Dodge Coronet Suspension Parts
Top Dodge Coronet Suspension Parts Categories
We carry over 64 Suspension Parts in inventory for the Dodge Coronet. If you’re looking for aftermarket Suspension Parts for your Dodge Coronet, check out all these categories:
Essential Dodge Coronet Suspension Parts
Rare Parts – Shock Absorber Stud (Part No.RP15625)
from
$47.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle control & handling Reduces tire wear Increases the Life of Other Steering and Suspension Components
MOOG – Control Arm Offset Bushing Kit (Part No.K7103)
from
$46.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Eccentric bushing kit provides additional positive camber
- Bushings manufactured from high quality elastomer compounds for durability and ride performance
- Elastomer compounds do not utilize any reground rubber fillers
- High level bonding adhesive is used for durability
- Bushings assembled with proper precompression for ultimate in performance and feel
Energy Suspension – Leaf Spring Bushing Set (Part No.5.2101R)
from
$79.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Rare Parts – Spring Bolt Kit (Part No.RP35303)
from
$144.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Grade 5 or higher bolt/pin
- No Squeak
- Reduces vibration
- Reduces vibration
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)
from
$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Rare Parts – Control Arm Shaft Kit (Part No.RP22971)
from
$112.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Complete kit for 1 arm
- Heat treated steel bushings OR torsional rubber bushings
- Reduces vibration
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)
from
$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
MOOG – Control Arm Bumper (Part No.K3180)
from
$13.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Loose or worn chassis parts can lead to premature tire wear
- Incorporates proven design and engineering features
Energy Suspension – Leaf Spring Pad (Part No.5.6105G)
Monroe – Load Adjusting Shock Absorber (Part No.58567)
from
$125.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.
Product Features:
See More
Product Features:
- REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
- EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
- LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
- 5/8 nitrocarburized rod for long service life.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
MOOG – Leaf Spring Bumper (Part No.K7293)
from
$7.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Rare Parts – Shackle Assembly (Part No.RP35436)
from
$64.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with shackle plates and bushings
- No Squeak
- Rubber or Heat Treated bushings
- Restores ride height
KYB – High Pressure Monotube Gas Shock (Part No.KG5512)
from
$56.99
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
Product Features:
See More
Product Features:
- Adds Up To 25% More Damping Performance Over Original Equipment Shocks
- Components And Valving Designed Specifically For Classic Mopars
- Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
- High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
- Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
- The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
Energy Suspension – Hyper-Flex System (Part No.5.18105G)
from
$228.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Monroe – Max-Air Air Shock Absorber (Part No.MA727)
from
$106.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
- EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
Energy Suspension – Universal Bump Stop (Part No.9.9119R)
from
$13.99
Helps prevent damaging and expensive suspension component contact. Many styles to choose from – for many application requirements. Many feature a specially designed mechanical interlock, a course threaded stud and strong nylon locking nut system. Many uses that are too numerous to list here.
Product Features:
See More
Product Features:
- Specially Designed Mechanical Interlock
- Unlimited Uses
Energy Suspension – Universal Bump Stop (Part No.9.9103R)
from
$12.99
Helps prevent damaging and expensive suspension component contact. Many styles to choose from – for many application requirements. Many feature a specially designed mechanical interlock, a course threaded stud and strong nylon locking nut system. Many uses that are too numerous to list here.
Product Features:
See More
Product Features:
- Specially Designed Mechanical Interlock
- Unlimited Uses
Energy Suspension – Universal Bump Stop (Part No.9.9119G)
from
$13.99
Helps prevent damaging and expensive suspension component contact. Many styles to choose from – for many application requirements. Many feature a specially designed mechanical interlock, a course threaded stud and strong nylon locking nut system. Many uses that are too numerous to list here.
Product Features:
See More
Product Features:
- Specially Designed Mechanical Interlock
- Unlimited Uses
Energy Suspension – Universal Bump Stop (Part No.9.9103G)
from
$12.99
Helps prevent damaging and expensive suspension component contact. Many styles to choose from – for many application requirements. Many feature a specially designed mechanical interlock, a course threaded stud and strong nylon locking nut system. Many uses that are too numerous to list here.
Product Features:
See More
Product Features:
- Specially Designed Mechanical Interlock
- Unlimited Uses
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)
from
$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)
from
$25.99
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Rare Parts – Outer Pivot Pin (Part No.RP15390)
from
$172.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores OE alignment
- Heat treated pin and bushing
- Aids in alignment of vehicle
- Reduces tire wear
Rare Parts – Outer Pivot Pin (Part No.RP15388)
from
$167.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores OE alignment
- Heat treated pin and bushing
- Aids in alignment of vehicle
- Reduces tire wear
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5752)
from
$36.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.56002)
from
$36.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.
Product Features:
See More
Product Features:
- Available for import and domestic passenger cars
- Gas-charged unit
- Improved handling and control
- Economical OE replacement
- Meets OE product specifications
Dodge Coronet Suspension Parts Categories
Helping You Find the Right Suspension Parts for Your Dodge Coronet
You love your Coronet. So we’ve made it easier than ever to help you find Dodge Coronet Suspension Parts in our online catalog. Our inventory holds 64 aftermarket and OEM Suspension Parts for your Dodge Coronet, ranging from $4.99 to $338.99.
We offer parts from 8 brands trusted to make quality Suspension Parts for your Dodge Coronet. Before you buy, take some time to read through customer reviews. We currently have 13,414 reviews of Dodge Coronet Suspension Parts from previous customers. Some of the top rated parts include Monroe Shock Absorber Air Hose Kit with 2.8 stars and Max-Air Air Shock Absorber with 4.5 stars.
Find your Coronet Suspension Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge Coronet part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Suspension Parts Brands for Your Dodge Coronet
Our inventory holds Suspension Parts for your Dodge Coronet from 8 trusted brands. You’ll find OEM and aftermarket parts from brands like Monroe, KYB, and Moog, all of which can keep that Dodge happy.
We have MOOG parts available for your Dodge Coronet in categories like Control Arms. Some of the top-rated MOOG parts in these categories are:
Top-Rated Monroe Suspension Parts
Leading Monroe Suspension Parts
We carry Monroe brand parts for your Dodge Coronet across several catalog categories, including Shocks and Struts. Some of our most reviewed Monroe parts include:
FAQs for Dodge Coronet Suspension Parts
What are the most purchased Suspension Parts for the Dodge Coronet?
Out of 64 Suspension Parts for the Dodge Coronet, the most popular in our inventory are:
What are the top-rated Dodge Coronet Suspension Parts?
Top-rated Suspension Parts for your Dodge Coronet based on customer reviews/ratings are:
from
$106.99
(4)
Max-Air Air Shock Absorber
“These fit stepdown Hudsons . Good for leveling up car.”
from
$61.99
(2)
High Pressure Monotube Gas Shock
“I installed them on my 69 Roadrunner pro touring car, for the price they are great”
