Dodge Ramcharger Fuel and Emissions Systems

Essential Dodge Ramcharger Fuel and Emissions Systems

Carquest Premium – Fuel Tank Selector Valve (Part No.FSC1007)

Fuel Tank Selector Valve

from

$80.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Idle Air Control Valve (Part No.ABA1632)

Idle Air Control Valve

from

$43.99
Carquest Premium idle air control valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Idle air control valves, or sometimes known as idle air motors, are used to maintain the engine speed at idle by precisely adjusting the amount of air allowed to enter the intake. Our Carquest Premium idle air control (IAC) valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium idle air control valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium idle air control valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Precision engineering and robust design to withstand harsh under hood environment
  • Gaskets or seals are included if required for installation
  • Extensive design validation testing and 100% end-of-line tested
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1077)

Multi-Use Connector

from

$33.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Spectra Premium – Fuel Filler Neck (Part No.FN968)

Fuel Filler Neck

from

$117.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
  • Unit is dual coated for enhanced corrosion protection
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
  • Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
  • Tested with OE fuel cap to prevent evaporative emission and check engine light failure
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1255)

Manifold Absolute Pressure Sensor (MAP)

from

$58.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1001)

Secondary Air Injection Pump Check Valve

from

$39.99
The Secondary Air Injection system is an emission control device designed to pump fresh air into the engine exhaust system to reduce harmful emissions. The Air Injection Pump Check Valve will allow air flow in one direction only to prevent an engine back-fire condition.

Product Features:
  • Application matched component to ensure the system can be returned to like new condition.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Locking Fuel Tank Cap (Part No.10501)

Locking Fuel Tank Cap

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Cardone – Remanufactured Smog Air Pump (Part No.32-253)

Remanufactured Smog Air Pump

from

$157.99
CARDONE Remanufactured Smog Pumps are engineered for quick installation and no comebacks. These pumps come with all necessary components for easy installation, while other brands leave out integral components, such as inlets and outlets that commonly break during installation. CARDONE engineers pay special attention to proper vane size and shape on each application to maintain proper flow, while other brands consolidate vane sizes for their own convenience.

Product Features:
  • 100 percent testing of all units guarantees reliable performance every time.
  • High temperature grease extends bearing life, resulting in longer pump life.
  • New carbon shoes/vanes on every unit ensure accurate air output to meet today’s stringent emissions standards.
  • Guaranteed fit and function.
  • Meets or exceeds O.E.M performance.
See More

Carquest Premium – EGR Valve (Part No.EGC1111)

EGR Valve

from

$165.99
Carquest Premium exhaust gas recirculation (EGR) valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Our Carquest Premium EGR valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium EGR valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium EGR valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Precision engineering and robust design to withstand harsh under hood environment
  • Gaskets or seals are included if required for installation
  • Extensive design validation testing and 100% end-of-line tested
  • Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Fuel Pump Strainer FS260345 (Part No.FS260345)

Fuel Pump Strainer FS260345

from

$10.49
CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A211-1061)

Remanufactured Fuel Injector

from

$61.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

NTK – Switching Oxygen Sensor: 4 Wire, 23.25" Long, Heated, Direct Fit (Part No.23023)

Switching Oxygen Sensor: 4 Wire, 23.25" Long, Heated, Direct Fit

from

$52.99
NGK is the sensor specialist for import and domestic applications. Established under the NGK product family, oxygen sensors are part of our ongoing commitment to streamlining product types and increasing coverage. A ceramic company at our core, uses cutting-edge technology to control the ceramic used in our oxygen sensors from raw material to finished product. is the world’s largest supplier and manufacturer of OE oxygen sensors. Combining expertise and innovation, oxygen sensors deliver superior fit, form, and function. oxygen sensors undergo extensive testing during manufacturing to ensure quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for comprehensive market support and OE application technology.

Product Features:
  • OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60958-1)

Fuel Injection Throttle Body Mounting Gasket

from

$3.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1233)

Air Charge Temperature Sensor

from

$28.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
  • Application matched components ensures system operation in like new condition.
See More

Delphi – Fuel Pump Module Assembly: With Float Arm, Seal (Part No.FG0372)

Fuel Pump Module Assembly: With Float Arm, Seal

from

$203.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Dorman – Fuel Filler Neck Grommet (Part No.577-500)

Fuel Filler Neck Grommet

from

$19.99
This fuel filler neck seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel filler neck seal is designed to match the fit and function of the original seal on specified vehicles
  • Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35900 For Chrysler SB 318-360 CID (Part No.35900)

Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35900 For Chrysler SB 318-360 CID

from

$2483.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35900 Pro-Flo 4 EFI System for Small-Block Chrysler 318-360 C.I. engines is equipped with the latest technology and features. The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure. Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

Product Features:
  • The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure
  • Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
  • The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
  • It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
  • We’ve added features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
  • The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
  • The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
  • E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
  • The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet
See More

Carquest Premium – Multi-Use Connector (Part No.ABA3461)

Multi-Use Connector

from

$13.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12427)

Fuel Cap Tester Adapter:

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1749)

Multi-Use Connector

from

$28.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings (Part No.217-3365)

Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings

from

$9.99
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Delphi – Fuel Injection Pressure Regulator (Part No.FP10393)

Fuel Injection Pressure Regulator

from

$127.99
Precision is key for the fuel pressure regulator on any vehicle. At Delphi, we use OE engineering to test our regulators and fuel technologies to ensure the utmost performance and durability. Our Nitrile¿ diaphragms are resilient against high-ethanol fuels, and we utilize two designs to help meet emissions standards while covering a wide array of domestic vehicles. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management. Visit our Resource Center for helpful tips and tricks on fuel pumps technologies and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
  • Quiet operation, no audible regulator noise
  • Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
  • Consistent and predictable fuel pressure throughout system range of control provides great drivability
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1437)

Multi-Use Connector

from

$19.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1117)

Manifold Absolute Pressure Sensor (MAP)

from

$86.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

Carquest Premium – Multi-Use Connector (Part No.FSA1013)

Multi-Use Connector

from

$31.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Helping You Find the Right Fuel and Emissions Systems for Your Dodge Ramcharger

You love your Ramcharger. So we’ve made it easier than ever to help you find Dodge Ramcharger Fuel and Emissions Systems in our online catalog. Our inventory holds 92 aftermarket and OEM Fuel and Emissions Systems for your Dodge Ramcharger, ranging from $1.29 to $2,537.99.

We offer parts from 19 brands trusted to make quality Fuel and Emissions Systems for your Dodge Ramcharger. Before you buy, take some time to read through customer reviews. We currently have 16,707 reviews of Dodge Ramcharger Fuel and Emissions Systems from previous customers. Some of the top rated parts include Oxygen Sensor: Upstream, 4 Wire, 11.81" Long, Heated, Exact Fit with 4.5 stars and Electric Fuel Pump with 2.5 stars.

Find your Ramcharger Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge Ramcharger part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Fuel and Emissions Systems Brands for Your Dodge Ramcharger

Our inventory holds Fuel and Emissions Systems for your Dodge Ramcharger from 19 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, FELPRO, and Motorad, all of which can keep that Dodge happy.
We have Dorman parts available for your Dodge Ramcharger in categories like Fuel Pumps. Some of the top-rated Dorman parts in these categories are:
Fuel Filler Neck Grommet
from $19.99
(2)
Fuel Filler Neck Grommet
Fuel Filler Neck Seals

Top-Rated Carquest Premium Fuel and Emissions Systems

Leading Carquest Premium Fuel and Emissions Systems

We carry Carquest Premium brand parts for your Dodge Ramcharger across several catalog categories, including Gas Caps. Some of our most reviewed Carquest Premium parts include:
Non-Locking Fuel Tank Cap
from $15.49
(142)
Non-Locking Fuel Tank Cap
Gas Caps

FAQs for Dodge Ramcharger Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the Dodge Ramcharger?

Out of 92 Fuel and Emissions Systems for the Dodge Ramcharger, the most popular in our inventory are:
Fuel Injector O-Ring Kit
from $8.49
(109)
Fuel Injector O-Ring Kit
Fuel Injector O-Ring Kits
Non-Locking Tethered Fuel Tank Cap
from $24.29
This product is not rated
Non-Locking Tethered Fuel Tank Cap
Gas Caps

What are the top-rated Dodge Ramcharger Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your Dodge Ramcharger based on customer reviews/ratings are:
Oxygen Sensor: Upstream, 4 Wire, 11.81" Long, Heated, Exact Fit
from $63.99
(332)
Oxygen Sensor: Upstream, 4 Wire, 11.81" Long, Heated, Exact Fit
“Good savings on line”
Electric Fuel Pump
from $69.99
(37)
Electric Fuel Pump
“Very good product”
Locking Fuel Tank Cap
from $23.99
(35)
Locking Fuel Tank Cap
“It works great”