Dodge Shadow Oil and Lubricants

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
• Refresh aging seals and prevent leaks with seal conditioners
• Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
• Enhanced friction performance helps maximize power with advanced friction-fighting agents
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• MaxLife High Mileage Synthetic Blend Engine Oil is specially designed for engines with over 75,000 miles, providing greater protection and maximizing engine life.

Castrol EDGE Euro Car 5W-30 A3/B4 Full Synthetic Motor Oil transforms under pressure, increasing film strength to prevent oil breakdown and reduce friction, unlocking maximum performance. Optimized to deliver 40% better performance than required by ACEA standards, it is recommended by world-leading auto manufacturers. This full-synthetic oil provides engine protection for the entire drain interval, even under the extreme pressure of high-output engines. Formulated for the latest technology, high-output engines that operate at extreme temperatures, it meets API CF/SL, ACEA A3/B4, BMW LL 01, Ford WSS-M2C937-A, MB Approval 229.3/229.5, Porsche A40, and VW 502 00/505 00 specifications, covering European OEM gasoline requirements for BMW, Mercedes-Benz, Porsche, and VW/Audi.

Product Features:

• Optimized to deliver 40% better performance than required by ACEA standards
• Recommended by world leading auto manufacturers
• Engine protection for the entire drain interval even under extreme pressure of high output engines
• Meets API CF/SL, ACEA A3/B4, BMW LL 01, Meets Ford WSS-M2C937-A, MB Approval 229.3/229.5, Porsche A40, VW 502 00/505 00
• Advanced Formulation: Specifically formulated for the latest technology, high-output engines that operate at extreme temperatures, ensuring reliable performance.

Mobil Super Synthetic 10W-30 full synthetic motor oils are engineered to provide outstanding engine protection in a wide variety of weather and driving conditions. Mobil Super helps to protect critical engine parts across a broad range of temperatures (up to 400 degrees Fahrenheit) without oxidative oil thickening and oil breakdown. Mobil Super Synthetic oils are specially formulated to help protect engines of all ages, and allows easy starting and rapid oil circulation during cold starts to protect critical engine parts. Meets or exceeds the latest industry specifications and API SN resource conserving. For our ultimate in performance and protection, consider our Mobil 1 motor oils, a family of advanced full synthetic engine oil.

Product Features:

• Full synthetic motor oil engineered to provide outstanding engine protection for vehicles of all ages in a wide variety of weather and driving conditions
• Helps to protect critical engine parts across a broad range of temperatures (up to 400 degrees F) without oxidative oil thickening and oil breakdown
• Specially formulated to help easy starting and rapid oil circulation during cold starts to protect critical engine parts
• Helps to control oil consumption and loss and provides protection beyond our conventional-synthetic blended products
• Meets or exceeds the latest industry specifications and API SN resource conserving

Castrol® GTX® High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on API and ACEA volatility specifications)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (in 5W-20, 5W-30 and 10W-30 grades versus industry specifications)
• Meets or exceeds API SP/SN PLUS/SN and ILSAC GF-6 specs
• Engine Longevity: Castrol GTX High Mileage motor oil is specifically designed to extend the life of high mileage engines by protecting against sludge, wear, and burn-off.
• Emission System Protection: Engineered to safeguard your emission system, this motor oil helps prevent catalytic converter failure, a common cause of ‘check engine’ lights in high mileage vehicles.
• Synthetic Blend Composition: This 10W-30 synthetic blend motor oil offers superior performance and protection compared to conventional oils, making it ideal for high mileage engines.
• Trusted Brand: As a leading consumer high-mileage brand, Castrol GTX High Mileage provides reliable and effective engine protection, ensuring your vehicle runs smoothly for longer.

Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It continues to innovate to meet the needs of consumers and vehicle manufacturers and remains among the most trusted brands today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If not addressed, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards.

Product Features:

• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge (when tested in engines with a high level of sludge)
• Helps minimize oil consumption
• Meets ilsac gf-6 specs
• Unsurpassed thermal breakdown protection: GTX Engine Oil, 20W50 provides superior protection against thermal breakdown, ensuring that your engine stays cool and runs smoothly even under extreme conditions.

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:

• Outstanding thermal and oxidation stability
• Excellent sludge and varnish protection
• Faster oil flow at start-up
• Volatility: lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.

CASTROL EDGE High Mileage 10W-30 Full Synthetic Motor Oil 1 Quart is the perfect solution for vehicles with over 75K miles. It is formulated with Fluid Titanium Technology and Phosphorus Replacement Technology to provide 10X better high-temperature performance and 6X better wear protection. This motor oil meets API SP/SN PLUS, ILSAC GF-6, GM 6094M standards and offers motor oils that meet OEM specifications. It is available in different grades, including 5W-20, 5W-30, and 10W-30. This motor oil is the natural choice for consumers who want to extend maximum engine performance and preserve the catalytic converter and the emission system. Try CASTROL EDGE High Mileage today and experience the difference in your vehicle’s performance.

Product Features:

• 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
• 6x better wear protection – as measured in seq iva test vs. latest test limit
• From the makers of the No. 1 high mileage brand
• Meets api sp/sn plus, ilsac gf-6, gm 6094m
• Castrol edge offers engine oils that meet oem specification approvals or licenses that cover over 97.3% of the us car parc.
• Available in the following grades: 5w-20, 5w-30, 10w-30, and 10w-40
• Try castrol edge high mileage today

Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to sludge, varnish and carbon build-up in your engine: three factors that reduce engine life, power and fuel economy. Castrol Ultraclean is a synthetic blend engine oil available in 0W-20, 5W-20 and 5W-30 grades. Its double-action formula has been proven to clean away the sludge that can block engine oilways* and helps prevent new sludge formation thanks to its synthetic technology. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard. If keeping your engine clean is important to you, it’s good to know that no other oil keeps engines cleaner.

Product Features:

• 1.4X superior sludge protection compared to tough industry standards (As measured in the Sequence VH Sludge test vs. API SP test limits)
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Premium-quality base oils and anti-wear additives that help extend the life of your engine
• Double-Action Formula: The synthetic blend engine oil features a double-action formula that effectively cleans away existing sludge and prevents new sludge formation.
• Versatile Grade Options: Available in 0W-20, 5W-20, and 5W-30 grades, Castrol Ultraclean offers flexibility to suit various engine requirements.
• Enhanced Engine Performance: By reducing sludge, varnish, and carbon build-up, this oil helps improve engine life, power, and fuel economy.
• Synthetic Blend Composition: The GTX Ultraclean 5W-30 Synthetic Blend Motor Oil combines the benefits of synthetic technology with the reliability of a standard oil class.

FRAM Full Synthetic High Mileage SAE 10W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 10W-30 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 10W-30 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Reduces oil cumsumption
• Excellent sludge and varnish protection
• Slows engine leaks
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Engine Cleaning and Efficiency: Helps clean out sludge buildup, keeping engines running clean with increased efficiency and power, ideal for engines with over 75,000 miles.
• Advanced LSPI Prevention: Contains additive technology designed to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs.
• Comprehensive Engine Protection: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, meeting stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications.

Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It has evolved to meet the needs of consumers and vehicle manufacturers since 1968 and continues to innovate and remain a trusted brand today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If untreated, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Help Extend the Life of Your Engine with Castrol GTX.

Product Features:

• Superior protection against engine sludge (when tested in engines with a high level of sludge)
• Advanced protection against viscosity and thermal breakdown
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption
• Unsurpassed thermal breakdown protection: GTX Engine Oil, 10W-40 provides superior protection against thermal breakdown, ensuring that your engine stays protected even under extreme temperatures.
• Prevents harmful sludge build-up: GTX Engine Oil, 10W-40 is specially engineered to prevent the build-up of harmful sludge, which can rob your engine of its power and ultimately its life.

CASTROL EDGE Euro Car 5W-30 C3 Full Synthetic Motor Oil is a high-performance engine oil that is designed to provide superior protection to the latest technology, high output engines that operate at extreme temperatures. This full-synthetic motor oil is formulated to transform under pressure, increasing film strength to prevent oil breakdown and reduce friction to unlock maximum performance. It is optimized to deliver 40% better performance than other motor oils and is recommended by world-leading auto manufacturers. This motor oil provides engine protection for the entire drain interval and meets API CF/SN, ACEA A3/B4, ACEA C3, GM dexos2 specifications. It is suitable for European OEM diesel specifications for Mercedes-Benz and VW/Audi. This motor oil was formerly known as Castrol SLX and is available in a 1-quart container.

Product Features:

• Optimized to deliver 40% better performance than required by acea standards
• Recommended by world leading auto manufacturers
• Engine protection for the entire drain interval even under extreme pressure of high output engines
• Meets api cf/sn, acea a3/b4, acea c3, gm dexos2, mb approval 229.31/229.51, vw 505 00/505 01, renault rn 0700/0710
• Formerly known as castrol slx
• Syntec Power Technology: The reformulated EDGE Engine Oil now features Syntec Power Technology, which enhances its performance even further.

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

• Better wear protection
• Increased fuel efficiency
• Better protection of the expensive catalytic emission system
• Improved compatibility with fuels containing ethanol
• Superior corrosion protection
• Meets ILSAC GF-5 and Dexos1 performance requirements

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
• 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
• 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
• EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
• MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN
• Enhanced Oil Stability: Resists oil breakdown 10-times better than industry standards, providing consistent performance and reliability.
• Premium Additives: Contains premium anti-wear additives, superior antioxidants, and extra detergents for maximum performance and engine longevity.

Castrol® GTX® is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It continues to innovate to meet the needs of consumers and vehicle manufacturers and remains among the most trusted brands today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If not addressed, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards.

Product Features:

• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge (when tested in engines with a high level of sludge)
• Helps minimize oil consumption
• Meets ILSAC GF-6 specs
• Engine Life Extension: Castrol« GTX« has been helping to extend engine life for over 50 years, making it one of the most trusted motor oil brands today.
• Conventional Oil Composition: As a premium conventional motor oil, Castrol« GTX« meets the needs of both consumers and vehicle manufacturers.
• Superior Performance: Exceeds tough industry standards by protecting against new oil splatter formation, ensuring optimal engine performance.
• Versatile SAE Weight: With an SAE oil weight of 10W-40, Castrol« GTX« is suitable for a wide range of vehicles, providing reliable protection and performance.

FRAM Conventional High Mileage 10W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles. FRAM Conventional High Mileage 10W30 Engine Oil will protect domestic and imported vehicles and equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 10W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
• Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
• Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
• Meets Stringent Standards: Formulated to meet or exceed all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.

FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robustï additive system to provide reliable engine protection across a broad range of operatingï conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engineï designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to preventï low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation andï shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets theï requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• High Mileage Oil Class: Valvoline MaxLife Synthetic Engine Oil is specially designed for engines with over 75,000 miles, providing superior protection against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repair

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.

Castrol® GTX® is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It continues to innovate to meet the needs of consumers and vehicle manufacturers and remains among the most trusted brands today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If not addressed, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards.

Product Features:

• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Advanced protection against viscosity and thermal breakdown
• Superior protection against engine sludge (when tested in engines with a high level of sludge)
• Helps minimize oil consumption
• Meets ILSAC GF-6 specs
• Superior Performance: Exceeds tough industry standards in protecting against new oil splatter formation, providing superior performance and reliability.
• Versatile Use: Suitable for a variety of driving conditions including heavy traffic, poor fuel quality, and harsh environments, making it a versatile choice for many vehicles.
• High-Quality Composition: This conventional motor oil with SAE weight 20W-50 offers robust protection and performance, maintaining engine health and efficiency.

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

Castrol Conventional 30W Engine Oil is a high-quality monograde oil that provides maximum engine wear protection. It contains dispersants, antioxidants, detergents, and other additives that help to keep the engine clean and running smoothly. This heavy-duty formula is engineered to provide greater protection against thermal breakdown, which can cause engine damage and reduce performance. Castrol Conventional 30W Engine Oil exceeds all passenger car and light-truck manufacturer’s warranty requirements and is made in the USA. It is an ideal choice for those who want to keep their engines running smoothly and efficiently. Protect your engine against thermal breakdown with Castrol Conventional 30W Engine Oil.

Product Features:

• Heavy-duty formula provides maximum engine wear protection in warm climates; designed for use in temperatures above 40 Deg. F
• Contains dispersants, antioxidants, detergents and varnish inhibitors that help prevent ring-sticking and build up of harmful engine deposits
• Engineered for greater protection against thermal breakdown
• Exceeds all passenger car and light-truck manufacturers’ warranty requirements for the protection of gasoline and turbocharged engines where api sm, sl, sj or sh is recommended
• Made in the usa
• Thermal Protection: GTX Engine Oil, SAE 30 provides superior protection against thermal breakdown, ensuring your engine stays cool and running smoothly.

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• High Mileage Protection: Valvoline Full Synthetic High Mileage Engine Oil is specially designed to protect engines with over 75,000 miles against wear, friction, heat, and deposits, ensuring a longer lifespan for your vehicle.

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:

• Phosphorus replacement technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
• Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
• Provides extra protection for older vehicles: Castrol GTX High Mileage Engine Oil is specifically designed to provide extra protection for high mileage engines, helping to extend the life of your vehicle.
• Synthetic blend composition: This engine oil is a synthetic blend, combining the benefits of both conventional and synthetic oils to provide superior protection against sludge, wear, and burn-off.

Castrol® Ultraclean synthetic blend engine oil is our cleanest GTX ever. Environmental factors such as poor fuel quality, hot weather and stop-start driving conditions can lead to the buildup of sludge that can reduce engine life, power and fuel economy. Castrol Ultraclean has a double-action formula proven to clean away the sludge that can block engine oilways and helps prevent new sludge formation from occurring. In fact, it provides up to 1.4X better sludge protection than is demanded by the latest industry standard (as measured in the Sequence VH Sludge test vs. API SP test limits). No other oil keeps engines cleaner.

Product Features:

• Premium-quality base oils and anti-wear additives that help extend the life of your engine
• 1.4X superior sludge protection compared to tough industry standards, as measured in the Sequence VH Sludge test vs. API SP test limits
• Advanced protection against viscosity and thermal breakdown
• Superior protection against high-temperature deposits
• Meets or exceeds API SP/SN PLUS/SN, ILSAC GF-6 and latest Ford specs
• Double-Action Formula: Castrol Ultraclean’s unique double-action formula effectively cleans away existing sludge and prevents new sludge formation, ensuring optimal engine performance.
• Enhanced Engine Life and Performance: Designed to combat environmental factors like poor fuel quality, hot weather, and stop-start driving conditions, which can reduce engine life, power, and fuel economy.
• Synthetic Blend Composition: Combines the benefits of synthetic and conventional oils, offering superior protection and performance in a 5W-30 SAE oil weight.
• Cleanest GTX Ever: Marketed as Castrol’s cleanest GTX oil, ensuring that no other oil keeps engines cleaner, making it an ideal choice for maintaining engine cleanliness and efficiency.

Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:

• Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
• 40% better wear protection vs. industry standard as tested in the sequence ivb engine test
• 25% better deposit protection with superior engine cleaning detergents as tested in the gmod engine test
• Exceptional high/low temperature protection defends your motor no matter the weather conditions
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn, gm dexos 1 gen 3
• Superior engine protection: Valvoline SynPower Full Synthetic Engine Oil provides superior protection against engine sludge and varnish, ensuring your engine stays clean and running smoothly.