Dodge Viper Performance and Racing Products
Top Dodge Viper Performance and Racing Products Categories
We carry over 15 Performance and Racing Products in inventory for the Dodge Viper. If you’re looking for aftermarket Performance and Racing Products for your Dodge Viper, check out all these categories:
Essential Dodge Viper Performance and Racing Products
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
K&N – Cold Air Intake: Adds Up To 13 Horsepower, With Washable Air Filter (Part No.69-2528TTK)
from
$629.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter (Part No.57-1536)
from
$419.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Earls Performance Product – Brake Bleeder Screws (Part No.280035ERL)
from
$40.49
Brake Bleeder Screws
Energy Suspension – Sway Bar Bushing Set (Part No.5.5138R)
from
$30.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.5.5139G)
from
$30.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.5.5138G)
from
$30.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)
from
$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Product Features:
See More
Product Features:
- Indicates Coolant Temperature
- Helps to Prevent Injuries from coolant or steam burns
- Integrated Coolant Reclamation Valve
- Improves Underhood Appearance
- Fahrenheit and centigrade readings
- Various valve pressures available
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2004)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- 1-Year Limited Warranty
Dodge Viper Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your Dodge Viper
You love your Viper. So we’ve made it easier than ever to help you find Dodge Viper Performance and Racing Products in our online catalog. Our inventory holds 15 aftermarket and OEM Performance and Racing Products for your Dodge Viper, ranging from $14.99 to $871.99.
We offer parts from 6 brands trusted to make quality Performance and Racing Products for your Dodge Viper. Before you buy, take some time to read through customer reviews. We currently have 2,561 reviews of Dodge Viper Performance and Racing Products from previous customers. Some of the top rated parts include Thermocap Radiator Cap with 3.2 stars.
Find your Viper Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge Viper part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your Dodge Viper
Our inventory holds Performance and Racing Products for your Dodge Viper from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like K&N, Mallory, and Earls Performance Product, all of which can keep that Dodge happy.
We have Mallory parts available for your Dodge Viper in categories like Performance Ignition Products. Some of the top-rated Mallory parts in these categories are:
Top-Rated K&N Performance and Racing Products
Leading K&N Performance and Racing Products
We carry K&N brand parts for your Dodge Viper across several catalog categories, including Performance Oil Filters and Performance Air Intake Kits. Some of our most reviewed K&N parts include:
from
$17.99
(120)
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
Performance Oil Filters
from
$419.99
(3)
Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter
Engine Cold Air Intakes
FAQs for Dodge Viper Performance and Racing Products
What are the most purchased Performance and Racing Products for the Dodge Viper?
Out of 15 Performance and Racing Products for the Dodge Viper, the most popular in our inventory are:
What are the top-rated Dodge Viper Performance and Racing Products?
Top-rated Performance and Racing Products for your Dodge Viper based on customer reviews/ratings are:
from
$53.99
(17)
Thermocap Radiator Cap
“Worth the money if only for the looks. And will tell you the temp outside”
