Dodge Power Wagon Belts and Hoses
Top Dodge Power Wagon Belts and Hoses Categories
We carry over 15 Belts and Hoses in inventory for the Dodge Power Wagon. If you’re looking for aftermarket Belts and Hoses for your Dodge Power Wagon, check out all these categories:
Essential Dodge Power Wagon Belts and Hoses
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26603)
from
$22.49
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, the main cause of pipe failure
- Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
- EPDM tube and neoprene lid for extended lifespan
- Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
- Resistant to heat, oil and ozone
- Compliant with SAE 20R5 Type EC Class D-2 specifications
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25478)
from
$18.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for better leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with a minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Gates – Vulco Straight Coolant Hose (Sold by inch) (Part No.24028)
from
$1.99
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.
Product Features:
See More
Product Features:
- Heat-resistant cover
- Cover marked in 1-inch increments to facilitate approximate cut lengths, allows for “custom” installations.
- Meets the requirements of SAE 20R1 standard for Class D-2 walls
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: For a maintenance-free connection, use PowerGrip SB clamps
- Caution: Do not use for fuel or oil transfer applications
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26501)
from
$29.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, which is the primary cause of hose failure
- Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
- EPDM tube and Neoprene cover for extended service life
- Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
- Heat, oil and ozone resistant
- Meets SAE 20R5 Type EC Class D-2 specifications
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transport applications.
- Caution: Do not use for fuel or oil transfer applications.
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25480)
from
$25.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil, and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 Degrees F (+125 Degrees C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transport applications.
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26504)
from
$34.49
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, the main cause of pipe failure
- The steel wire spiral allows them to adopt multiple shapes without bending or crushing
- EPDM tube and neoprene lid for extended lifespan
- The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
- Resistant to heat, oil and ozone
- Meets SAE 20R5 Type EC Class D-2 specifications
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transport applications.
- Caution: Do not use for fuel or oil transfer applications.
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR24400)
from
$40.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stresses, especially on small diameter pulleys, while also dissipating heat.
- High modulus, high strength tensile cord
- Oil and heat resistant construction
- Compliant with SAE J636b and SAE J637 specifications
- Meets RMA oil and heat resistant standards and static conductivity requirements
- NOTE: Some sizes are available as Gates PowerBand V-belts.
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR24476)
from
$49.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stresses, especially on small diameter pulleys, while also dissipating heat.
- High modulus, high strength tensile cord
- Oil and heat resistant construction
- Compliant with SAE J636b and SAE J637 specifications
- Compliant with RMA standards for oil and heat resistance and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand V-belts
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR24489)
from
$40.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded grooves reduce bending stress, especially on small diameter pulleys, while also dissipating heat.
- High modulus and high strength traction cord
- Oil and heat-resistant construction throughout
- Compliant with SAE J636b and SAE J637 specifications
- It meets RMA standards for oil and heat resistance and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand V-belts
Gates – Automotive XL High Capacity V-Belt (Part No.9330)
from
$31.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Ground to ensure precise dimensional control of the top width and side wall for proper fit to the pulley.
- Thermally active tension cords for maintenance-free operation when the belt is properly installed and tensioned
- It resists oil, heat, ozone, weather, and decay to improve belt life.
- Meets or exceeds SAE J636C specifications
Imperial – Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Size: 1/2 in. x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Medium duty applications
Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)
from
$59.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Used on Chevrolet V8 applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Comes with all parts needed for the job
Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28411)
from
$3.79
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for long periods of time, which prolongs the service life
- Compliant with SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Warning: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Dodge Power Wagon Belts and Hoses Categories
Helping You Find the Right Belts and Hoses for Your Dodge Power Wagon
You love your Power Wagon. So we’ve made it easier than ever to help you find Dodge Power Wagon Belts and Hoses in our online catalog. Our inventory holds 15 aftermarket and OEM Belts and Hoses for your Dodge Power Wagon, ranging from $1.99 to $59.99.
We offer parts from 2 brands trusted to make quality Belts and Hoses for your Dodge Power Wagon. Before you buy, take some time to read through customer reviews. We currently have 940 reviews of Dodge Power Wagon Belts and Hoses from previous customers.
Find your Power Wagon Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge Power Wagon part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Belts and Hoses Brands for Your Dodge Power Wagon
Our inventory holds Belts and Hoses for your Dodge Power Wagon from 2 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial and Gates, all of which can keep that Dodge happy.
We have Imperial parts available for your Dodge Power Wagon in categories like Transmission Cooler Hoses. Some of the top-rated Imperial parts in these categories are:
FAQs for Dodge Power Wagon Belts and Hoses
What are the most purchased Belts and Hoses for the Dodge Power Wagon?
Out of 15 Belts and Hoses for the Dodge Power Wagon, the most popular in our inventory are:
