valve Cap (2X10 pcs)
- Valve Core (2X10 pcs)
Schrader – Direct Fit Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.20398)
from
$58.99
Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: 1 for 1 replacement sensor
- QUICK AND EASY: TPMS sensors are ready out of the box
- VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
- SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
- RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dorman – Dorman Multi-Fit (Dual Freq) Programmable Tire Pressure Monitoring System Sensor (Part No.974-304)
from
$67.99
This dual-frequency Dorman MULTi-FIT TPMS sensor covers 95% of the vehicles on the road today, including European models not covered in many competitors’ TPMS programs. Using our 974-505 MULTi-FIT II tool, the sensor can be programmed for both 315MHz and 433MHz applications on specified vehicles. The MULTi-FIT II tool can precisely and rapidly calibrate this sensor by vehicle specifications or clone it to match the sensor it’s replacing. The versatility, ease of installation and unrivaled range of vehicle coverage makes this sensor the perfect single-source repair solution. Manufactured by a brand known for more than a century for engineering excellence and quality assurance, you can install it with confidence, knowing it’s backed by a warranty you can trust. (MULTi-FIT II tool sold separately; part number 974-505).
Product Features:
See More
Product Features:
- Versatile replacement – this dual-frequency programmable TPMS sensor can replace a failed sensor on vehicles with tire pressure monitoring systems that operate on both 315 MHz and 433MHz frequencies
- Programming required – easily calibrate this sensor with a Dorman MULTi-FIT II tool (sold separately, part number 974-505) by vehicle specifications or by cloning it to match the sensor it’s replacing
- Direct replacement – this sensor is engineered to match the fit and function of original equipment wheels and tires, and many, but not all aftermarket wheels and tires; check fit before installing
- Premium quality – communicating proper tire pressure is critical, and this sensor is backed by a brand with more than a century of engineering excellence and quality, with a warranty you can trust
Schrader – Direct Fit Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.29093)
from
$49.99
Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: 1 for 1 replacement sensor
- QUICK AND EASY: TPMS sensors are ready out of the box
- VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
- SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
- RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
KAI – Reconditioned OEM Aluminum Alloy Wheel, 17 X 7, Machined And Black (Part No.ALYFZ028U45)
from
$338.99
As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, KAI is Supplying a Reconditioned OEM Aluminum Alloy Wheel, 17 X 7, 7 Double Spoke, 5 Lug, 98MM Bolt Pattern, Machined And Black. It is Designed to Replace Your Existing Factory Wheel. Check to Be Sure it Fits Your Vehicle.
Product Features:
See More
Product Features:
- 17 X 7, 7 Double Spoke, 5 Lug, 98MM Bolt Pattern, Machined And Black, Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Lug Nuts And Center Cap Not Included
- Check Out The Large Selection Of Parts Available For Your Vehicle
Schrader – TPMS Sensor Service Kit (Part No.20018)
from
$3.79
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Black Anodized Valve Stem (Part No.VS925B)
from
$10.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- Black anodized clamp-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
- 0.453″ rim hole compatibility
- 200 PSI maximum cold inflation pressure
Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, sold by each (Part No.VS-925A)
from
$8.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
- 0.453″ rim hole compatiblity
- 200 PSI maximum cold inflation pressure
Crown Auto Jeep Replacmnt – Tpms Sensor, Front Or Rear, Left Or Right (Part No.56029398AB)
from
$116.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Manufactured From High Quality Material
- Engineered To The Specifications
- Meets The Quality Standards
- Designed For Performance And Durability
- Easy To Install
Xtra Seal – TPMS Valve 1 EA XTRA (Part No.17-20018)
from
$6.99
TPMS Valve 1 EA XTRA
Schrader – TPMS Sensor Service Kit (Part No.20008)
from
$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
Dill Air Control – Snap-In TPMS Service Kit: Rubber, 0.453 Inch Stem (Part No.VS950)
from
$4.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- TPMS Snap-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
- 0.453″ rim hole compatibility
- 80 PSI maximum cold inflation pressure
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27316)
from
$64.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
McGard – Chrome Bolt Style Cone Seat Wheel Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.27216)
from
$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a tapered seat.
Fiat 500L Wheels and Tires Categories
Helping You Find the Right Wheels and Tires for Your Fiat 500L
You love your 500L. So we’ve made it easier than ever to help you find Fiat 500L Wheels and Tires in our online catalog. Our inventory holds 39 aftermarket and OEM Wheels and Tires for your Fiat 500L, ranging from $2.99 to $7,322.99.
We offer parts from 10 brands trusted to make quality Wheels and Tires for your Fiat 500L. Before you buy, take some time to read through customer reviews. We currently have 2,633 reviews of Fiat 500L Wheels and Tires from previous customers. Some of the top rated parts include Direct Fit Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece with 3.7 stars and Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. with 1.0 stars.
Find your 500L Wheels and Tires here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Fiat 500L part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Wheels and Tires Brands for Your Fiat 500L
Our inventory holds Wheels and Tires for your Fiat 500L from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like Autel, Schrader, and Dill Air Control, all of which can keep that Fiat happy.
We have Dill Air Control parts available for your Fiat 500L in categories like TPMS Sensor Kits and TPMS Sensors. Some of the top-rated Dill Air Control parts in these categories are:
from
$9.49
(1)
Clamp-In TPMS Service Kit: Metal, 0.453 Inch Chrome Plated Valve Stem
Tire Pressure Sensor Service Kits
from
$8.99
(3)
Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, sold by each
Tire Pressure Sensor Valves
Top-Rated Schrader Wheels and Tires
Leading Schrader Wheels and Tires
We carry Schrader brand parts for your Fiat 500L across several catalog categories, including TPMS Sensors. Some of our most reviewed Schrader parts include:
from
$43.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Remote Tire Pressure Sensors
FAQs for Fiat 500L Wheels and Tires
What are the most purchased Wheels and Tires for the Fiat 500L?
Out of 39 Wheels and Tires for the Fiat 500L, the most popular in our inventory are:
from
$53.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Remote Tire Pressure Sensors
from
$11.49
This product is not rated
Box of 4 Metal Press-in Valve Stems for 1-Sensor
Tire Pressure Sensors
What are the top-rated Fiat 500L Wheels and Tires?
Top-rated Wheels and Tires for your Fiat 500L based on customer reviews/ratings are:
from
$58.99
(3)
Direct Fit Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
“I love the fact this automatically programs itself to my vehicle, no need to pay a repair shop for programming. Works great and easy to change if you ”
from
$11.49
(1)
Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves.
“Says on site these are Universal and will be compatible with 2015 Patriot. They are not. Will not fit in existing jeep sensors. Waste of time with veh”
