Dodge Dakota Brake Master Cylinder

Your Dodge Dakota will be happy to know that the search for the right Brake Master Cylinder products you’ve been looking for is over! Advance Auto Parts has 15 different Brake Master Cylinder for your vehicle, ready for shipping or in-store pick up. The best part is, our Dodge Dakota Brake Master Cylinder products start from as little as $23.79.

When it comes to your Dodge Dakota, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Brake Master Cylinder product and part brands so you can shop with complete confidence. Some of our top Brake Master Cylinder product brands are Carquest Wearever, and Wearever. We’re sure you will get the right product to keep that Dakota running for a long time.

We even have reviews of our OEM and aftermarket Brake Master Cylinder products to help you buy with confidence. Hear from other customers via the 608 reviews on parts for your Dodge Dakota.

Shop online, find the best price on the right product, and have it shipped right to your door. If you prefer to shop in person for the right Brake Master Cylinder products for your Dakota, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time!

Brake Master Cylinder for a Dodge Dakota

Use the fitment form at the top of the page to select your exact year and engine type for your Dodge Dakota.

Carquest Wearever - Master Cylinder - New (Part No. MCA390378)
Description
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:
All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
Key components like spring are from high and stable quality suppliers.
Products are machined by CNC machines with strictly quality control.
Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
Direct replacement for a proper fit
Manufactured to strict engineering quality standards, meets S.A.E. specifications
Each product is 100% tested on production lines and sampling tested prior to shipment
Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.038 mm
Main cylinder hole of measured by the 0.034 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing

4.5

Read 3 review(s)

Review snapshot ® by PowerReviews

4.5

4.5

5

5

2018-06-22

5

5

I would buy the product again, BUT have a lifetime warranty!

I would buy the product again, BUT have a lifetime warranty!

Submitted 2018-06-22

By Kenneth

From undisclosed

Seems to be a very good quality and fit perfect. Did not like the pressure bleeding they provided for it since it only had two plugs which I could not get to hold pressure when pressing the petal to remove the air. I use the old way with the returning tubes to get the air out. Worked great and good petal pressure. Worth the extra money for the new reservoir installed. Mine was very dirty and difficult to clean with all the weirs inside of it.

Bottom Line

Seems to be a very good quality and fit perfect. Did not like the pressure bleeding they provided for it since it only had two plugs which I could not get to hold pressure when pressing the petal to remove the air. I use the old way with the returning tubes to get the air out. Worked great and good petal pressure. Worth the extra money for the new reservoir installed. Mine was very dirty and difficult to clean with all the weirs inside of it.

By Kenneth from undisclosed

BOTTOM LINE

5

5

2013-12-13

5

5

New Master Cylinder

New Master Cylinder

Submitted 2013-12-13

By Mikanic

From Westminster, MD

Very easy to install with no issues. Very solid product built to oem specs.

Bottom Line recommended

Very easy to install with no issues. Very solid product built to oem specs.

By Mikanic from Westminster, MD

BOTTOM LINE recommended

4

4

2012-08-12

4

4

Fit like OEM part.

Fit like OEM part.

Submitted 2012-08-12

By Tom Breakwater

From N. Florida

Fit like OEM part. Hoses and adapters for bench bleeding were provided. It was easy to install. Took about 1 hour to install and 2 hours to bleed brake system. Recommend buying a pressure bleeding tool if you are working by yourself.

Bottom Line recommended

Fit like OEM part. Hoses and adapters for bench bleeding were provided. It was easy to install. Took about 1 hour to install and 2 hours to bleed brake system. Recommend buying a pressure bleeding tool if you are working by yourself.

By Tom Breakwater from N. Florida

BOTTOM LINE recommended
from $119.99
View Product
Carquest Wearever - Master Cylinder - New (Part No. MCA39638)
Description
All master cylinders meet or exceed O.E. form, fit and function.

4.5

Read 3 review(s)

Review snapshot ® by PowerReviews

4.5

4.5

5

5

2018-10-16

5

5

yes

yes

Submitted 2018-10-16

By AG

From Undisclosed

good

Bottom Line

good

By AG from Undisclosed

BOTTOM LINE

5

5

2018-01-31

5

5

iwould buy from this company again

iwould buy from this company again

Submitted 2018-01-31

By JAMES

From undisclosed

great product

Bottom Line

great product

By JAMES from undisclosed

BOTTOM LINE

5

5

2018-01-20

5

5

Great Master cylinder

Great Master cylinder

Submitted 2018-01-20

By Steven

From undisclosed

This of course is much needed on our vehicles and it performs wonderful !

Bottom Line

This of course is much needed on our vehicles and it performs wonderful !

By Steven from undisclosed

BOTTOM LINE
from $48.99
View Product
Carquest Wearever - Master Cylinder - New (Part No. MCA134437)
Description
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All aluminum castings are "hard anodized"
All iron castings are coated to prevent rust
Manufacturers all major components in house.
Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
All machining done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
Assembly is done in clean room insuring no contamination is introduced into final assembly.
All assemblies are dated coded for 100% accurate trace-ability.
Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance

4.0

Read 3 review(s)

Review snapshot ® by PowerReviews

4.0

4.0

5

5

2018-03-20

5

5

I would buy this again

I would buy this again

Submitted 2018-03-20

By Steve

From undisclosed

So far it works great

Bottom Line

So far it works great

By Steve from undisclosed

BOTTOM LINE

5

5

2018-02-11

5

5

Yes

Yes

Submitted 2018-02-11

By Pedro

From undisclosed

Great

Bottom Line

Great

By Pedro from undisclosed

BOTTOM LINE

1

1

2018-01-18

1

1

I would not buy this product again.

I would not buy this product again.

Submitted 2018-01-18

By Bobby

From undisclosed

the plugs supplied wouldn't hold pressure so it couldn't be bench bled. Had to bleed the system.

Bottom Line

the plugs supplied wouldn't hold pressure so it couldn't be bench bled. Had to bleed the system.

By Bobby from undisclosed

BOTTOM LINE
from $96.99
View Product
Wearever - Master Cylinder - Domestic (Part No. 10-2708)
Description
A1 CARDONE Remanufactured Master Cylinders provide reliable performance at the best price. All units are tested before leaving the factory to ensure like-new performance, providing a quality product you and your vehicle can rely on. Bleeding kits are provided for your convenience, allowing you to spend less time in the garage, and more time on the road. Couple this with CARDONE's Master Cylinder Bench Bleeder Tool, which cuts typical bleeding procedures in half.

Product Features:
100% computer testing ensures guaranteed, consistent performance
100% new OE-quality seals and cups are installed to prevent leakage and ensure like-new performance and reliability. All rubber meets S.A.E. specifications.
Bleeding tubes are supplied with applicable applications to make the bleeding process faster and easier
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, which could cause premature failure
Cast iron master cylinders come with premium protective coating to minimize rust, extending on-car and on-shelf life
Piston assemblies are 100% height-gauged to meet or exceed O.E.M. performance
Plastic reservoirs are 100% vacuum-tested to ensure proper function

4.0

Read 3 review(s)

Review snapshot ® by PowerReviews

4.0

4.0

5

5

2018-08-29

5

5

Great

Great

Submitted 2018-08-29

By Alexander

From Undisclosed

Works well, bled fast and the vehicle now has a great pedal again.

Bottom Line

Works well, bled fast and the vehicle now has a great pedal again.

By Alexander from Undisclosed

BOTTOM LINE

4

4

2018-06-09

4

4

Would purchase again.

Would purchase again.

Submitted 2018-06-09

By Jason

From undisclosed

Installed pretty easy. Seems to be working well.

Bottom Line

Installed pretty easy. Seems to be working well.

By Jason from undisclosed

BOTTOM LINE

4

4

2017-12-20

4

4

It is okay

It is okay

Submitted 2017-12-20

By Lucas

From undisclosed

Next time I will buy the cylinder with the canisters. Remove old canister was a little complicated: remove little rods and the canister per C. Savings vs more work. But fit/works fine to my cherokee '95.

Bottom Line

Next time I will buy the cylinder with the canisters. Remove old canister was a little complicated: remove little rods and the canister per C. Savings vs more work. But fit/works fine to my cherokee '95.

By Lucas from undisclosed

BOTTOM LINE
from $63.99
View Product
Wearever - Master Cylinder - Domestic (Part No. 10-2967)
Description
A1 CARDONE Remanufactured Master Cylinders provide reliable performance at the best price. All units are tested before leaving the factory to ensure like-new performance, providing a quality product you and your vehicle can rely on. Bleeding kits are provided for your convenience, allowing you to spend less time in the garage, and more time on the road. Couple this with CARDONE's Master Cylinder Bench Bleeder Tool, which cuts typical bleeding procedures in half.

Product Features:
100% computer testing ensures guaranteed, consistent performance
100% new OE-quality seals and cups are installed to prevent leakage and ensure like-new performance and reliability. All rubber meets S.A.E. specifications.
Bleeding tubes are supplied with applicable applications to make the bleeding process faster and easier
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, which could cause premature failure
Cast iron master cylinders come with premium protective coating to minimize rust, extending on-car and on-shelf life
Piston assemblies are 100% height-gauged to meet or exceed O.E.M. performance
Plastic reservoirs are 100% vacuum-tested to ensure proper function

3.0

Read 2 review(s)

Review snapshot ® by PowerReviews

3.0

3.0

1

1

2016-11-09

1

1

Defective constantly! Caused me to spend more money!!!

Defective constantly! Caused me to spend more money!!!

Submitted 2016-11-09

By R.L

From Cedar Springs

Bad on more than one occasion for myself, buy the new one with reservoir instead!!

Bottom Line not recommended

Bad on more than one occasion for myself, buy the new one with reservoir instead!!

By R.L from Cedar Springs

BOTTOM LINE not recommended

5

5

2013-03-05

5

5

Good Buy For price

Good Buy For price

Submitted 2013-03-05

By Ben

From albemarle nc

Just good price and quality

Bottom Line recommended

Just good price and quality

By Ben from albemarle nc

BOTTOM LINE recommended
from $67.99
View Product
Carquest Wearever - Master Cylinder - New (Part No. MCA630025)
Description
Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:
All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
Key components like spring are from high and stable quality suppliers.
Products are machined by CNC machines with strictly quality control.
Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
Direct replacement for a proper fit
Manufactured to strict engineering quality standards, meets S.A.E. specifications
Each product is 100% tested on production lines and sampling tested prior to shipment
Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.029 mm
Main cylinder hole of measured by the 0.025 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
from $169.99
View Product
World Brake Resources - Brake Master Cylinder (Part No. N3000192769WBR)
Description
WBR premium hydraulic brake cylinders are manufactured on state-of-the-art CNC machines, matching the exact OEM design with materials that meet the strict TS 16949 OEM certification. WBR brake master cylinders, wheel cylinders, clutch master and slave units use lightweight aluminum or cast iron to match the original design. The EPDM rubber used in WBR cylinders is a long-life formulation, 100% compatible with all types of brake fluid.

Product Features:
Manufactured on state-of-the-art CNC machines
OEM design and materials
TS 16949 OEM certification
100% compatible with all types of brake fluid
from $125.87
View Product
World Brake Resources - Brake Master Cylinder (Part No. N3000155684WBR)
Description
WBR premium hydraulic brake cylinders are manufactured on state-of-the-art CNC machines, matching the exact OEM design with materials that meet the strict TS 16949 OEM certification. WBR brake master cylinders, wheel cylinders, clutch master and slave units use lightweight aluminum or cast iron to match the original design. The EPDM rubber used in WBR cylinders is a long-life formulation, 100% compatible with all types of brake fluid.

Product Features:
Manufactured on state-of-the-art CNC machines
OEM design and materials
TS 16949 OEM certification
100% compatible with all types of brake fluid
from $116.96
View Product
WBR - Brake Master Cylinder (Part No. N3000193042WBR)
Description
WBR premium hydraulic brake cylinders are manufactured on state-of-the-art CNC machines, matching the exact OEM design with materials that meet the strict TS 16949 OEM certification. WBR brake master cylinders, wheel cylinders, clutch master and slave units use lightweight aluminum or cast iron to match the original design. The EPDM rubber used in WBR cylinders is a long-life formulation, 100% compatible with all types of brake fluid.

Product Features:
Manufactured on state-of-the-art CNC machines
OEM design and materials
TS 16949 OEM certification
100% compatible with all types of brake fluid
from $104.33
View Product
Carquest Wearever - Master Cylinder - New (Part No. MCA630026)

Description
All master cylinders meet or exceed O.E. form, fit and function.

from $90.99
View Product
Carquest Wearever - Master Cylinder - New (Part No. MCA390188)
Description
Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:
Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
All aluminum castings are "hard anodized"
All iron castings are coated to prevent rust
Manufacturers all major components in house.
Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
All machining done by computer programed CNC machines.
Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
Assembly is done in clean room insuring no contamination is introduced into final assembly.
All assemblies are dated coded for 100% accurate trace-ability.
Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance
from $85.99
View Product
World Brake Resources - WBR Brake Master Cylinder (Part No. N3000168759WBR)
Description
WBR premium hydraulic brake cylinders are manufactured on state-of-the-art CNC machines, matching the exact OEM design with materials that meet the strict TS 16949 OEM certification. WBR brake master cylinders, wheel cylinders, clutch master and slave units use lightweight aluminum or cast iron to match the original design. The EPDM rubber used in WBR cylinders is a long-life formulation, 100% compatible with all types of brake fluid.

Product Features:
Manufactured on state-of-the-art CNC machines
OEM design and materials
TS 16949 OEM certification
100% compatible with all types of brake fluid
from $59.39
View Product
Wearever - Master Cylinder - Domestic (Part No. 10-3252)
Description
A1 CARDONE Remanufactured Master Cylinders provide reliable performance at the best price. All units are tested before leaving the factory to ensure like-new performance, providing a quality product you and your vehicle can rely on. Bleeding kits are provided for your convenience, allowing you to spend less time in the garage, and more time on the road. Couple this with CARDONE's Master Cylinder Bench Bleeder Tool, which cuts typical bleeding procedures in half.

Product Features:
100% computer testing ensures guaranteed, consistent performance
100% new OE-quality seals and cups are installed to prevent leakage and ensure like-new performance and reliability. All rubber meets S.A.E. specifications.
Bleeding tubes are supplied with applicable applications to make the bleeding process faster and easier
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, which could cause premature failure
Cast iron master cylinders come with premium protective coating to minimize rust, extending on-car and on-shelf life
Piston assemblies are 100% height-gauged to meet or exceed O.E.M. performance
Plastic reservoirs are 100% vacuum-tested to ensure proper function
from $56.99
View Product
Wearever - Master Cylinder - Domestic (Part No. 10-2612)
Description
A1 CARDONE Remanufactured Master Cylinders provide reliable performance at the best price. All units are tested before leaving the factory to ensure like-new performance, providing a quality product you and your vehicle can rely on. Bleeding kits are provided for your convenience, allowing you to spend less time in the garage, and more time on the road. Couple this with CARDONE's Master Cylinder Bench Bleeder Tool, which cuts typical bleeding procedures in half.

Product Features:
100% computer testing ensures guaranteed, consistent performance
100% new OE-quality seals and cups are installed to prevent leakage and ensure like-new performance and reliability. All rubber meets S.A.E. specifications.
Bleeding tubes are supplied with applicable applications to make the bleeding process faster and easier
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, which could cause premature failure
Cast iron master cylinders come with premium protective coating to minimize rust, extending on-car and on-shelf life
Piston assemblies are 100% height-gauged to meet or exceed O.E.M. performance
Plastic reservoirs are 100% vacuum-tested to ensure proper function
from $41.49
View Product
Wearever - Master Cylinder - Domestic (Part No. 10-2393)
Description
A1 CARDONE Remanufactured Master Cylinders provide reliable performance at the best price. All units are tested before leaving the factory to ensure like-new performance, providing a quality product you and your vehicle can rely on. Bleeding kits are provided for your convenience, allowing you to spend less time in the garage, and more time on the road. Couple this with CARDONE's Master Cylinder Bench Bleeder Tool, which cuts typical bleeding procedures in half.

Product Features:
100% computer testing ensures guaranteed, consistent performance
100% new OE-quality seals and cups are installed to prevent leakage and ensure like-new performance and reliability. All rubber meets S.A.E. specifications.
Bleeding tubes are supplied with applicable applications to make the bleeding process faster and easier
Bores meet critical micro-finish specifications to eliminate pitting and corrosion, which could cause premature failure
Cast iron master cylinders come with premium protective coating to minimize rust, extending on-car and on-shelf life
Piston assemblies are 100% height-gauged to meet or exceed O.E.M. performance
Plastic reservoirs are 100% vacuum-tested to ensure proper function
from $23.79
View Product