Dodge D200 Series Performance and Racing Products

Please Select your Vehicle to See Exact Fit Parts

Essential Dodge D200 Series Performance and Racing Products

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$34.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Earls Performance Product – Brake Bleeder Screws (Part No.280035ERL)

Brake Bleeder Screws

from

$40.49
Brake Bleeder Screws

Mallory – Distributor Condenser (Part No.401)

Distributor Condenser

from

$19.29
Distributor Condenser

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1414)

Exhaust Manifold Gasket Set

from

$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Performer RPM Series fuel pump is for Big-Block Chrysler (Part No.1723)

Performer RPM Series fuel pump is for Big-Block Chrysler

from

$205.99
Edelbrock part #1723 Performer RPM Series fuel pump is for Big-Block Chrysler designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high-performance’s street Fuel Pumps feature a high quality three stage po
See More

Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

VALVE SEALS, TEFLON 3/8" 1 ST

from

$33.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:
  • Work with .530″ guides and 3/8″ valve stem diameter
  • Valve stem oil seals keep unwanted oil from entering the combustion chamber
  • Several different types of valve seals are offered
See More

Mr. Gasket – Precision Timing Tape (Part No.1593)

Precision Timing Tape

from

$22.29
Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

Product Features:
  • 7 1¿4″ diameter
  • 7 1┐4″ diameter
  • 383 thru 440 cu. in.
  • Increased Performance
  • Set Valve Lash At Proper Time
See More

Competition Cams – Magnum 231/231 Hydraulic Flat Cam (Part No.21-237-4)

Magnum 231/231 Hydraulic Flat Cam

from

$297.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:
  • Best with aftermarket torque converters and 9.5:1 compression.
  • Great high RPM power.
  • Easy on valve train parts.
  • Can be used with mild ratio rocker arms and traditional performance valve springs.
See More

MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)

Blaster 2 Coil: High Performance Ignition Upgrade

from

$55.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

Product Features:
  • Improved output coil for electronic ignitions
  • Works w/Blaster Ignition Or MSD 5/6/7 Series
  • Ballast Resistor Required If Used w/Stock Points Ignition
  • Alkyd tower w/high dielectric properties lessens carbon tracking
See More

Edelbrock – Water Pump #8814 For 1958-79 BB Chrysler 361-440, Standard Rotation, Satin (Part No.8814)

Water Pump #8814 For 1958-79 BB Chrysler 361-440, Standard Rotation, Satin

from

$249.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1540)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$149.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
  • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
  • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
  • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
See More

Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Chrysler (Part No.7366)

Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Chrysler

from

$135.99
Product Features:
  • Head: 4.505″ Bore/0.038″ Thick/9.69cc Vol.
  • Intake: 1.23″x2.27″ Port/.030″ Thick
  • Exhaust: 1.84″x1.33″ Port
  • 3/16″ Valve Cover
  • Multi Piece Configuration
See More

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

from

$20.79
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:
  • Zinc plated to resist corrosion and provide a clean professional appearance
  • Made from Grade 5 steel for strength and durability
  • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
  • Allen (socket) Head
  • Zinc Plated For Protection
See More

Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.2503)

Chrome Distributor Hold-Down Clamp

from

$15.79
Competition design uses a stud, washer & nut to secure the clamp rather than a bolt. The clamp itself is also chromed.

Product Features:
  • Rolled Edges For Strength
  • Ideal For Magnetos
  • Ideal For Ignition Distributor
See More

Richmond Gear – RngPnn (Part No.CR925410)

RngPnn

from

$185.99
RngPnn

Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-601-4)

Mutha' Thumpr 235/249 Hydraulic Flat Cam and Lifter Kit

from

$403.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
  • Best with aftermarket converters and more rear gear.
  • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
See More

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2947)

Engine Crankshaft Seal Kit

from

$48.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Dust Cap (Part No.2485)

Dust Cap

from

$14.29
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.

Product Features:
  • Chrome Plated Steel
  • Set of 2 Caps
  • Easy Installation
  • 2 Per Set
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 6 Piece Set (Part No.1243)

Lower Intake Manifold Gasket Set: 6 Piece Set

from

$43.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)

Unilite Breakerless Ignition Conversion Kit

from

$179.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

Edelbrock – RPM Air-Gap Small Block Chrysler Black Intake Manifold (Part No.75763)

RPM Air-Gap Small Block Chrysler Black Intake Manifold

from

$643.99
Edelbrock part #75763 RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8’s and 318 c.i.d. engines with 340-360 cylinder heads. The RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competit

Product Features:
  • 1500-6500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 4.9 in. Front Height, 5.35 in. Center Height, 5.8 in. Rear Height
  • Black Powder Coated Finish
  • Made In The USA
See More

Mr. Gasket – Valve Cover (Part No.9807)

Valve Cover

from

$111.99
Made of chrome plated steel. Smooth top with original equipment height and internal baffle. Features one breather/oil filler cap opening per valve cover. Hardware and gaskets sold separately.

Product Features:
  • Fits Chrysler big block
  • Chrome plated steel construction
  • Sold as a pair
  • Long Lasting Durability
  • Cadmium Plated To Resist Corrosion
  • Easy Installation
See More

Mr. Gasket – Valve Cover (Part No.9806)

Valve Cover

from

$96.99
Chrome plated stamped steel valve covers have a flat smooth top, with internal baffles. Tall-style cover provides extra valve train clearance. Sold as a pair. Will not fit Magnum style heads.

Product Features:
  • Fits Chrysler small block (pre-Magnum style heads)
  • Chrome plated steel
  • Tall-style covers provide extra clearance
  • Sold as a pair
  • Cadmium Plated To Resist Corrosion
  • Easy Installation
See More

FEL-PRO Performance – Engine Oil Pan Gasket Set (Part No.1805)

Engine Oil Pan Gasket Set

from

$21.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1808)

PERFORMANCE OIL PAN GASKET SET

from

$18.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Helping You Find the Right Performance and Racing Products for Your Dodge D200 Series

You love your D200 Series. So we’ve made it easier than ever to help you find Dodge D200 Series Performance and Racing Products in our online catalog. Our inventory holds 143 aftermarket and OEM Performance and Racing Products for your Dodge D200 Series, ranging from $8.99 to $1,398.99.

We offer parts from 12 brands trusted to make quality Performance and Racing Products for your Dodge D200 Series. Before you buy, take some time to read through customer reviews. We currently have 725 reviews of Dodge D200 Series Performance and Racing Products from previous customers. Some of the top rated parts include Automatic Shifter, Z-Gate with 4.4 stars and Unilite Ignition Module with 5.0 stars.

Find your D200 Series Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge D200 Series part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Performance and Racing Products Brands for Your Dodge D200 Series

Our inventory holds Performance and Racing Products for your Dodge D200 Series from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like Mr. Gasket, FEL-PRO Performance, and B & M, all of which can keep that Dodge happy.
We have Competition Cams parts available for your Dodge D200 Series in categories like Performance Engines. Some of the top-rated Competition Cams parts in these categories are:
VALVE SEALS, TEFLON 3/8" 1 ST
from $33.99
(1)
VALVE SEALS, TEFLON 3/8" 1 ST
Performance Engine Valve Stem Seal Sets

Top-Rated MSD Ignition Performance and Racing Products

Leading MSD Ignition Performance and Racing Products

We carry MSD Ignition brand parts for your Dodge D200 Series across several catalog categories, including Performance Ignition Products. Some of our most reviewed MSD Ignition parts include:
Blaster 2 Coil: High Performance Ignition Upgrade
from $55.99
(20)
Blaster 2 Coil: High Performance Ignition Upgrade
Performance Coils

FAQs for Dodge D200 Series Performance and Racing Products

What are the most purchased Performance and Racing Products for the Dodge D200 Series?

Out of 143 Performance and Racing Products for the Dodge D200 Series, the most popular in our inventory are:
Intake Manifold Bolts
from $18.29
(12)
Intake Manifold Bolts
Performance Intake Manifolds
High Performance Thermostat
from $32.49
This product is not rated
High Performance Thermostat
Performance Engine Coolant Thermostats
High Performance Thermostat
from $31.99
This product is not rated
High Performance Thermostat
Performance Engine Coolant Thermostats

What are the top-rated Dodge D200 Series Performance and Racing Products?

Top-rated Performance and Racing Products for your Dodge D200 Series based on customer reviews/ratings are:
Automatic Shifter, Z-Gate
from $306.99
(11)
Automatic Shifter, Z-Gate
“Great shifter”
Unilite Ignition Module
from $95.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
PERFORMANCE OIL PAN GASKET SET
from $18.49
(3)
PERFORMANCE OIL PAN GASKET SET
“Great gasket compared to cork. Much more durable but still inexpensive.”