Name: MDL 4150 750CFM D/P-CHROMATE ELECT CHOKE
Brand: Holley
SKU: 0-4779CE
Price: 849.99 USD

from

$849.99

MDL 4150 750CFM D/P-CHROMATE ELECT CHOKE

from

$49.99

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$47.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$22.99

The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23

Product Features:

Center Hung Floats
0.11 in. Needle Diameter
Viton® Needle Material
Sold Individually
Non-Adjustable Type

from

$20.99

Converts throttle lever on carburetor for proper use. For Edelbrock performer series carburetors only. Also accepts cruise control. Use appropriate throttle cable plate.

Product Features:

Converts Throttle Lever on Carb for Proper Use
For Edelbrock Performer Series Carburetors Only
Also Accepts Cruise Control
Use with Appropriate Throttle Cable Plate

from

$22.99

Edelbrock part #12415 Fuel Bowl Inverted Flare Fitting is a 3/8″ inverted flare fuel inlet fitting. The fitting is designed for use with Holley 2300, 4150, 4150HP and 4160 (center hung floats only), 4500, 4500HP and Rochester Quadrajet applications up to

Product Features:

Brass Material
3/8 in. Single Barb
7/8-20 in. Male End
5/8-18 in. Female Flare
With 3/8 in. Tube

from

$8.79

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$53.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$4.29

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$13.99

Product Features:

The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
Improper installation will void your warranty and may result in poor performance and engine or vehicle damage

from

$46.99

Stamped from 18 gauge steel. Triple-chrome plated. High quality finish. Great looks. Works with all 5.152 inch carburetors. Base knock-outs for use with crankcase ventilation.

Product Features:

Stamped From 18-Gauge Steel
Triple-Chrome Plated
High-Quality Finish
Great Looks
Works With All 5.125 in. Carbs
Base Knock-Outs For Use w/Crankcase Ventilation

from

$14.99

The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45

Product Features:

Fits Holley® Carburetors With Center Hung Fuel Bowl
Includes Adjusting Nut
Includes Locking Screw
Includes O-Ring
Includes Washers

from

$116.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$66.99

Product Features:

Customize Carburetor Calibration and Performance
Owners Manual has Assembly Help
Includes Metering Rod Retaining Spring
Includes Metering Rods
Includes Metering Jets
Includes Step-Up Springs

from

$223.99

Continental electronic throttle bodies are the genuine OEM part. Continental sensors are made and manufactured to the highest quality and original equipment specifications. They are identical in fit, form, and function and provide the genuine quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation. Electronic throttle bodies are essential in optimizing fuel economy and ensure your vehicle is running at peak performance and efficiency.

Product Features:

The exact OEM part
Exact form, fit, and function
Easy installation
Durable robust design
Made in ISO certified facilites

from

$43.99

The Edelbrock #12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “lift” will directly

Product Features:

Multi-Color
Plastic Material
Fits Holley® 2300, 4150, And 4160 Carburetors
Set of 8
Made In The USA

from

$143.99

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:

Serrated/Helix Design For Optimum Airflow (US PAT 07055513)
Precision Machined From 6061-T6 Aluminum
Installation Is a Snap

from

$14.99

The Edelbrock 94 #12456 Carburetor Jets .056″ Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:

56 Maximum Jet Size
0.055 in. Orifice Diameter
1/14-32 in. Thread Size
Standard Main Jet Type
Set of 2

from

$24.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
Undergoes extensive testing and validation for proper performance and peak reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$20.99

The Edelbrock #12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock #12371 fits Holley 4160 carburetors.

Product Features:

Nitrile Rubber Material
Metering Block Type
Set of 4
Fits Holley® 4160 Carburetors
Made In The USA

from

$271.99

This replacement intake manifold runner control motor matches the fit and function of the original equipment motor on specified vehicles. It’s designed with factory-style electrical connectors for a direct installation.

Product Features:

Ideal replacement – this intake manifold runner motor directly replaces the original motor on specified vehicle years, makes and models
Durable construction – this part is made of quality materials and components for long-lasting, reliable service
Cost-effective solution – offers original equipment quality at competitive price
Trustworthy quality – backed by team of engineers in the United States

from

$17.99

These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:

Grade 5 socket head bolts are zinc plated for protection and appearance
Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
Washers Included

from

$227.99

The Intake Manifold Runner Control system is an emission control device intended to control the incoming air into the engine through a dual plane intake manifold. The runner control system consists of an intake manifold with two running planes, a long running chamber and a short running chamber. As the throttle plate opens and closes under normal driving conditions the pressure in the intake system will vary widely causing a variance in available oxygen in the combustion chamber. The ECM will provide the engine with the optimum oxygen amount using a control valve operating the air control plate.

Product Features: