Dodge Sprinter 3500 Belts and Hoses

Essential Dodge Sprinter 3500 Belts and Hoses

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 27mm Width, Smooth (Part No.89052)

Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 27mm Width, Smooth

from

$20.79
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

APA/URO Parts – Acc. Belt Idler Pull (Part No.G6020850688APA)

Acc. Belt Idler Pull

from

$29.18
Acc. Belt Idler Pull

Yukon Gear – Seal Puller Tool (Part No.56063)

Seal Puller Tool

from

$57.99
Pinion and axle seal puller. No return.

Product Features:
  • Seal puller
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

APA/URO Parts – Overflow Hose (Part No.G2005163696APA)

Overflow Hose

from

$6.88
Overflow Hose

Febi – Cooling Hose (Part No.G2021655668FEB)

Cooling Hose

from

$14.78
Cooling Hose

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7.5" Long, 1.44" Diameter (Part No.B72332)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7.5" Long, 1.44" Diameter

from

$10.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

INA – Acc. Belt Tensioner (Part No.G6001316546INA)

Acc. Belt Tensioner

from

$183.90
Acc. Belt Tensioner

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999426A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$147.99
This Litens belt tensioner is supplied by the original equipment (O.E.) tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this replacement tensioner is manufactured in Germany for Dodge and Freightliner Sprinter applications. This tensioner is also used on Grand Cherokee 3.0L. This tensioner is used to tension the belt on the secondary alternator for rear air conditioning applications. The aftermarket part maintains the O.E. specified hydraulic actuator. As with the original tensioner, the part comes equipped with a heavy duty polymer pulley for optimum performance and durability. To assist with belt removal and installation, this tensioner is equipped with a lift feature that is used to hold the tensioner open during belt installation and removal Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
  • Hydraulic Strut technology to provide constant belt tension and alignment throughout its service life.
  • Installation instructions included.
  • Heavy Duty/Light Weight Polymer Pulley with cap.
  • Professional Mechanics will change this tensioner in approx. 2.2 hours
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Original Equipment – Fuel Line (Part No.E50091610173OEA)

Fuel Line

from

$66.40
Fuel Line

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000603929ACD)

Professional V-Ribbed Serpentine Belt

from

$108.11
ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
  • Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
  • Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
  • Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
  • Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life
See More

ContiTech – Drive V-Belt (Part No.W1000790491CON)

Drive V-Belt

from

$48.86
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth (Part No.89133)

Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth

from

$24.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today.
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Stabilus – Acc. Belt Tension Da (Part No.G6003384053STB)

Acc. Belt Tension Da

from

$122.51
Acc. Belt Tension Da

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.59" Diameter (Part No.D72757)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.59" Diameter

from

$42.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Vaico – Radiator Hose (Part No.G2000655706VCO)

Radiator Hose

from

$6.88
Radiator Hose

Gates – Premium Molded Coolant Hose (Part No.23427)

Premium Molded Coolant Hose

from

$11.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Rein – Radiator Hose (Part No.CHR0733)

Radiator Hose

from

$19.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.5" Long, 1.34" Diameter (Part No.C72769)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.5" Long, 1.34" Diameter

from

$19.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.5" Long, 1.50" Diameter (Part No.E72334)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15.5" Long, 1.50" Diameter

from

$24.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Poly Rib Belt Serpentine Belt; 44.09 Long, 5 Rib Count (Part No.5050440)

Poly Rib Belt Serpentine Belt; 44.09 Long, 5 Rib Count

from

$24.79
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 81.125" Long, 7 Rib Count, Exact Fit (Part No.K070805HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 81.125" Long, 7 Rib Count, Exact Fit

from

$72.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 89.5" Long, 6 Rib Count, Exact Fit (Part No.K060888HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 89.5" Long, 6 Rib Count, Exact Fit

from

$57.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Poly Rib Belt Serpentine Belt; 80.12 Long, 7 Rib Count (Part No.5070801)

Poly Rib Belt Serpentine Belt; 80.12 Long, 7 Rib Count

from

$60.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads & temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives.
  • Engineered to help address noise issues caused by the belt drive
  • Engineered to help address noise issues caused by the belt driveá
  • Capable of handling more extreme temperatures and workloads
See More

Helping You Find the Right Belts and Hoses for Your Dodge Sprinter 3500

You love your Sprinter 3500. So we’ve made it easier than ever to help you find Dodge Sprinter 3500 Belts and Hoses in our online catalog. Our inventory holds 85 aftermarket and OEM Belts and Hoses for your Dodge Sprinter 3500, ranging from $6.88 to $245.99.

We offer parts from 18 brands trusted to make quality Belts and Hoses for your Dodge Sprinter 3500. Before you buy, take some time to read through customer reviews. We currently have 1,985 reviews of Dodge Sprinter 3500 Belts and Hoses from previous customers. Some of the top rated parts include Poly Rib Belt Serpentine Belt; 89 Long, 6 Rib Count with 4.5 stars and Poly Rib Belt Serpentine Belt; 89.57 Long, 6 Rib Count with 4.3 stars.

Find your Sprinter 3500 Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge Sprinter 3500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Belts and Hoses Brands for Your Dodge Sprinter 3500

Our inventory holds Belts and Hoses for your Dodge Sprinter 3500 from 18 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Litens, and Driveworks, all of which can keep that Dodge happy.

Top-Rated Dayco Belts and Hoses

Leading Dayco Belts and Hoses

We carry Dayco brand parts for your Dodge Sprinter 3500 across several catalog categories, including Pulleys. Some of our most reviewed Dayco parts include:

FAQs for Dodge Sprinter 3500 Belts and Hoses

What are the most purchased Belts and Hoses for the Dodge Sprinter 3500?

Out of 85 Belts and Hoses for the Dodge Sprinter 3500, the most popular in our inventory are:
Poly Rib Belt Serpentine Belt; 94.5 Long, 6 Rib Count
from $58.99
(49)
Poly Rib Belt Serpentine Belt; 94.5 Long, 6 Rib Count
Serpentine Belts
Poly Rib Belt Serpentine Belt; 94.5 Long, 6 Rib Count
from $38.99
(18)
Poly Rib Belt Serpentine Belt; 94.5 Long, 6 Rib Count
Serpentine Belts

What are the top-rated Dodge Sprinter 3500 Belts and Hoses?

Top-rated Belts and Hoses for your Dodge Sprinter 3500 based on customer reviews/ratings are:
Poly Rib Belt Serpentine Belt; 89 Long, 6 Rib Count
from $44.99
(24)
Poly Rib Belt Serpentine Belt; 89 Long, 6 Rib Count
“Great product and easy installation. Also, priced decently.”
Poly Rib Belt Serpentine Belt; 89.57 Long, 6 Rib Count
from $37.99
(20)
Poly Rib Belt Serpentine Belt; 89.57 Long, 6 Rib Count
“Work as describe”
Poly Rib Belt Serpentine Belt; 89.57 Long, 6 Rib Count
from $45.99
(19)
Poly Rib Belt Serpentine Belt; 89.57 Long, 6 Rib Count
“Direct replacement for SB on the Lexus SC400 (V8). Installation was a breeze. Dayco is a reliable brand and the belt was very affordable.”