Dodge Ram 4500 Wheels and Tires
Top Dodge Ram 4500 Wheels and Tires Categories
We carry over 50 Wheels and Tires in inventory for the Dodge Ram 4500. If you’re looking for aftermarket Wheels and Tires for your Dodge Ram 4500, check out all these categories:
Essential Dodge Ram 4500 Wheels and Tires
Carquest Premium – Hub Assembly with Wheel Bearing (Part No.94-330203)
from
$332.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
MOOG Hub Assemblies – Wheel Bearing & Hub Assembly (Part No.515102)
from
$339.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
- EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Xtra Seal – Tpms Service Kit For Chrysler Dodge Jeep (Part No.17-20013AK)
from
$29.49
Tpms Service Kit For Chrysler Dodge Jeep
Xtra Seal – Parts Kit For Chry/Gm (Part No.15-20201)
from
$1.99
Parts Kit For Chry/Gm
Driveworks – Wheel Seal (Part No.S-710454)
National – Multi Purpose Seal (Part No.710454)
from
$48.49
Product Features:
See More
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
- Excellent high temperature capabilities
- Compatible with wide range of fluids
- Delivers quality and reliable performance for every type of repair
Dorman – Wheel Lug Nut: 9/16-18 Thread, Flanged, 1.125" Length, Black, 1 Pack (Part No.611-296.1)
from
$14.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut: 9/16-18 Thread, Flanged, 1.125" L, Black Oxide (Sold by each) (Part No.611-296)
from
$13.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.
Product Features:
See More
Product Features:
- Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
- Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Wheel, 19.5" x 6" (Part No.939-163)
from
$369.99
This wheel is specifically designed to directly replace the original wheel on certain vehicle applications. It is thoroughly tested to meet safety standards for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this wheel is designed to match the fit and structural appearance of the original wheel on specific vehicle years, makes and models
- Cost-effective solution – offers original equipment quality and appearance for a competitive price
- Thoroughly tested – dynamic radial testing, radial run-out testing, and axial run-out testing ensures performance
- Trustworthy quality – backed by team of designers and engineers in the United States
Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)
from
$11.49
Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.
Product Features:
See More
Product Features:
- Four Metal Valve Stems
- Press-in interchangeable metal valve stem
- Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
- Press release valve design allows easy installation without a tool for sensor head fitting
- High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
Schrader – TPMS Sensor – Snap-In Rubber Valve (Part No.28434)
from
$45.99
Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader¿s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: 1 for 1 replacement sensor
- QUICK AND EASY: TPMS sensors are ready out of the box
- VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
- Premium quality TPMS sensors produced in Schrader¿s secure and highly automated OE manufacturing facilities
- Premium quality TPMS sensors produced in Schrader┐s secure and highly automated OE manufacturing facilities
- Quick and easy installation that does not require programming
- 1 for 1 direct-fit OE replacement TPMS sensor services the specific make, model, and year
- 1 for 1 direct-fit OE replacement TPMS sensor services the specific make, model, and yeará
- Ready out of the box
- OE fit, form and function validated and engineered by over 350 engineers dedicated to TPMS
Driveworks – Tapered Roller Bearing (Part No.S-33281)
National – Tapered Roller Bearing Cone (Part No.33281)
from
$62.99
Product Features:
See More
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)
from
$11.49
The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.
Product Features:
See More
Product Features:
- Includes 4 Rubber Press-in Valve Stems
- Compatible with Autel 1-Sensors
- Compatible with Autel 315MHz & 433MHz MX-Sensors
- Warranty on Material and Workmanship
- High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
Xtra Seal – Tpms Snap In Valve – Ford (Part No.17-20018)
from
$6.99
Tpms Snap In Valve – Ford
Driveworks – Tapered Roller Bearing (Part No.S-39412)
Driveworks – Tapered Roller Bearing (Part No.S-33462)
National – Bearing Race (Part No.39412)
from
$28.49
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Dorman – Wheel Stud: Serrated, 9/16-18 Thread Size, Right Hand Thread, 10 Pack (Part No.610-613)
from
$136.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Dorman – Serrated Wheel Stud 9/16-18 – 15.69 mm Knurl, 75.81mm Length (Sold by each) (Part No.610-613.1)
from
$11.99
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.
Product Features:
See More
Product Features:
- Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
- Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
- Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
- Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
Schrader – TPMS Sensor – Snap-In Rubber Valve (Part No.20398)
from
$58.99
Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader¿s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: 1 for 1 replacement sensor
- QUICK AND EASY: TPMS sensors are ready out of the box
- VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
- Premium quality TPMS sensors produced in Schrader¿s secure and highly automated OE manufacturing facilities
- Premium quality TPMS sensors produced in Schrader┐s secure and highly automated OE manufacturing facilities
- 1 for 1 direct-fit OE replacement TPMS sensor services the specific make, model, and year
- 1 for 1 direct-fit OE replacement TPMS sensor services the specific make, model, and yeará
- Quick and easy installation that does not require programming
- Ready out of the box
- OE fit, form and function validated and engineered by over 350 engineers dedicated to TPMS
Autel – 1-Sensor Bulk Box (240-Pack, Rubber Valve) (Part No.300050)
from
$7323.00
The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
- Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
- Combined Frequency 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Maximum Signal Strength / Battery Reliability
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – MX-Sensor 1-Sensor: TPMS Sensors With Rubber Valve Stems, Bulk Box (20-Pack) (Part No.300010)
from
$579.99
The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz & 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve.
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – Chrome Metal Press-in Valve for 1-Sensor (Part No.CV-003)
from
$8.99
Product Features:
See More
- Chrome Grey Metal Press-in Valve Stem
- Compatible with Autel 1-Sensor
- Warranty on Material and Workmanship
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)
from
$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Sensor must be programmed to specifi Y/M/M vehicle
- Compatible with most programming tools
- Make sure that your TPMS programming tool is updated to it’s latest version
- Combines 314.9, 315 & 433 MHz application into one sensor
- Future proofed to support new and pending OE system technologies
- Optimizes inventory levels and returns
- Reduces overal cost and increases speed of service
- Use service kit 20018 to replace the rubber valve assembly
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dodge Ram 4500 Wheels and Tires Categories
Helping You Find the Right Wheels and Tires for Your Dodge Ram 4500
You love your Ram 4500. So we’ve made it easier than ever to help you find Dodge Ram 4500 Wheels and Tires in our online catalog. Our inventory holds 50 aftermarket and OEM Wheels and Tires for your Dodge Ram 4500, ranging from $1.99 to $7,323.00.
We offer parts from 10 brands trusted to make quality Wheels and Tires for your Dodge Ram 4500. Before you buy, take some time to read through customer reviews. We currently have 179 reviews of Dodge Ram 4500 Wheels and Tires from previous customers. Some of the top rated parts include Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, sold by each with 4.7 stars and Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. with 1.0 stars.
Find your Ram 4500 Wheels and Tires here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge Ram 4500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Wheels and Tires Brands for Your Dodge Ram 4500
Our inventory holds Wheels and Tires for your Dodge Ram 4500 from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like Autel, Schrader, and Dorman, all of which can keep that Dodge happy.
We have National parts available for your Dodge Ram 4500 in categories like Wheel Bearings. Some of the top-rated National parts in these categories are:
Top-Rated Schrader Wheels and Tires
Leading Schrader Wheels and Tires
We carry Schrader brand parts for your Dodge Ram 4500 across several catalog categories, including TPMS Sensors. Some of our most reviewed Schrader parts include:
FAQs for Dodge Ram 4500 Wheels and Tires
What are the most purchased Wheels and Tires for the Dodge Ram 4500?
Out of 50 Wheels and Tires for the Dodge Ram 4500, the most popular in our inventory are:
from
$44.99
This product is not rated
MX-Sensor 1-Sensor with Press-in Rubber Valve Stem and Combined Frequency
Tire Pressure Sensors
from
$55.99
This product is not rated
EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 1 Sensor
Tire Pressure Sensors
from
$11.49
This product is not rated
Box of 4 Metal Press-in Valve Stems for 1-Sensor
Remote Tire Pressure Sensors
What are the top-rated Dodge Ram 4500 Wheels and Tires?
Top-rated Wheels and Tires for your Dodge Ram 4500 based on customer reviews/ratings are:
from
$8.99
(3)
Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, sold by each
“Used to replace the rubber valves that came with the tpms sensor”
from
$11.49
(1)
Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves.
“Says on site these are Universal and will be compatible with 2015 Patriot. They are not. Will not fit in existing jeep sensors. Waste of time with veh”
