Name: Wheel Bearing and Hub Assembly: 5 Studs
Brand: Driveworks
SKU: NT512478
Price: 183.99 USD

from

$183.99

Driveworks wheel hub assemblies are made with high precision through state-of-the-art technology and manufactured with strict quality-control criteria. Every wheel hub assembly is specifically designed to fit the designated applications and may be used as a direct replacement for the original part. Each part is engineered using OE data and measurements to ensure fitment, performance, and longevity.

Product Features:

Fitment and function are ensured by precision machining, rigorous testing, and meticulous inspection of material and components.
Driveworks wheel hub assemblies are designed to meet stringent fatigue requirements in order to reduce premature failure.
Reinforced seal design material allows for optimal performance in harsh environments.
Driveworks wheel hub assemblies undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability.
Where applicable, pre-installed speed sensors will automatically sync to the vehicle’s anti-lock braking system upon successful installation and provide accurate speed-reading data.
Brand may vary by location

from

$40.99

Huf Baolong Electronics (BH Sens) IntelliSens Universal Sensor (must be programmed prior to install) will function exactly like the OE sensors and match the quality of the OE sensor being replaced. The IntelliSens sensors can now be updated with new application using a TPMS Tool (never without the most coverage).

Product Features:

Programmable – Only take 3 seconds to configure to specific application. Supported by ATEQ, Matco, SnapOn, Mac Tools, Monster Tools, KTool, NAPA Tools, Bartec, OTC branded tools along with many others.
Always up-to-date with the new programming function via the TPMS diagnostic tool
Reprogrammable and Copy Clone Capable
Full WAL and PAL technology support for auto-locate.
Metal valve included.
Flexible valve angle 0 to 36 degrees.

from

$73.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$243.99

Product Features:

RELIABLE PERFORMANCE – Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
EXTENDED SERVICE LIFE – Application-specific advanced raceway design reduces stress, rotation and heat on components
EASY TO INSTALL – Engineered and designed for fast, hassle-free installation
CORROSION PROTECTION – Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$339.99

Product Features:

19 X 7, 40mm Offset, 5 Spoke, 5 Lug 5 Bolt Pattern, All Painted Black, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Lug Nuts And Center Cap Not Included
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$35.99

This wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles
Restores functionality – reliable replacement for an original cap that is missing or damaged due to collision
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.99

The original lug nuts on certain vehicles have a failure-prone two-piece design that makes warping common and removal difficult. There’s often a thin veneer that gets damaged with repeated use, and if moisture gets underneath it can cause the cover to bulge. Those failures can make the nuts difficult or impossible to remove, and if they get stuck, removing them usually requires damaging the wheel itself. This Dorman OE FIX replacement matches the OE fit and function but has a one-piece, carbon steel design to prevent similar issues from happening in the future.

Product Features:

Improved design – direct replacement, one-piece lug nut design, vs. two-piece factory design that often leads to premature failure of the wheel nut
Corrosion resistant – by removing the veneer of the OEM lug nut design there’s no chance of moisture and rust causing it to bulge and deform
Thoroughly tested – part has undergone proof load, salt spray, hardness and thread check testing to meet strict standards
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$175.99

The convenient way to order wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. McGard manufactures wheel locks and lug nuts in the USA to meet or exceed O.E.M. standards for safety and durability. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts are guaranteed for life not to rust, chip or peel. Designed and built for the real world. Think about it: harsh elements, nasty corrosive wheel cleaners, overzealous impact guns, loose fitting lug wrenches and lead-foot drivers. This kind of treatment destroys ordinary lug nuts. McGard lug nuts can take the punishment and keep your wheels looking beautiful. This product may contain globally sourced materials/components.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
For use with steel or aluminum wheels with exposed decorative lug nuts that are tapered at the bottom.
Set of 16 Lug Nuts, 4 Wheel Locks, 1 Key, & 1 Key Storage Pouch

from

$8.29

Product Features:

PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$76.99

Coast to Coast International Wheel Covers are a quick and cost effective alternative to replacing factory OEM wheel covers that have been lost, stolen or worn over time. With a wide variety of designs and finishes, it is easy to find a style that is right for any vehicle. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

Designed And Manufactured To Fit Steel Wheels And Emulate OEM Designs
Constructed From High-Quality, Durable, Automotive Grade ABS
Two Layers Of Clear Coat Enhance And UV Protect The Finish
A Cost Effective Alternative To Replace OEM Wheel Covers That Have Been Lost, Stolen Or Worn Over Time
Installs In Minutes Without Tools
Bolt on retention, most secure wheel cover retention

from

$42.99

Huf Baolong Electronics (BH Sens) IntelliSens Universal Sensor (must be programmed prior to install) will function exactly like the OE sensors and match the quality of the OE sensor being replaced. The IntelliSens sensors can now be updated with new application using a TPMS Tool (never without the most coverage).

Product Features:

Programmable – Only take 3 seconds to configure to specific application. Supported by ATEQ, Matco, SnapOn, Mac Tools, Monster Tools, KTool, NAPA Tools, Bartec, OTC branded tools along with many others.
Always up-to-date with the new programming function via the TPMS diagnostic tool
Reprogrammable and Copy Clone Capable
Full WAL and PAL technology support for auto-locate.
Rubber valve included.

from

$8.49

These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:

Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$16.49

SplineDrive Installation tool for use only with McGard SplineDrive lug nuts with a 1/2-20, M12x1.25 or M12x1.5 thread size. This product may contain globally sourced materials/components.

Product Features:

For use only with McGard SplineDrive lug nuts with a 1/2-20, M12x1.25 or M12x1.5 thread size.
Installation Tool has 13/16″ Hex Size

from

$6.99

Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader¿s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.

Product Features:

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
Replacement components in Schrader TPMS service kits are sensor specific
The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention
OE fit, form, and function
Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention

from

$5.99

Schrader recommends replacing service kit components using genuine Schrader TPMS service kits at every tire change. . All pieces in the kit are intended for one-time use only. TPMS service Pks are not DIY products and require appropriate skills, knowledge, and equipment for service.

Product Features:

DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
Each kit includes a fully assembled Schrader rubber valve assembly and mounting screw
Valve cores are designed to OE specifications
Replacement components in Schrader TPMS service kits are sensor specific
OE fit, form, and function
The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention

from

$68.99

Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:

MX-Sensor Components
4 Metal Valves
4 Rubber Valves
Rubber Gasket (2×10 pcs)
Screw Nut (2×10 pcs)
Washer (2×10 pcs)
Metal Valve Cap (2X10 pcs)
Rubber Valve Cap (2X10 pcs)
Valve Core (2X10 pcs)

from

$37.99

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$17.99

Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:

Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.99

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:

Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$4.99

These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$4.99

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

TPMS Snap-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
0.453″ rim hole compatibility
80 PSI maximum cold inflation pressure

from

$5.29

All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.

from

$8.49

All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.

Product Features:

OE – validated part identical to the dealer
Electroless nickel-plated valve cores
Advanced anodization of valve stems and hex nuts
Includes torque specifications and installation instructions
TPMS service kits are required whenever performing tire replacement or service
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$11.49

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

Includes 4 Rubber Press-in Valve Stems
Compatible with Autel 1-Sensors
Compatible with Autel 315MHz & 433MHz MX-Sensors
Warranty on Material and Workmanship
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

from

$20.99

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Crown Automotive Is The Premiere Manufacturer And Distributor Of Quality Replacement Parts
Hazardous Free Material
Offers OE Fit And Function
Easy To Install

Dodge Journey Wheels and Tires

Top Dodge Journey Wheels and Tires Categories

Essential Dodge Journey Wheels and Tires

Driveworks – Wheel Bearing and Hub Assembly: 5 Studs (Part No.NT512478)

Huf North America – Tire Pressure Monitoring System (TPMS) Sensor (Part No.UVS7050)

Carquest Premium – Multi-Use Connector (Part No.PTC1572)

MOOG Hub Assemblies – Wheel Bearing & Hub Assembly (Part No.513286)

KAI – Reconditioned OEM Aluminum Alloy Wheel, 19 X 7, Painted Black (Part No.ALYCM026U45)

Dorman – Chrome Wheel Center Cap (Part No.909-062)

Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Dome top, 1.22" L, Chrome(Sold by each) (Part No.611-074)

McGard – Black Bulge Style Cone Seat Wheel Installation Kit for 5 Lug Vehicles (M12 x 1.5 Thread Size) (Part No.84538)

National – Bearing Race (Part No.LM501310)

COAST TO COAST – 17 Inch, 10 Spoke, Silver, Plastic, Set Of 4 (Part No.IWC52217S)

Huf North America – Tire Pressure Monitoring System (TPMS) Sensor (Part No.UVS7051)

Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, OEM Style, 0.553" Length, Chrome, 4 Pack (Part No.711-832)

McGard – SplineDrive Lug Nut Installation Tool for McGard SplineDrive Lug Nuts (Part No.65300)

Schrader – TPMS Service Kit 34000 (Schrader Alum Valve Assembly) (Part No.34000)

Schrader – TPMS Service Pk 20018 (Schrader Snap-In Valve Assembly) (Part No.20018)

Autel – MX-Sensor Component Kit (Part No.MXSENSORCK)

Dorman – Wheel Lug Nut and Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" L, Orange, 16 Nuts/4 Locks/1 Key (Part No.711-335I)

Dorman – Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.421" Length, Chrome, 4 Locks/1 Key (Part No.711-321)

Dorman – Wheel Stud: Serrated, M12-1.50 Thread Size, Right Hand Thread, 1 Pack (Part No.610-547.1)

Dorman – Wheel Stud: Serrated, M12-1.50 Thread Size, Right Hand Thread (sold by each) (Part No.610-547)

Dill Air Control – Tpms Snap-In Valve With T10 Screw (Part No.VS950)

Continental – TPMS Service Kit (Part No.SE54188)

REDI-Sensor – TPMS Service Kit (Part No.SE54191)

Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.68058766AA)

Dodge Journey Wheels and Tires Categories

Helping You Find the Right Wheels and Tires for Your Dodge Journey

Top Wheels and Tires Brands for Your Dodge Journey

Top-Rated Dorman Wheels and Tires

Leading Dorman Wheels and Tires

FAQs for Dodge Journey Wheels and Tires

What are the most purchased Wheels and Tires for the Dodge Journey?

What are the top-rated Dodge Journey Wheels and Tires?

Find Your Dodge Journey Wheels and Tires by Year

More Popular Parts for All Makes