Dodge D350 Pickup Carburetor Parts

Edelbrock Transfer Tube O-Rings Pair No. 12416 Will Fit Holley 4150, 4160, 4165 &4175 Series Carb

The Edelbrock No. 12685 Single Stage 8.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.

The Edelbrock #12635 Single Stage 3.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation

Product Features:

• Gasket Or Seal Included
• 3.5 in. Hg Opening Vacuum
• Single Stage
• Standard Flow Type
• Made In The USA

The Edelbrock 94 Carburetor power valve block off #12624 is a great way to fine tune your vintage series carburetor. These Edelbrock Power valve Block Off’s will fit Edelbrock Vintage Series 94 carburetors as well as original Holley 94’s and its later var

Product Features:

• Fits Any Demon®, Holley®, And Quick Fuel® Carburetors
• Includes Gasket
• 1/2 in. x 28 Power Valve Thread
• For Applications That Prefer To Run Carbs Without The Power Valves
• Made In The USA

The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.

Product Features:

• Gold Dichromate Finish For Corrosion Resistance w/Classic Look
• Performance Upgrade For Stock To Mildly Modified Vehicles
• Universal calibration for easy bolt-on performance
• Man. Choke Cable Hand Controlled For Cold Start Control
• Vacuum Secondaries For Use On Wide Variety Of Vehicles
• Dual feed fuel inlets for constant high volume fuel delivery
• Power Valve Blow Out Protection
• 100% Wet Flow Tested By Holley Technicians
• Arrives Ready To Run

The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:

• Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
• Manual Choke
• 4 Barrel Count
• Square Bore
• Smooth Secondary Transition
• Both Timed and Full Vacuum Ports
• Includes PCV Outlet

4150 Race Carbs

The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45

Product Features:

• Fits Holley® Carburetors With Center Hung Fuel Bowl
• Includes Adjusting Nut
• Includes Locking Screw
• Includes O-Ring
• Includes Washers

The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23

Product Features:

• Center Hung Floats
• 0.11 in. Needle Diameter
• Viton® Needle Material
• Sold Individually
• Non-Adjustable Type

The Edelbrock 94 No. 12462 Carburetor Jets .062″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

The Edelbrock 94 No. 12471 Carburetor Jets .071″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

The Edelbrock 94 No. 12474 Carburetor Jets .074″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

The Edelbrock 94 No. 12466 Carburetor Jets .066″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

The Edelbrock 94 No. 12479 Carburetor Jets .079″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

The Edelbrock No. 12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 carburetors. Kit includes two black nitrile fuel bowl gaskets.

Product Features:

• The Edelbrock No: 12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 Carburetors.
• Kit includes two black nitrile fuel bowl gaskets.

The Edelbrock #12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock #12371 fits Holley 4160 carburetors.

Product Features:

• Nitrile Rubber Material
• Metering Block Type
• Set of 4
• Fits Holley® 4160 Carburetors
• Made In The USA

The Edelbrock #12370 comes with fuel bowl and metering block gaskets. The Edelbrock #12370 is designed to be used with Holley 2300, 4150, 4160, 4165, and some 4500 carburetors.

Product Features:

• Nitrile Rubber Material
• Metering Block, Fuel Bowl Type
• Set of 4
• Fits Holley® 2300, 4150, 4160, 4165, And Some 4500 Carburetors
• Made In The USA

The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline No: 12400 for 4150 Carburetors Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage

Product Features:

• The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline No: 12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
• Improper installation will void your warranty and may result in poor performance and engine or vehicle damage

Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.

Product Features:

• Rubber Material
• For Holley®, Barry Grant, And Demon Gasoline Carburetors
• No Hardware Included
• 50cc Volume
• Made iIn The USA