Dodge Ram 1500 Van Drivetrains

Essential Dodge Ram 1500 Van Drivetrains

Yukon Gear – Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25" (Part No.33253)

Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25"

from

$26.99
Product Features:
  • Pinion nut
  • Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion
See More

Yukon Gear – Carrier Installation Kit For ’76 & Up Chrysler 8.25" Rear (Part No.57014)

Carrier Installation Kit For '76 & Up Chrysler 8.25" Rear

from

$78.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for ’76 & up Chrysler 8.25″ rear.

Product Features:
  • Fits 1976 and up Chrysler 8.25″
  • Includes carrier bearings and races
See More

Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)

Rubber Fill Plug For Chrysler

from

$22.99
Product Features:
  • Rubber fill plug
  • Fits Chrysler 7.25″, 8.25″ and 9.25″
See More

Yukon Gear – 7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25 (Part No.41192)

7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25

from

$49.99
7260 U/joint strap, Small Chrysler w/ bolts, 7.25, 8.25, 8.75, 9.25.

Product Features:
  • u-joint strap kit
  • Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
  • 7260 u-joint size
  • Includes two straps and four bolts
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6079)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$78.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 92-05; DODGE 84-10; GMC 92-05; RAM 11-20;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1984-2020
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.3780 INCH / 35 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: SQUARE FRAME
See More

SKF – MT Output Shaft Seal (Part No.J1157215568SKF)

MT Output Shaft Seal

from

$17.79
MT Output Shaft Seal

Dorman – Differential Ring And Pinion Set (Part No.697-309)

Differential Ring And Pinion Set

from

$396.99
This differential ring and pinion directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this ring and pinion set matches the fit and function of the original components on certain vehicle applications.
  • Effective fix – eliminates grinding and whining from failed original bearings.
  • Thoroughly tested – vehicle try-on testing and rigorous quality control measures ensure longevity
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

FAG US – BEARING (Part No.6207)

BEARING

from

$15.49
BEARING

Yukon Gear – 9.25" Chrysler C/Clip (Part No.33075)

9.25" Chrysler C/Clip

from

$17.99
9.25″ Chrysler C/clip, 0.205″ wide for 4137429 axle.

Product Features:
  • c-clip for Chrysler 9.25″ rear
  • 0.205″ thick
See More

FAG US – AXLE BEARING (Part No.FC68302)

AXLE BEARING

from

$35.49
AXLE BEARING

Dorman – Spindle Washer – I.D. 19.1mm O.D. 41.6mm Thickness 2.6mm (sold by each) (Part No.618-061)

Spindle Washer - I.D. 19.1mm O.D. 41.6mm Thickness 2.6mm (sold by each)

from

$14.29
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – 7.25" & 8.25" Chrysler Redi Sleeve (Part No.30224)

7.25" & 8.25" Chrysler Redi Sleeve

from

$115.99
7.25″ & 8.25″ Chrysler REDI sleeve.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Chrylser 7.25″ and 8.25″
See More

FAG US – SHAFT SEAL (Part No.SS3234)

SHAFT SEAL

from

$10.99
SHAFT SEAL

Yukon Gear – 8.25" Chrysler Cover Gasket (Part No.23000)

8.25" Chrysler Cover Gasket

from

$12.99
8.25″ Chrysler cover gasket.

Product Features:
  • Cover gasket
  • Fits Chrysler 8.25″
See More

Yukon Gear – 8.25" Chrysler Pinion Gear Thrust Washer (Part No.33273)

8.25" Chrysler Pinion Gear Thrust Washer

from

$26.99
8.25″ Chrysler pinion gear thrust washer.

Product Features:
  • Pinion gear thrust washer
  • Fits Chrysler 8.25″
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Yoke For Chrysler 8.25" With A 1310 U/Joint Size (Part No.41010)

Yoke For Chrysler 8.25" With A 1310 U/Joint Size

from

$289.99
Yukon yoke for Chrysler 8.25″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps, with outside snap rings for the Jeep Cherokee. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler 8.25″
  • 27 spline
  • 1310 u-joint size
  • Outside snap ring design
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Strap style
See More

Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)

7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25"

from

$10.99
7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:
  • U-Joint strap bolt
  • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
  • 7290 u-joint size
See More

Yukon Gear – Yoke For Chrysler 9.25" With A 7290 U/Joint Size (Part No.41002)

Yoke For Chrysler 9.25" With A 7290 U/Joint Size

from

$279.99
Yukon yoke for Chrysler 9.25″ with a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler 9.25″ rear
  • 29 spline
  • 7290 u-joint size
  • 2.625″ snap ring span
  • 1.125″ cap diameter
  • Inside snap ring design
  • Strap style
See More

Yukon Gear – Yoke For Chrysler 7.25" And 8.25" With A 1310 U/Joint Size (Part No.41004)

Yoke For Chrysler 7.25" And 8.25" With A 1310 U/Joint Size

from

$226.99
Yukon yoke for Chrysler 7.25″ and 8.25″ with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler 7.25″ and 8.25″
  • 27 spline
  • 1310 u-joint size
  • Outside snap ring design
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Strap style
See More

Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)

R1559Tv Rear Axle Bearing And Seal Kit

from

$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • Torrington Brand
  • 2.530″ O.D.
  • 1.620″ I.D.
See More

Spicer – Universal Joint (Part No.5-1410X)

Universal Joint

from

$51.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Carquest Premium – 4WD Indicator Light Switch Connector (Part No.PTA1174)

4WD Indicator Light Switch Connector

from

$35.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (Part No.615-072.1)

Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In.

from

$3.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dodge Ram 1500 Van Drivetrains Categories

Helping You Find the Right Drivetrains for Your Dodge Ram 1500 Van

You love your Ram 1500 Van. So we’ve made it easier than ever to help you find Dodge Ram 1500 Van Drivetrains in our online catalog. Our inventory holds 289 aftermarket and OEM Drivetrains for your Dodge Ram 1500 Van, ranging from $1.99 to $1,629.99.

We offer parts from 22 brands trusted to make quality Drivetrains for your Dodge Ram 1500 Van. Before you buy, take some time to read through customer reviews. We currently have 11,150 reviews of Dodge Ram 1500 Van Drivetrains from previous customers. Some of the top rated parts include Center Support Bearing Motor Mount: Center, 1 Piece with 2.9 stars and Differential Shaft Lock Bolt with 4.0 stars.

Find your Ram 1500 Van Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge Ram 1500 Van part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Drivetrains Brands for Your Dodge Ram 1500 Van

Our inventory holds Drivetrains for your Dodge Ram 1500 Van from 22 trusted brands. You’ll find OEM and aftermarket parts from brands like Moog, Driveworks, and Spicer, all of which can keep that Dodge happy.
We have Spicer parts available for your Dodge Ram 1500 Van in categories like Drive Shafts and Axles. Some of the top-rated Spicer parts in these categories are:
Universal Joint
from $40.99
(10)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $51.99
(1)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $39.99
(5)
Universal Joint
U-Joints

Top-Rated MOOG Driveline Products Drivetrains

Leading MOOG Driveline Products Drivetrains

We carry MOOG Driveline Products brand parts for your Dodge Ram 1500 Van across several catalog categories, including Universal Joints. Some of our most reviewed MOOG Driveline Products parts include:
Greaseable Premium Universal Joint
from $25.99
(143)
Greaseable Premium Universal Joint
U-Joints
Greaseable Super Strength Universal Joint
from $36.99
(35)
Greaseable Super Strength Universal Joint
U-Joints

FAQs for Dodge Ram 1500 Van Drivetrains

What are the most purchased Drivetrains for the Dodge Ram 1500 Van?

Out of 289 Drivetrains for the Dodge Ram 1500 Van, the most popular in our inventory are:
Universal Joint
from $15.99
(65)
Universal Joint
U-Joints
Taper Bearing Set
from $10.79
(33)
Taper Bearing Set
Differential Bearings
DIFFERENTIAL GASKET
from $6.79
(21)
DIFFERENTIAL GASKET
Rear Housing Cover Gaskets

What are the top-rated Dodge Ram 1500 Van Drivetrains?

Top-rated Drivetrains for your Dodge Ram 1500 Van based on customer reviews/ratings are:
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
“great”
Universal Joint
from $7.89
(11)
Universal Joint
“Fit good to make the install easy .”