Dodge Charger Carburetor Parts

Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!

Edelbrock No: 12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage

The Edelbrock No. 12685 Single Stage 8.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.

Edelbrock Transfer Tube O-Rings Pair No. 12416 Will Fit Holley 4150, 4160, 4165 &4175 Series Carb

“The Edelbrock No: 12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “”lift”” will directly affects the accelerator pump stroke and pump capacity. While the cam ramp profile and/or shape will control the “”timing”” of the shot. Each kit comes with 8 different accelerator pump cams and will fit Holley 2300, 4150 and 4160 carburetors.”

Edelbrock Performer EPS Series 1406 carburetor calibration kit

The Edelbrock No: 12404 Vacuum Secondary Diaphragm is a replacement service part for popular high performance Quick Fuel, Holley and Demon carburetors.

The Edelbrock No: 12412 Vacuum Secondary Spring Kit includes 7 springs that will fit on Holley 4150, 4150HP, 4160 series and various Demon Carburetors.

Edelbrock Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip.

The Edelbrock No: 12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon carburetors.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

The Edelbrock No: 12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock No: 12371 fits Holley 4160 carburetors.

Holley REPLACEMENT MAIN BODY KIT FOR 0-80457S, 134-342.

“Introducing the Holley EFI Wiring Shop. We have one goal, to provide you a one stop solution for all of your wiring components needs. From connectors and pins to wire loom and tools. We have everything you need to build or service your Holley EFI powered machine. Black Nylon braided wire loom from 1/8″” to 2″” and every connector (pins/seals/TPA included) we utilize on our main harnesses are now available.”

“Introducing the Holley EFI Wiring Shop. We have one goal, to provide you a one stop solution for all of your wiring components needs. From connectors and pins to wire loom and tools. We have everything you need to build or service your Holley EFI powered machine. Black Nylon braided wire loom from 1/8″” to 2″” and every connector (pins/seals/TPA included) we utilize on our main harnesses are now available.”

“Introducing the Holley EFI Wiring Shop. We have one goal, to provide you a one stop solution for all of your wiring components needs. From connectors and pins to wire loom and tools. We have everything you need to build or service your Holley EFI powered machine. Black Nylon braided wire loom from 1/8″” to 2″” and every connector (pins/seals/TPA included) we utilize on our main harnesses are now available.”

Edelbrock Standard Main Jet Carburetor Metering Jet #12456 Size .055 (Pair).

“The Edelbrock 94 No. 12463 Carburetor Jets .063″”Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.”

“The Edelbrock 94 No. 12469 Carburetor Jets .069″”Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.”

The Edelbrock #1902 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1902 is calibrated for single-quad applications and factory equipped with: Metering Jets – Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5′ Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.

The Edelbrock #1901 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1901 is calibrated for single-quad applications and factory equipped with: Metering Jets – Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5′ Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.

Edelbrock Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415.