from

$11.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$41.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$7.99

Outer stub axle nut washer for Dodge Dana 44 & 60. This replaces Spicer part number 45523.

Product Features:

Outer stub axle nut washer for Dodge Dana 44 and 60

from

$24.99

Product Features:

Outer stud dust shield
Fits Chrysler 9.25″ front

from

$17.99

9.25″ Chrysler C/clip, 0.205″ wide for 4137429 axle.

Product Features:

c-clip for Chrysler 9.25″ rear
0.205″ thick

from

$17.99

Disconnect axle pilot bearing for Dana 30, 44 & 60, 0.813″ O.D.

Product Features:

Axle pilot bearing
Fits Dana Spicer 44 with disconnect axles
0.813″ O.D.

from

$121.99

Yukon replacement yoke for Dana 30, 44, 50, and Dana 300 with 26 spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Dana Spicer 44
26 spline
1310 u-joint size
3.219″ snap ring span
1.062″ cap diameter
Outside snap ring design
U-bolt style

from

$144.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$5.99

Axle stud, 1 33/64″ X 1/2″ -20.

Product Features:

Rear axle stud
1/2″ x 20 thread
0.662″ knurl diameter
1 33/64″ long
31/64″ shoulder length

from

$413.54

Dorman’s Axle Shaft comes as a complete kit. Packaged with all the installation hardware essential for a complete repair, it provides time-saving convenience at an affordable price.

Product Features:

Comes assembled with U-Joints installed
Direct replacement for a proper fit every time
Durable steel construction for long-lasting performance
Vehicle try-on testing has been conducted on this part to ensure trouble-free performance

from

$182.99

Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:

Pinion Redi-sleeve
Fits Dana Spicer 25, 27, 30, 4 and 50

from

$99.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$48.99

Replacement left hand axle seal for 99-02 Dana 60 Dodge disconnect .Yukon Mighty seal.

Product Features:

Axle seal
Fits 1999-2002 Dodge Dana 60 with vacuum disconnect
Left hand side

from

$21.49

Ensure a leak-free repair when servicing axle bearings or parking brake shoes. This axle shaft flange seal is a direct replacement for the original gasket and should be replaced every time work is performed at the axle flange.

Product Features:

Ideal replacement – this axle shaft flange seal directly replaces the original gasket without having to visit the dealer
Required for routine service – this gasket should be replaced every time work is performed at the axle flange
Durable construction – this axle shaft flange gasket is made of tough, durable materials for leak-free performance
Quality tested – this flange gasket has been designed and tested for a guaranteed fit

from

$47.99

Plug adapter for extra-large clamshell. No Return.

Product Features:

Plug adapter for Extra Large clamshell
Fits carrier bearing puller

from

$42.90

Axle Shaft Bearing

from

$92.99

Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1561TV axle bearing and seal kit, for Ford and Dodge, TorringtonBrand, 2.985″ OD, 1.700″ ID. This axle bearing & seal kit services one side only.

Product Features:

Fits Ford and Dodge applications
Includes axle bearing and seal
Torrington Brand
Services one side
2.985″ O.D.
1.700″ I.D.

from

$129.99

Product Features:

Drive flange cap
Fits Dana 60

from

$77.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$197.95

Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. They are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.

Product Features:

OE Quality, fit and performance
Precise driveshaft alignment and support
Pre-lubricated and sealed
Metal reinforced seals to prevent contamination
Manufactured from durable rubber compounds

from

$9.49

This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$42.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.

from

$59.28

Spindle Nut

from

$613.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability