Name: Hydraulic Hose Kit
Brand: Russell
SKU: 694510
Price: 169.99 USD

from

$169.99

Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common components. To compliment the looks of the hose installation, three finishes are available – ultra-bright Endura, traditional blue anodized or our new black anodized fittings.

from

$459.99

Product Features:

Bolt On Quickly And Easily
Top Performance/Clean Machine
Increased Efficiency
Leak Free Seal
Connects To Exhaust Head Pipe
Complete With Premium Gaskets
16-Gauge Tubing For Durability

from

$18.99

Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$185.99

RngPnn

from

$451.99

Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.

Product Features:

Direct Plug And Play Power
Increased Turbo Boost And Fuel Pressure
In Cabin On The Fly Power Adjustment
4 Position Switch

from

$208.99

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Product Features:

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
Will not void vehicle warranty(limited)
Product might not be available in all states due to local laws.

from

$469.99

The GT Gas and Diesel tuners unlock more horsepower and torque to meet the unique demands you put on your vehicle. With preloaded tuning, customizable gauges to track performance, and a wide variety of hauling and off-roading features, you’ll have plenty of power to take on tough jobs or improved fuel economy for long highway hauls.

Product Features:

Track critical performance data in real-time on easy to navigate virtual gauges
Select between multiple street-tested, dyno-proven tunes for economy, towing or performance.
Reads and clears DTC (Diagnostic Trouble Codes) with ease
Manage tire size, gear ratio, speed limiter, speedometer calibrations, shift points, and more. Offering shift-on-the-fly tuning and better control of defueling and regeneration.
Product might not be available in all states due to local laws.

from

$55.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$195.99

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Warranty and limited Performance & Sound Guarantee.

Product Features:

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$163.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$80.99

Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Standard Motor Products SMP Uf-198
MSD 8228
Improved Idle Quality
Resists Shock And Vibration
Resists Corrosion

from

$242.99

Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:

Complete Super Tune Kit
8mm Spiral Core Wires
Accel Classic Core Plugs
High Performance Cap And Rotor
Reduced Emissions

from

$112.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS: Made from stainless steel for durability and long life
BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$33.99

ACCEL Heavy-Duty Caps offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability.

Product Features:

Performance replacement
Heavy duty for maximum energy transfer

from

$435.99

The Momentum HD is designed around a massive Pro DRY S performance 360 degree radial flow air filter with 3-layers of progressive synthetic media providing 99.2% cumulative efficiency. The unique filter-to-housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse.

Product Features:

Out Produces Factory Intake By 31%
High Quality 1-Piece Sealed Housing w/Auxiliary Air Inlet
CAD-Designed Roto-Molded Intake Tube
Age POWER Pro DRY S Filter Included For Maximum Performance

from

$20.99

Header Gasket Set

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:

Designed to allow high flow rates and a consistent flow of oil to your engine
Pleated synthetic-blend filtration media removes most harmful contaminants
Fast and easy Wrench-Off removal using the welded one-inch hex nut
High capacity to withstand the service intervals recommended by vehicle manufacturers
Heavy-duty canister for outstanding durability
Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
Designed to operate with all synthetic, conventional, and blended motor oils
1-Year Limited Warranty

from

$426.99

i3

from

$6.29

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Lasts Longer
Looks Great

from

$276.99

Durable Body Mount Set with Hardware: For Enhanced Vehicle Stability and Control

from

$34.49

Product Features:

Service Part
Makes Connections Quick And Easy

from

$53.99

Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features: