Dodge Ram 2500 Pickup Performance and Racing Products

Please Select your Vehicle to See Exact Fit Parts

Essential Dodge Ram 2500 Pickup Performance and Racing Products

Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.2503)

Chrome Distributor Hold-Down Clamp

from

$15.79
Competition design uses a stud, washer & nut to secure the clamp rather than a bolt. The clamp itself is also chromed.

Product Features:
  • Rolled Edges For Strength
  • Ideal For Magnetos
  • Ideal For Ignition Distributor
See More

aFe POWER – QUANTUM Cold Air Intake: Gain up to 3 Horsepower! Dry Air Filter For Easy Maintenance (Part No.53-10001D)

QUANTUM Cold Air Intake: Gain up to 3 Horsepower! Dry Air Filter For Easy Maintenance

from

$376.99
Quantum Cold Air Intake Systems (Patent Pending) by aFe POWER are the latest in airflow technology for your Ford Power Stroke 6.7L (td) truck. From the uniquely integrated Filter-to-Housing design to the state of the art, lightweight injection molded base and top Pro DRY S filter, Quantum delivers dyno-proven performance gains, convenience, value and installs in minutes.

Product Features:
  • Outflows Factory Intake
  • Unique Filter To Housing Interface For Easy Installation
  • CAD Designed XLPE Roto-Molded Intake Tube For Optimum Airflow
  • Intake Tube Heat Soak Resistant and Durable
See More

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2004)

Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:
  • Designed to allow high flow rates and a consistent flow of oil to your engine
  • Pleated synthetic-blend filtration media removes most harmful contaminants
  • Fast and easy Wrench-Off removal using the welded one-inch hex nut
  • High capacity to withstand the service intervals recommended by vehicle manufacturers
  • Heavy-duty canister for outstanding durability
  • Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
  • Designed to operate with all synthetic, conventional, and blended motor oils
  • 1-Year Limited Warranty
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13131G)

Tie Rod Dust Boot

from

$6.29
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Competition Cams – High Energy 206/206 Hydraulic Flat Cam (Part No.20-208-2)

High Energy 206/206 Hydraulic Flat Cam

from

$436.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Accel – Tst Dodge99-01 5.2L 99-02 5.9L (Part No.TST24)

Tst Dodge99-01 5.2L 99-02 5.9L

from

$242.99
Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:
  • Complete Super Tune Kit
  • 8mm Spiral Core Wires
  • Accel Classic Core Plugs
  • High Performance Cap And Rotor
  • Reduced Emissions
See More

Accel – Dist Cap:Dodge/Jeep Magnum V8 (Part No.120329)

Dist Cap:Dodge/Jeep Magnum V8

from

$33.99
ACCEL Heavy-Duty Caps offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability.

Product Features:
  • Performance replacement
  • Heavy duty for maximum energy transfer
See More

Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-601-4)

Mutha' Thumpr 235/249 Hydraulic Flat Cam and Lifter Kit

from

$403.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
  • Best with aftermarket converters and more rear gear.
  • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
See More

Energy Suspension – Control Arm Bushing Set (Part No.5.3131R)

Control Arm Bushing Set

from

$163.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Motive Gear – Differential Carrier (Part No.C9.25E)

Differential Carrier

from

$165.99


Product Features:
  • CHRYS 9 1/4″ OPEN EMPTY CASE CAN USE ABS RING.
See More

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

Intake Manifold Bolts

from

$18.29
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:
  • Grade 5 socket head bolts are zinc plated for protection and appearance
  • Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
  • Washers Included
See More

Flowtech – Shorty; Smog Headers (Part No.91945FLT)

Shorty; Smog Headers

from

$459.99


Product Features:
  • Bolt On Quickly And Easily
  • Top Performance/Clean Machine
  • Increased Efficiency
  • Leak Free Seal
  • Connects To Exhaust Head Pipe
  • Complete With Premium Gaskets
  • 16-Gauge Tubing For Durability
See More

Energy Suspension – Control Arm Bump Stop Set (Part No.2.9101G)

Control Arm Bump Stop Set

from

$41.49
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Control Arm
See More

Energy Suspension – Sway Bar Bushing Set (Part No.5.5127R)

Sway Bar Bushing Set

from

$37.49
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1008)

Performance Cylinder Head Gasket

from

$44.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)

High-Performance Ignition Coil - Direct OE Fit

from

$80.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Standard Motor Products SMP Uf-198
  • MSD 8228
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Richmond Gear – Differential Ring And Pinion (Part No.69-0220-1)

Differential Ring And Pinion

from

$438.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

NOS/Nitrous Oxide Systems – Diesel; Nitrous System (Part No.02519NOS)

Diesel; Nitrous System

from

$1076.99
If you think the torque of that monster diesel is something to brag about then you should feel it with the extra power of NOS. This kit works with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with 10 pound bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring and complete instructions.

Product Features:
  • Provides Additional Air Your Diesel Wants
  • Additional 50 HP
  • w/No Fuel System Or Electronic Upgrades
  • Complete Kit For Easy Installation
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$34.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Energy Suspension – Control Arm Bushing Set (Part No.5.3131G)

Control Arm Bushing Set

from

$163.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Energy Suspension – BodyMntBshKt (Part No.5.4112G)

BodyMntBshKt

from

$361.99
BodyMntBshKt

Energy Suspension – Hyper-Flex System (Part No.5.18109G)

Hyper-Flex System

from

$533.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

MagnaFlow – 7 X 7in. Round Straight-Through Performance Exhaust Muffler (Part No.12771)

7 X 7in. Round Straight-Through Performance Exhaust Muffler

from

$192.99
The MagnaFlow 7 X 7in. Round Straight-Through Performance Exhaust Muffler 12771 is engineered to enhance your ride with a healthy helping of our signature exhaust sound and dyno-proven performance thanks to its free-flowing straight-through perforated stainless steel core wrapped in stainless steel mesh and acoustic fiber fill. The reversible, universal 4/4in. diameter inlet/outlet Straight-Through layout allows you to install it in whatever orientation and configuration you see fit. However, professional installation is highly recommended. Muffler 12771s weight-optimized 7x7x20in. oval-shaped body features a satin finish that elevates the overall aesthetics of your current exhaust setup. 12771 is made of durable, corrosion resistant stainless steel and produced using cutting-edge CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited construction warranty.

Product Features:
  • Delivers a Smooth, Deep Tone
  • Mufflers are Bi-Directional
  • 100% Stainless Steel
See More

Helping You Find the Right Performance and Racing Products for Your Dodge Ram 2500 Pickup

You love your Ram 2500 Pickup. So we’ve made it easier than ever to help you find Dodge Ram 2500 Pickup Performance and Racing Products in our online catalog. Our inventory holds 79 aftermarket and OEM Performance and Racing Products for your Dodge Ram 2500 Pickup, ranging from $5.99 to $1,398.99.

We offer parts from 16 brands trusted to make quality Performance and Racing Products for your Dodge Ram 2500 Pickup. Before you buy, take some time to read through customer reviews. We currently have 1,783 reviews of Dodge Ram 2500 Pickup Performance and Racing Products from previous customers. Some of the top rated parts include High-Performance Ignition Coil – Direct OE Fit with 3.9 stars and Thermocap Radiator Cap with 3.2 stars.

Find your Ram 2500 Pickup Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge Ram 2500 Pickup part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Performance and Racing Products Brands for Your Dodge Ram 2500 Pickup

Our inventory holds Performance and Racing Products for your Dodge Ram 2500 Pickup from 16 trusted brands. You’ll find OEM and aftermarket parts from brands like K&N, Mr. Gasket, and Energy Suspension, all of which can keep that Dodge happy.

Top-Rated K&N Performance and Racing Products

Leading K&N Performance and Racing Products

We carry K&N brand parts for your Dodge Ram 2500 Pickup across several catalog categories, including Performance Oil Filters. Some of our most reviewed K&N parts include:

FAQs for Dodge Ram 2500 Pickup Performance and Racing Products

What are the most purchased Performance and Racing Products for the Dodge Ram 2500 Pickup?

Out of 79 Performance and Racing Products for the Dodge Ram 2500 Pickup, the most popular in our inventory are:
Intake Manifold Bolts
from $18.29
(12)
Intake Manifold Bolts
Performance Intake Manifolds
Tie Rod Dust Boot
from $5.99
(3)
Tie Rod Dust Boot
Performance Tie Rod End Boots
Tie Rod Dust Boot
from $5.99
(1)
Tie Rod Dust Boot
Performance Tie Rod End Boots

What are the top-rated Dodge Ram 2500 Pickup Performance and Racing Products?

Top-rated Performance and Racing Products for your Dodge Ram 2500 Pickup based on customer reviews/ratings are:
High-Performance Ignition Coil - Direct OE Fit
from $80.99
(18)
High-Performance Ignition Coil – Direct OE Fit
“Great coil for my 5.9 magnum block noticed a big difference in performance!!”
Thermocap Radiator Cap
from $53.99
(17)
Thermocap Radiator Cap
“Worth the money if only for the looks. And will tell you the temp outside”
Spectre Air Intake Kit
from $211.99
(5)
Spectre Air Intake Kit
“got it for my truck and it runs nice and clean I believe every one should get one. they also improve gas mileage”