Dodge W250 Belts and Hoses

Essential Dodge W250 Belts and Hoses

Dayco – Dayco, Acc. Belt Idler Pulley (Part No.G60201221083DAY)

Dayco, Acc. Belt Idler Pulley

from

$42.55
The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

Dayco – Flex Radiator Hose (Part No.G20001163401DAY)

Flex Radiator Hose

from

$15.00
Precision molded in standard lengths, the Dayco Flex Radiator Hose is designed to replace straight or molded radiator hoses when routing allows. The knitted reinforcement and EPDM construction meets SAE J20R4, Class D-2 requirements, preventing splitting, ballooning and elongation, as well as resisting ozone and other detrimental environmental elements, coolants and temperature variations of -40F (-40?C) to +257F (+125C). The corrugations provide excellent hose flexibility without flattening or collapsing. The Dayco Flex Radiator Hose has a convenient plastic hang strap attached for quick and easy merchandising. Note: NOT suitable for fuel or oil transfer.

Product Features:
  • The knitted reinforcement and synthetic EPDM construction meets SAE J20R4, Class D-2 requirements
  • Resists ozone and other detrimental environmental elements, coolants, and temperature variations of -40F (-40C) to +257F (+125C)
  • The corrugations provide excellent hose flexibility without flattening or collapse
  • This hose is designed to prevent splitting, ballooning, and elongation
  • Limited Three Year Warranty
See More

Dayco – Bottom Cog V-Belt; 52.5 Inch Long, Exact Fit Premium Quality (Part No.15525)

Bottom Cog V-Belt; 52.5 Inch Long, Exact Fit Premium Quality

from

$20.79
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
See More

Yukon Gear – Seal Puller Tool (Part No.56063)

Seal Puller Tool

from

$57.99
Pinion and axle seal puller. No return.

Product Features:
  • Seal puller
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 22 Inch Long, 1.5 Inch Inner Dia. (Part No.81191)

Flex Radiator Hoses; EPDM Rubber, 22 Inch Long, 1.5 Inch Inner Dia.

from

$28.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – V-Belt, Idler/Tensioner Pulley; Steel, 107mm Dia., 27.14mm Width, 2 Grooves (Part No.89056)

V-Belt, Idler/Tensioner Pulley; Steel, 107mm Dia., 27.14mm Width, 2 Grooves

from

$21.29
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 76 mm Diameter, 7 Grooves (Part No.89008)

Serpentine Idler/Tensioner Pulley; Direct Fit, 76 mm Diameter, 7 Grooves

from

$36.49
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 3.50" Long, .75" Diameter (Part No.A70647)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 3.50" Long, .75" Diameter

from

$18.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Silicone Straight Heater Hose (Part No.26241)

Silicone Straight Heater Hose

from

$17.29
Constructed with silicone rubber. Ideal for extremely high temperature service in radiator, heater and other coolant transfer hose applications. Approved for marine applications.

Product Features:
  • High flexibility for versatile applications
  • High environmental resistance to weathering, coolant deterioration and ozone
  • Suitable for emission hose applications
  • Polyester textile cord reinforcement for high durability
  • Approved for marine applications
  • Exceeds SAE 20R3 Class A Tube and Cover
  • Temperature Range: -70 Deg. F to +400 Deg. F (-57 Deg. C to +204 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Serpentine Demanding Drive Kit; With Belt, Pulley and Tensioner, 3 Piece Set (Part No.D70973K1)

Serpentine Demanding Drive Kit; With Belt, Pulley and Tensioner, 3 Piece Set

from

$172.99
Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.

Product Features:
  • Custom engineered to cover 35 million problem drive vehicles in operation
  • Designed as an improvement over OE to address problematic drive systems
  • Features a specially designed serpentine belt with specific compounds that mitigate noise
See More

Dorman – Help – Carburetor Pre-Heater Hose – 2 In. X 28 In. – Paper/ Aluminum (Part No.96034)

Carburetor Pre-Heater Hose - 2 In. X 28 In. - Paper/ Aluminum

from

$16.29
This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles.
  • Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.910016A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$114.99
This Litens aftermarket part is designed and engineered by the Litens Automotive Group – the world’s largest supplier of Original Equipment (O.E.) tensioners. While the appearance is slightly different from the original equipment part, the Litens part maintains Dodge Ram’s original form, fit, and function specifications. In addition, Litens has given this heavy duty diesel tensioner an upgraded steel pulley for extended life and performance. Designed specifically for 1989-94 Dodge 5.9L diesel applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Designed and engineered by the world’s largest the original equipment tensioner suppliers to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Professional Mechanics will change this tensioner in approx. 20 minutes.
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999116A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$109.99
Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”* tensioner for the aftermarket. This popular tensioner designed for Chrysler / Dodge and Jeep vehicles, looks, fits, and performs like the original part being replaced. The original tensioner was sold with a mounting bracket (only available from the dealership) which can normally be reused when replacing the tensioner. This tensioner has been upgraded to include an integrated pulley bolt/washer. O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Installation instructions included.
  • Heavy Duty Polymer Pulley
  • Professional Mechanics will change this tensioner in 20 minutes
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 78 mm Diameter, 33 mm Smooth (Part No.89005)

Serpentine Idler/Tensioner Pulley; Direct Fit, 78 mm Diameter, 33 mm Smooth

from

$23.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Factory Air – Idler / Tensioner Pulley (Part No.45980)

Idler / Tensioner Pulley

from

$35.49
Constructed to ensure OE quality And reliability; Made with high grade bearings that are created to withstAnd higher operating temperatures; Prevents belt slips which eliminates noise; Constructed to ensure OE quality And reliability
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 60 Inch Length (Part No.80407)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 60 Inch Length

from

$16.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 48 Inch Length (Part No.80406)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 48 Inch Length

from

$18.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • Meets Type EC electro-chemical requirements as specified in SAE J1684
See More

Gates – Premium Molded Coolant Hose (Part No.20573)

Premium Molded Coolant Hose

from

$27.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter (Part No.E71167)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20" Long, 1.50" Diameter

from

$31.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 18.75 Inch Long, 1.75 Inch Inner Dia. (Part No.81341)

Flex Radiator Hoses; EPDM Rubber, 18.75 Inch Long, 1.75 Inch Inner Dia.

from

$18.79
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Heavy Duty Serpentine Belt; 66.25 Long, 8 Rib Count (Part No.5080663SC)

Heavy Duty Serpentine Belt; 66.25 Long, 8 Rib Count

from

$54.99
Developed using real-world track data, the Dayco supercharger belt is engineered with a proprietary EPDM construction with aramid cords and either 8 or 10 ribs depending on application. This belt is designed for late model high-performance supercharged street cars like ZR1 Corvettes, Shelby Mustangs and SRT Hellcat applications and is part of a line of racing belts engineered to provide maximum performance under the most extreme conditions. Comprised of specially blended compounds that are application specific, these belts are some of the strongest, most flexible belts on the market today.

Product Features:
  • Aramid fiber loaded EPDM construction and high stiffness PET cords eliminate belt stretch 
  • Proven to provide extreme durability and reduced slip under high boost conditions 
  • Tested by top level Drag Pak competitors, including Watson Racing, using roots style superchargers 
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K071150)

Micro-V« Serpentine Drive Belt

from

$108.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 66.559" Long, 8 Rib Count, Exact Fit (Part No.K080660HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 66.559" Long, 8 Rib Count, Exact Fit

from

$90.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Helping You Find the Right Belts and Hoses for Your Dodge W250

You love your W250. So we’ve made it easier than ever to help you find Dodge W250 Belts and Hoses in our online catalog. Our inventory holds 157 aftermarket and OEM Belts and Hoses for your Dodge W250, ranging from $1.49 to $172.99.

We offer parts from 12 brands trusted to make quality Belts and Hoses for your Dodge W250. Before you buy, take some time to read through customer reviews. We currently have 4,406 reviews of Dodge W250 Belts and Hoses from previous customers. Some of the top rated parts include Poly Rib Belt Serpentine Belt; 97.3 Long, 7 Rib Count with 4.4 stars and Poly Rib Belt Serpentine Belt; 88.58 Long, 7 Rib Count with 3.1 stars.

Find your W250 Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge W250 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Belts and Hoses Brands for Your Dodge W250

Our inventory holds Belts and Hoses for your Dodge W250 from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Driveworks, and Litens, all of which can keep that Dodge happy.

Top-Rated Dayco Belts and Hoses

Leading Dayco Belts and Hoses

We carry Dayco brand parts for your Dodge W250 across several catalog categories, including Pulleys. Some of our most reviewed Dayco parts include:

FAQs for Dodge W250 Belts and Hoses

What are the most purchased Belts and Hoses for the Dodge W250?

Out of 157 Belts and Hoses for the Dodge W250, the most popular in our inventory are:
Poly Rib Belt Serpentine Belt; 97.3 Long, 7 Rib Count
from $55.99
(70)
Poly Rib Belt Serpentine Belt; 97.3 Long, 7 Rib Count
Serpentine Belts

What are the top-rated Dodge W250 Belts and Hoses?

Top-rated Belts and Hoses for your Dodge W250 based on customer reviews/ratings are:
Poly Rib Belt Serpentine Belt; 88.58 Long, 7 Rib Count
from $38.49
(19)
Poly Rib Belt Serpentine Belt; 88.58 Long, 7 Rib Count
“Great services.”
Bottom Cog V-Belt; 44.5 Inch Long, Exact Fit Premium Quality
from $29.99
(15)
Bottom Cog V-Belt; 44.5 Inch Long, Exact Fit Premium Quality
“Great!……..No Worries!”