from

$156.99

Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).

Product Features:

Cross pin shaft
Fits Dana Spicer 60 and 70
Powr Lok positraction only

from

$36.99

Product Features:

Bulkhead fitting kit
Includes bulkhead fitting, outer fitting and o-ring

from

$941.99

Differential

from

$66.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$747.99

Yukon Performance steel spool for 8Dana 80 with 35 spline axles, 4.10 & up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler Dana Spicer 80 with 35 spline axles
4.10 and up ratio only
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$797.99

Axle shaft damaged or bearings worn out? This axle shaft assembly directly replaces the original equipment on certain vehicles, ready for install right out of the box..

Product Features:

Direct replacement – this axle shaft assembly replaces the original equipment on specific vehicle years, makes and models.
Ready to install – comes pre-assembled for simple installation with no further assembly required
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$152.99

Set-up bearing (one bearing). HM803149. No return.

Product Features:

Set up bearing
Fits HM803149 pinion bearing
Easily slips on and off pinion journal to allow for pinion depth adjustment

from

$70.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$16.49

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o

from

$867.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$1049.99

Yukon Trac Lok positraction internals for Dana 80 and with 35 spline axles. Uses round design cross pin. (Not for Dana 60 or 70). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects. Dana 80 Trac Lok spider gears, 35spline (” round” design cross pin, NOT Dana 60 or NOT Dana 70 ).

Product Features:

Spider gear kit
Fit Dana Spicer 80 Powr Lok positraction with 35 spline axles
Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.

from

$549.99

All Spicer ring and pinion gears are designed and tested to meet original equipment specifications. When you purchase genuine Spicer ring and pinion gear sets, you can be confident the ring and pinion set will meet or exceed the exact Dana standards that original equipment manufacturers have relied upon for more than a hundred years.

from

$18.99

Product Features:

Bulkhead quit connect fitting

from

$156.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

BEARING KIT 98 & LATER DANA 60 FORD

from

$198.99

Product Features:

Spider gear kit
Fits Dana Spicer 60, 30 spline open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$1119.99

Differential

from

$6.99

Product Features:

Oil baffle for Dana Spicer 60 and Dana Spicer 70U

from

$1037.99

All Spicer ring and pinion gears are designed and tested to meet original equipment specifications. When you purchase genuine Spicer ring and pinion gear sets, you can be confident the ring and pinion set will meet or exceed the exact Dana standards that original equipment manufacturers have relied upon for more than a hundred years.

from

$16.99

Standard Open cross pin bolt lock ring for 11.5″ GM.

Product Features:

Cross pin bolt lock ring
Fits GM 11.5″

from

$13.99

Product Features:

Cover gasket
Fits Dana Spicer 60, 70, 70U and 70HD

from

$5.99

Product Features:

Pinion nut washer
Fits Dana Spicer 80

from

$221.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$273.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Chrysler 9.25″ front
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.